| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Add a per-VF limit on number of FDIR filters
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imx-irqsteer: Handle runtime power management correctly
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mos7840: fix crash on resume
Since commit c49cfa917025 ("USB: serial: use generic method if no
alternative is provided in usb serial layer"), USB serial core calls the
generic resume implementation when the driver has not provided one.
This can trigger a crash on resume with mos7840 since support for
multiple read URBs was added back in 2011. Specifically, both port read
URBs are now submitted on resume for open ports, but the context pointer
of the second URB is left set to the core rather than mos7840 port
structure.
Fix this by implementing dedicated suspend and resume functions for
mos7840.
Tested with Delock 87414 USB 2.0 to 4x serial adapter.
[ johan: analyse crash and rewrite commit message; set busy flag on
resume; drop bulk-in check; drop unnecessary usb_kill_urb() ] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix scv instruction crash with kexec
kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.
Change the kexec sequence to disable AIL after other CPUs have been
brought down.
As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-switch, Create ingress ACL when needed
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot
Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/lima: fix shared irq handling on driver remove
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt.
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.
Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.
With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:
[ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[ 1.215719] --- interrupt: 200
[ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8
Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedf: Make qedf_execute_tmf() non-preemptible
Stop calling smp_processor_id() from preemptible code in
qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel.
[ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646
[ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip finding free audio for unknown engine_id
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_omap: Implementation of Errata i2310
As per Errata i2310[0], Erroneous timeout can be triggered,
if this Erroneous interrupt is not cleared then it may leads
to storm of interrupts, therefore apply Errata i2310 solution.
[0] https://www.ti.com/lit/pdf/sprz536 page 23 |
| In the Linux kernel, the following vulnerability has been resolved:
ftruncate: pass a signed offset
The old ftruncate() syscall, using the 32-bit off_t misses a sign
extension when called in compat mode on 64-bit architectures. As a
result, passing a negative length accidentally succeeds in truncating
to file size between 2GiB and 4GiB.
Changing the type of the compat syscall to the signed compat_off_t
changes the behavior so it instead returns -EINVAL.
The native entry point, the truncate() syscall and the corresponding
loff_t based variants are all correct already and do not suffer
from this mistake. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix DIO failure due to insufficient transaction credits
The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits(). This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.
Extent tree manipulations do often extend the current transaction but not
in all of the cases. For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents. Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error. This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.
To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().
Heming Zhao said:
------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"
PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA"
#0 machine_kexec at ffffffff8c069932
#1 __crash_kexec at ffffffff8c1338fa
#2 panic at ffffffff8c1d69b9
#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
#11 dio_complete at ffffffff8c2b9fa7
#12 do_blockdev_direct_IO at ffffffff8c2bc09f
#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
#14 generic_file_direct_write at ffffffff8c1dcf14
#15 __generic_file_write_iter at ffffffff8c1dd07b
#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
#17 aio_write at ffffffff8c2cc72e
#18 kmem_cache_alloc at ffffffff8c248dde
#19 do_io_submit at ffffffff8c2ccada
#20 do_syscall_64 at ffffffff8c004984
#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: cxacru: fix endpoint checking in cxacru_bind()
Syzbot is still reporting quite an old issue [1] that occurs due to
incomplete checking of present usb endpoints. As such, wrong
endpoints types may be used at urb sumbitting stage which in turn
triggers a warning in usb_submit_urb().
Fix the issue by verifying that required endpoint types are present
for both in and out endpoints, taking into account cmd endpoint type.
Unfortunately, this patch has not been tested on real hardware.
[1] Syzbot report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
...
Call Trace:
cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649
cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760
cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209
usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055
cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363
usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:517 [inline]
really_probe+0x23c/0xcd0 drivers/base/dd.c:595
__driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747
driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777
__device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894
bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427
__device_attach+0x228/0x4a0 drivers/base/dd.c:965
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487
device_add+0xc2f/0x2180 drivers/base/core.c:3354
usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238
usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293 |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix XDP program unloading while removing the driver
The commit 6533e558c650 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: reject claimed-as-LCP but actually malformed packets
Since 'ppp_async_encode()' assumes valid LCP packets (with code
from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that
LCP packet has an actual body beyond PPP_LCP header bytes, and
reject claimed-as-LCP but actually malformed data otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
Syzbot has identified a bug in usbcore (see the Closes: tag below)
caused by our assumption that the reserved bits in an endpoint
descriptor's bEndpointAddress field will always be 0. As a result of
the bug, the endpoint_is_duplicate() routine in config.c (and possibly
other routines as well) may believe that two descriptors are for
distinct endpoints, even though they have the same direction and
endpoint number. This can lead to confusion, including the bug
identified by syzbot (two descriptors with matching endpoint numbers
and directions, where one was interrupt and the other was bulk).
To fix the bug, we will clear the reserved bits in bEndpointAddress
when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1
specs say these bits are "Reserved, reset to zero".) This requires us
to make a copy of the descriptor earlier in usb_parse_endpoint() and
use the copy instead of the original when checking for duplicates. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid splat in pskb_pull_reason
syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug
hint in pskb_may_pull.
We'd like to retain this debug check because it might hint at integer
overflows and other issues (kernel code should pull headers, not huge
value).
In bpf case, this splat isn't interesting at all: such (nonsensical)
bpf programs are typically generated by a fuzzer anyway.
Do what Eric suggested and suppress such warning.
For CONFIG_DEBUG_NET=n we don't need the extra check because
pskb_may_pull will do the right thing: return an error without the
WARN() backtrace. |
