| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470 |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix preempt count leak in napi poll tracepoint
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag] |
| An authorization issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. An app may be able to access sensitive user data. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.4, iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, visionOS 26.4. Processing maliciously crafted web content may lead to an unexpected process crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: fix ARM64 alignment fault in multipath hash seed
`struct sysctl_fib_multipath_hash_seed` contains two u32 fields
(user_seed and mp_seed), making it an 8-byte structure with a 4-byte
alignment requirement.
In `fib_multipath_hash_from_keys()`, the code evaluates the entire
struct atomically via `READ_ONCE()`:
mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed;
While this silently works on GCC by falling back to unaligned regular
loads which the ARM64 kernel tolerates, it causes a fatal kernel panic
when compiled with Clang and LTO enabled.
Commit e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire
when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire
instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs
under Clang LTO. Since the macro evaluates the full 8-byte struct,
Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly
requires `ldar` to be naturally aligned, thus executing it on a 4-byte
aligned address triggers a strict Alignment Fault (FSC = 0x21).
Fix the read side by moving the `READ_ONCE()` directly to the `u32`
member, which emits a safe 32-bit `ldar Wn`.
Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire
struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis
shows that Clang splits this 8-byte write into two separate 32-bit
`str` instructions. While this avoids an alignment fault, it destroys
atomicity and exposes a tear-write vulnerability. Fix this by
explicitly splitting the write into two 32-bit `WRITE_ONCE()`
operations.
Finally, add the missing `READ_ONCE()` when reading `user_seed` in
`proc_fib_multipath_hash_seed()` to ensure proper pairing and
concurrency safety. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Return the correct value in vmw_translate_ptr functions
Before the referenced fixes these functions used a lookup function that
returned a pointer. This was changed to another lookup function that
returned an error code with the pointer becoming an out parameter.
The error path when the lookup failed was not changed to reflect this
change and the code continued to return the PTR_ERR of the now
uninitialized pointer. This could cause the vmw_translate_ptr functions
to return success when they actually failed causing further uninitialized
and OOB accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: align net_device lifecycle with bind/unbind
Currently, the net_device is allocated in ncm_alloc_inst() and freed in
ncm_free_inst(). This ties the network interface's lifetime to the
configuration instance rather than the USB connection (bind/unbind).
This decoupling causes issues when the USB gadget is disconnected where
the underlying gadget device is removed. The net_device can outlive its
parent, leading to dangling sysfs links and NULL pointer dereferences
when accessing the freed gadget device.
Problem 1: NULL pointer dereference on disconnect
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Call trace:
__pi_strlen+0x14/0x150
rtnl_fill_ifinfo+0x6b4/0x708
rtmsg_ifinfo_build_skb+0xd8/0x13c
rtmsg_ifinfo+0x50/0xa0
__dev_notify_flags+0x4c/0x1f0
dev_change_flags+0x54/0x70
do_setlink+0x390/0xebc
rtnl_newlink+0x7d0/0xac8
rtnetlink_rcv_msg+0x27c/0x410
netlink_rcv_skb+0x134/0x150
rtnetlink_rcv+0x18/0x28
netlink_unicast+0x254/0x3f0
netlink_sendmsg+0x2e0/0x3d4
Problem 2: Dangling sysfs symlinks
console:/ # ls -l /sys/class/net/ncm0
lrwxrwxrwx ... /sys/class/net/ncm0 ->
/sys/devices/platform/.../gadget.0/net/ncm0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/ncm0
ls: .../gadget.0/net/ncm0: No such file or directory
Move the net_device allocation to ncm_bind() and deallocation to
ncm_unbind(). This ensures the network interface exists only when the
gadget function is actually bound to a configuration.
To support pre-bind configuration (e.g., setting interface name or MAC
address via configfs), cache user-provided options in f_ncm_opts
using the gether_opts structure. Apply these cached settings to the
net_device upon creation in ncm_bind().
Preserve the use-after-free fix from commit 6334b8e4553c ("usb: gadget:
f_ncm: Fix UAF ncm object at re-bind after usb ep transport error").
Check opts->net in ncm_set_alt() and ncm_disable() to ensure
gether_disconnect() runs only if a connection was established. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free and list corruption on sender error
The analysis from Breno:
When the SMI sender returns an error, smi_work() delivers an error
response but then jumps back to restart without cleaning up properly:
1. intf->curr_msg is not cleared, so no new message is pulled
2. newmsg still points to the message, causing sender() to be called
again with the same message
3. If sender() fails again, deliver_err_response() is called with
the same recv_msg that was already queued for delivery
This causes list_add corruption ("list_add double add") because the
recv_msg is added to the user_msgs list twice. Subsequently, the
corrupted list leads to use-after-free when the memory is freed and
reused, and eventually a NULL pointer dereference when accessing
recv_msg->done.
The buggy sequence:
sender() fails
-> deliver_err_response(recv_msg) // recv_msg queued for delivery
-> goto restart // curr_msg not cleared!
sender() fails again (same message!)
-> deliver_err_response(recv_msg) // tries to queue same recv_msg
-> LIST CORRUPTION
Fix this by freeing the message and setting it to NULL on a send error.
Also, always free the newmsg on a send error, otherwise it will leak. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: etas_es58x: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed()
cxl_payload_from_user_allowed() casts and dereferences the input
payload without first verifying its size. When a raw mailbox command
is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG,
which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer,
triggering a KASAN splat:
BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683
Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258
CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xce/0x650 mm/kasan/report.c:482
kasan_report+0xce/0x100 mm/kasan/report.c:595
memcmp+0x176/0x1d0 lib/string.c:683
uuid_equal include/linux/uuid.h:73 [inline]
cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline]
cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline]
cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline]
cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643
__cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline]
cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdaf331ba79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79
RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003
RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768
</TASK>
Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate
the payload is large enough. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix NULL pointer dereference of mgmt_chann
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
libie: don't unroll if fwlog isn't supported
The libie_fwlog_deinit() function can be called during driver unload
even when firmware logging was never properly initialized. This led to call
trace:
[ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI
[ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full)
[ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020
[ 148.576182] RIP: 0010:__dev_printk+0x16/0x70
[ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98
[ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202
[ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000
[ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88
[ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000
[ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70
[ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8
[ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000
[ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0
[ 148.576252] Call Trace:
[ 148.576258] <TASK>
[ 148.576269] _dev_warn+0x7c/0x96
[ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog]
[ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe]
[ 148.576342] pci_device_remove+0x42/0xb0
[ 148.576354] device_release_driver_internal+0x19c/0x200
[ 148.576365] driver_detach+0x48/0x90
[ 148.576372] bus_remove_driver+0x6d/0xf0
[ 148.576383] pci_unregister_driver+0x2e/0xb0
[ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe]
[ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0
[ 148.576446] do_syscall_64+0x7f/0x980
It can be reproduced by trying to unload ixgbe driver in recovery mode.
Fix that by checking if fwlog is supported before doing unroll. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: complete pending data exchange on device close
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies 4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
