| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jenkins 2.483 through 2.550 (both inclusive), LTS 2.492.1 through 2.541.1 (both inclusive) does not escape the user-provided description of the "Mark temporarily offline" offline cause, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Agent/Configure or Agent/Disconnect permission. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Free sp in error path to fix system crash
System crash seen during load/unload test in a loop,
[61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X.
[61110.467494] =============================================================================
[61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown()
[61110.467501] -----------------------------------------------------------------------------
[61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467515] Call Trace:
[61110.467516] <TASK>
[61110.467519] dump_stack_lvl+0x34/0x48
[61110.467526] slab_err.cold+0x53/0x67
[61110.467534] __kmem_cache_shutdown+0x16e/0x320
[61110.467540] kmem_cache_destroy+0x51/0x160
[61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280
[61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0
[61110.467616] ? do_syscall_64+0x5c/0x90
[61110.467619] ? exc_page_fault+0x62/0x150
[61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[61110.467626] </TASK>
[61110.467627] Disabling lock debugging due to kernel taint
[61110.467635] Object 0x0000000026f7e6e6 @offset=16000
[61110.467639] ------------[ cut here ]------------
[61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160
[61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160
[61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89
[61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282
[61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027
[61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0
[61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7
[61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000
[61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000
[61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0
[61110.467736] PKRU: 55555554
[61110.467737] Call Trace:
[61110.467738] <TASK>
[61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280
Free sp in the error path to fix the crash. |
| Improper Input Validation vulnerability.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected.
Tomcat did not validate that the host name provided via the SNI
extension was the same as the host name provided in the HTTP host header
field. If Tomcat was configured with more than one virtual host and the
TLS configuration for one of those hosts did not require client
certificate authentication but another one did, it was possible for a
client to bypass the client certificate authentication by sending
different host names in the SNI extension and the HTTP host header field.
The vulnerability only applies if client certificate authentication is
only enforced at the Connector. It does not apply if client certificate
authentication is enforced at the web application.
Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
md: suspend array while updating raid_disks via sysfs
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too. |
| ZoneMinder v1.36.34 is vulnerable to Command Injection in web/views/image.php. The application passes unsanitized user input directly to the exec() function. |
| mayswind ezbookkeeping versions 1.2.0 and earlier contain a critical vulnerability in JSON and XML file import processing. The application fails to validate nesting depth during parsing operations, allowing authenticated attackers to trigger denial of service conditions by uploading deeply nested malicious files. This results in CPU exhaustion, service degradation, or complete service unavailability. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: Implement settime64 as stub for MVM/MLD PTP
Since commit dfb073d32cac ("ptp: Return -EINVAL on ptp_clock_register if
required ops are NULL"), PTP clock registered through ptp_clock_register
is required to have ptp_clock_info.settime64 set, however, neither MVM
nor MLD's PTP clock implementation sets it, resulting in warnings when
the interface starts up, like
WARNING: drivers/ptp/ptp_clock.c:325 at ptp_clock_register+0x2c8/0x6b8, CPU#1: wpa_supplicant/469
CPU: 1 UID: 0 PID: 469 Comm: wpa_supplicant Not tainted 6.18.0+ #101 PREEMPT(full)
ra: ffff800002732cd4 iwl_mvm_ptp_init+0x114/0x188 [iwlmvm]
ERA: 9000000002fdc468 ptp_clock_register+0x2c8/0x6b8
iwlwifi 0000:01:00.0: Failed to register PHC clock (-22)
I don't find an appropriate firmware interface to implement settime64()
for iwlwifi MLD/MVM, thus instead create a stub that returns
-EOPTNOTSUPP only, suppressing the warning and allowing the PTP clock to
be registered. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't WARN for connections on invalid channels
It's not clear (to me) how exactly syzbot managed to hit this,
but it seems conceivable that e.g. regulatory changed and has
disabled a channel between scanning (channel is checked to be
usable by cfg80211_get_ies_channel_number) and connecting on
the channel later.
