| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix double-free in tipc_buf_append()
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: restrict several matches to inet family
This is a partial revert of:
commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
to allow ipv4 and ipv6 only.
- xt_mac
- xt_owner
- xt_physdev
These extensions are not used by ebtables in userspace.
Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4
specific. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable()
In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read()
in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit
NULL pointer while trying to access the mutex. We need the connector to
be set before that. Unlike in legacy cases with flag
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised
in bridge_attach(), so add the mhdp->connector_ptr in device structure
to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to
avoid possible NULL pointer dereference in recovery paths like
modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix dirty mapping checking in passthrough mode switching
As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata
object across inactive and active DM tables"), dm-cache assumed table
reload occurs after suspension, while LVM's table preload breaks this
assumption. The dirty mapping check for passthrough mode was designed
around this assumption and is performed during table creation, causing
the check to fail with preload while metadata updates are ongoing. This
risks loading dirty mappings into passthrough mode, resulting in data
loss.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty mappings
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Preload a table in passthrough mode
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
3. Write to the first cache block to make it dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
4. Resume the inactive table. Now it's possible to load the dirty block
into passthrough mode.
dmsetup resume cache
Fix by moving the checks to the preresume phase to support table
preloading. Also remove the unused function dm_cache_metadata_all_clean. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted" |
| A vulnerability was found in Wildfly’s management interface. Due to the lack of limitation of sockets for the management interface, it may be possible to cause a denial of service hitting the nofile limit as there is no possibility to configure or set a maximum number of connections. |
| A flaw was found in gnuplot. The X11_graphics() function may lead to a segmentation fault and cause a system crash. |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, the Glances XML-RPC server (glances -s, implemented in glances/server.py) does not validate the HTTP Host header, leaving it vulnerable to DNS rebinding attacks. An attacker can exploit DNS rebinding to exfiltrate the full system monitoring dataset from a victim's browser. This vulnerability is fixed in 4.5.5. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.6, unchecked passwords maximums allow for an arbitrarily large password to be passed into the login API. This spikes CPU and memory, and after testing, crashes, heavily lags any container created, and has even made my docker daemon start to send errors with status code 500 even after the container was destroyed. This vulnerability is fixed in 2.63.6. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.16, a scoped, non-admin File Browser user holding only the Create permission can delete arbitrary files outside their scope (other tenants' data, and the application's own database) via the upload failure-cleanup path. ScopedFs.RemoveAll is the one dereferencing operation that skips the symlink guard every other method enforces. The direct-upload handler runs RemoveAll on the user-controlled path during failed-upload cleanup, gated only by Perm.Create. If an escaping directory symlink already exists inside the user's scope, an authenticated create-only user can delete an out-of-scope target, bypassing both the ScopedFs boundary and the Perm.Delete gate. This vulnerability is fixed in 2.63.16. |
| pnpm is a package manager. Prior to 10.33.4 and 11.0.7, a malicious codeload.github.com server can serve whatever tarball it wants and pnpm will install it regardless of the lockfile. The lockfile does not store the hash of the dependencies from https://codeload.github.com. This means that if this server was compromised or a person's machine configuration was compromised, pnpm would download and install these dependencies. This vulnerability is fixed in 10.33.4 and 11.0.7. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's tarball extraction worker skips integrity verification when the integrity field is absent from the lockfile resolution. If an attacker can both modify pnpm-lock.yaml to remove the integrity: field and cause the referenced registry URL to serve altered package content, pnpm install --frozen-lockfile can install the altered package without an integrity error. npm's npm ci enforces integrity by default; pnpm's behavior of silently skipping verification is a pnpm-specific fail-open gap. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm can persist package-manager bootstrap metadata in the first YAML document of pnpm-lock.yaml. Before the patch, direct pnpm execution trusted an already resolved packageManagerDependencies entry when the committed env lockfile contained matching pnpm and @pnpm/exe versions. A malicious repository could therefore commit package-manager lockfile package records and snapshots that bypassed fresh package-manager resolution, then cause pnpm to install and execute bytes selected by that committed lockfile state during automatic version switching. This vulnerability is fixed in 10.34.2 and 11.5.3. |
| Trivy is a security scanner. Prior to 0.71.1, when Trivy downloads an OCI artifact, it uses the org.opencontainers.image.title annotation from the artifact manifest as the destination filename without validation. An attacker who can make Trivy fetch an attacker-controlled artifact can supply a crafted annotation that resolves to a path outside the intended destination, causing Trivy to write the layer content to an arbitrary location on the host filesystem. This vulnerability is fixed in 0.71.1. |
| LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.5, LibreChat's MCP OAuth implementation does not validate that the resource parameter from OAuth Protected Resource metadata (RFC 9728) matches the configured MCP server URL, allowing a malicious MCP server to steal access tokens intended for a legitimate server. This vulnerability is fixed in 0.8.5. |
| socat versions 1.8.0.0 through 1.8.1.1 contain a heap-based buffer overflow vulnerability that allows a malicious SOCKS5 proxy server to overwrite adjacent heap memory by exploiting a sign-extension flaw in the DOMAINNAME reply parser. During connection setup, the domain name length byte is read through a signed char field causing a negative bytes_to_read value that is implicitly converted to size_t, resulting in an unbounded heap write into the 262-byte reply buffer with attacker-controlled size and content. |
