| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Undefined behavior in the WebRTC: Signaling component. This vulnerability affects Firefox < 149, Firefox ESR < 140.9, Thunderbird < 149, and Thunderbird < 140.9. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_mp4_module module, which might allow an attacker to trigger a buffer over-read or over-write to the NGINX worker memory resulting in its termination or possibly code execution, using a specially crafted MP4 file. This issue affects NGINX Open Source and NGINX Plus if it is built with the ngx_http_mp4_module module and the mp4 directive is used in the configuration file. Additionally, the attack is possible only if an attacker can trigger the processing of a specially crafted MP4 file with the ngx_http_mp4_module module.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_mail_smtp_module module due to the improper handling of CRLF sequences in DNS responses. This allows an attacker-controlled DNS server to inject arbitrary headers into SMTP upstream requests, leading to potential request manipulation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_stream_ssl_module module due to the improper handling of revoked certificates when configured with the ssl_verify_client on and ssl_ocsp on directives, allowing the TLS handshake to succeed even after an OCSP check identifies the certificate as revoked.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_dav_module module that might allow an attacker to trigger a buffer overflow to the NGINX worker process; this vulnerability may result in termination of the NGINX worker process or modification of source or destination file names outside the document root. This issue affects NGINX Open Source and NGINX Plus when the configuration file uses DAV module MOVE or COPY methods, prefix location (nonregular expression location configuration), and alias directives. The integrity impact is constrained because the NGINX worker process user has low privileges and does not have access to the entire system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Craft CMS is a content management system (CMS). From version 5.6.0 to before version 5.9.13, a Remote Code Execution (RCE) vulnerability exists in Craft CMS, it can be exploited by any authenticated user with control panel access. This is a bypass of a previous fix. The existing patches add cleanseConfig() to assembleLayoutFromPost() and various FieldsController actions to strip Yii2 behavior/event injection keys ("as" and "on" prefixed keys). However, the fieldLayouts parameter in ElementIndexesController::actionFilterHud() is passed directly to FieldLayout::createFromConfig() without any sanitization, enabling the same behavior injection attack chain. This issue has been patched in version 5.9.13. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.8 and from version 5.0.0-RC1 to before version 5.9.14, a low-privileged authenticated user can read private asset content by calling assets/edit-image with an arbitrary assetId that they are not authorized to view. The endpoint returns image bytes (or a preview redirect) without enforcing a per-asset view authorization check, leading to potential unauthorized disclosure of private files. This issue has been patched in versions 4.17.8 and 5.9.14. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.8 and from version 5.0.0-RC1 to before version 5.9.14, guest users can access Config Sync updater index, obtain signed data, and execute state-changing Config Sync actions (regenerate-yaml, apply-yaml-changes) without authentication. This issue has been patched in versions 4.17.8 and 5.9.14. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.8 and from version 5.0.0-RC1 to before version 5.9.14, an unauthenticated user can call assets/generate-transform with a private assetId, receive a valid transform URL, and fetch transformed image bytes. The endpoint is anonymous and does not enforce per-asset authorization before returning the transform URL. This issue has been patched in versions 4.17.8 and 5.9.14. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.8 and from version 5.0.0-RC1 to before version 5.9.14, a low-privileged authenticated user can call assets/image-editor with the ID of a private asset they cannot view and still receive editor response data, including focalPoint. The endpoint returns private editing metadata without per-asset authorization validation. This issue has been patched in versions 4.17.8 and 5.9.14. |
| Craft CMS is a content management system (CMS). From version 5.3.0 to before version 5.9.14, an authenticated control panel user with only accessCp can move entries across sections via POST /actions/entries/move-to-section, even when they do not have saveEntries:{sectionUid} permission for either source or destination section. This issue has been patched in version 5.9.14. |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.7.0, Wallos endpoints/logos/search.php accepts HTTP_PROXY and HTTPS_PROXY environment variables without validation, enabling SSRF via proxy hijacking. The server performs DNS resolution on user-supplied search terms, which can be controlled by attackers to trigger outbound requests to arbitrary domains. This issue has been patched in version 4.7.0. |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.7.0, the SSRF fix applied in version 4.6.2 for CVE-2026-30839 and CVE-2026-30840 is incomplete. The validate_webhook_url_for_ssrf() protection was added to the test* notification endpoints but not to the corresponding save* endpoints. An authenticated user can save an internal/private IP address as a notification URL, and when the cron job sendnotifications.php executes, the request is sent to the internal IP without any SSRF validation. This issue has been patched in version 4.7.0. |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.7.0, a stored cross-site scripting (XSS) vulnerability in the payment method rename endpoint allows any authenticated user to inject arbitrary JavaScript that executes when any user visits the Settings, Subscriptions, or Statistics pages. Combined with the wallos_login authentication cookie lacking the HttpOnly flag, this enables full session hijacking. This issue has been patched in version 4.7.0. |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.7.0, the patch introduced in commit e8a513591 (CVE-2026-30840) added SSRF protection to notification test endpoints but left three additional attack surfaces unprotected: the AI Ollama host parameter, the AI recommendations endpoint, and the notification cron job. An authenticated user can reach internal network services, cloud metadata endpoints (AWS IMDSv1, GCP, Azure IMDS), or localhost-bound services by supplying a crafted URL to any of these endpoints. This issue has been patched in version 4.7.0. |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.7.2, password reset tokens in Wallos never expire. The password_resets table includes a created_at timestamp column, but the token validation logic never checks it. A password reset token remains valid indefinitely until it is used, allowing an attacker who intercepts a reset link at any point to use it days, weeks, or months later. This issue has been patched in version 4.7.2. |
| Astro is a web framework. Prior to version 10.0.2, the @astrojs/vercel serverless entrypoint reads the x-astro-path header and x_astro_path query parameter to rewrite the internal request path, with no authentication whatsoever. On deployments without Edge Middleware, this lets anyone bypass Vercel's platform-level path restrictions entirely. The override preserves the original HTTP method and body, so this isn't limited to GET. POST, PUT, DELETE all land on the rewritten path. A Firewall rule blocking /admin/* does nothing when the request comes in as POST /api/health?x_astro_path=/admin/delete-user. This issue has been patched in version 10.0.2. |
| Astro is a web framework. From version 2.10.10 to before version 5.18.1, this issue concerns Astro's remotePatterns path enforcement for remote URLs used by server-side fetchers such as the image optimization endpoint. The path matching logic for /* wildcards is unanchored, so a pathname that contains the allowed prefix later in the path can still match. As a result, an attacker can fetch paths outside the intended allowlisted prefix on an otherwise allowed host. This issue has been patched in version 5.18.1. |
| Froxlor is open source server administration software. Prior to version 2.3.5, the DomainZones.add API endpoint (accessible to customers with DNS enabled) does not validate the content field for several DNS record types (LOC, RP, SSHFP, TLSA). An attacker can inject newlines and BIND zone file directives (e.g. $INCLUDE) into the zone file that gets written to disk when the DNS rebuild cron job runs. This issue has been patched in version 2.3.5. |
| sbt is a build tool for Scala, Java, and others. From version 0.9.5 to before version 1.12.7, on Windows, sbt uses Process("cmd", "/c", ...) to run VCS commands (git, hg, svn). The URI fragment (branch, tag, revision) is user-controlled via the build definition and passed to these commands without validation. Because cmd /c interprets &, |, and ; as command separators, a malicious fragment can execute arbitrary commands. This issue has been patched in version 1.12.7. |