With one scenario that isn't covered elsewhere described above,
the warning isn't good, replace it with a (more informative)
error message. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Set correct protection_map[] for VM_NONE/VM_SHARED
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()
rtw_core_enable_beacon() reads 4 bytes from an address that is not a
multiple of 4. This results in a crash on some systems.
Do 1 byte reads/writes instead.
Unable to handle kernel paging request at virtual address ffff8000827e0522
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000
[ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13
Internal error: Oops: 0000000096000021 [#1] SMP
Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...]
CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY
Tainted: [W]=WARN
Hardware name: FriendlyElec NanoPC-T6 LTS (DT)
Workqueue: phy0 rtw_c2h_work [rtw88_core]
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : rtw_pci_read32+0x18/0x40 [rtw88_pci]
lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core]
sp : ffff800080cc3ca0
x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828
x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00
x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001
x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522
Call trace:
rtw_pci_read32+0x18/0x40 [rtw88_pci] (P)
rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core]
rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core]
rtw_c2h_work+0x50/0x98 [rtw88_core]
process_one_work+0x178/0x3f8
worker_thread+0x208/0x418
kthread+0x120/0x220
ret_from_fork+0x10/0x20
Code: d28fe202 8b020000 f9524400 8b214000 (b9400000)
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Avoid creating sub-groups asynchronously
The asynchronous creation of sub-groups by a delayed work could lead to a
NULL pointer dereference when the driver directory is removed before the
work completes.
The crash can be easily reproduced with the following commands:
# cd /sys/kernel/config/pci_ep/functions/pci_epf_test
# for i in {1..20}; do mkdir test && rmdir test; done
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
Call Trace:
configfs_register_group+0x3d/0x190
pci_epf_cfs_work+0x41/0x110
process_one_work+0x18f/0x350
worker_thread+0x25a/0x3a0
Fix this issue by using configfs_add_default_group() API which does not
have the deadlock problem as configfs_register_group() and does not require
the delayed work handler.
[mani: slightly reworded the description and added stable list] |
| IBM Cloud Pak System 2.3.3.6, 2.3.3.7, 2.3.4.0, 2.3.4.1, and 2.3.5.0 could disclose folder location information to an unauthenticated attacker that could aid in further attacks against the system. |
| The Complianz – GDPR/CCPA Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's cmplz-accept-link shortcode in all versions up to, and including, 7.4.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Frontend User Notes plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.1.0 via the 'funp_ajax_modify_notes' AJAX endpoint due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify arbitrary notes that do not belong to them. |
| The Context Blog theme for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.2.5 via the 'context_blog_modal_popup' due to insufficient restrictions on which posts can be included. This makes it possible for unauthenticated attackers to extract data from password protected, private, or draft posts that they should not have access to. |
| IBM DB2 Merge Backup for Linux, UNIX and Windows 12.1.0.0 could allow an attacker to access sensitive information in memory due to the buffer not properly clearing resources. |
| The Video Share VOD – Turnkey Video Site Builder Script plugin for WordPress is vulnerable to Stored Cross-Site Scripting via plugin settings in all versions up to, and including, 2.7.11 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with editor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to payment bypass due to insufficient verification of data authenticity on the 'process_paypal_sdk_payment' function in all versions up to, and including, 6.0.6.9. This is due to the plugin trusting client-supplied values for payment verification without validating that the payment actually went through PayPal. This makes it possible for unauthenticated attackers to bypass paid registration by manipulating payment status and activating their account without completing a real PayPal payment. |
| IBM DB2 Recovery Expert for LUW 5.5 Interim Fix 002 could allow a remote attacker to conduct phishing attacks, using an open redirect attack. By persuading a victim to visit a specially crafted Web site, a remote attacker could exploit this vulnerability to spoof the URL displayed to redirect a user to a malicious Web site that would appear to be trusted. This could allow the attacker to obtain highly sensitive information or conduct further attacks against the victim. |
| IBM DB2 Recovery Expert for LUW 5.5 Interim Fix 002 IBM Db2 Recovery Expert for Linux, UNIX and Windows is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. |
