| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't dump the entire memory region
The current logic at cper_print_fw_err() doesn't check if the
error record length is big enough to handle offset. On a bad firmware,
if the ofset is above the actual record, length -= offset will
underflow, making it dump the entire memory.
The end result can be:
- the logic taking a lot of time dumping large regions of memory;
- data disclosure due to the memory dumps;
- an OOPS, if it tries to dump an unmapped memory region.
Fix it by checking if the section length is too small before doing
a hex dump.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix post open error handling
Closing a queue doesn't guarantee that all associated page pools are
terminated right away, let the refcounting do the work instead of
releasing the zcrx ctx directly. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx25821: Fix a resource leak in cx25821_dev_setup()
Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate user queue size constraints
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior. |
| Inappropriate implementation in Speech in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Views in Google Chrome prior to 148.0.7778.96 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Skip discovery table for offline dies
This warning can be triggered if NUMA is disabled and the system
boots with fewer CPUs than the number of CPUs in die 0.
WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore]
Currently, the discovery table continues to be parsed even if all CPUs
in the associated die are offline. This can lead to an array overflow
at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may
trigger the warning above or cause other issues. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: Drop large packets with UDP encap
syzbot reported a WARN on my patch series [1]. The actual issue is an
overflow of 16-bit UDP length field, and it exists in the upstream code.
My series added a debug WARN with an overflow check that exposed the
issue, that's why syzbot tripped on my patches, rather than on upstream
code.
syzbot's repro:
r0 = socket$pppl2tp(0x18, 0x1, 0x1)
r1 = socket$inet6_udp(0xa, 0x2, 0x0)
connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c)
connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32)
writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1)
It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP
encapsulation, and l2tp_xmit_core doesn't check for overflows when it
assigns the UDP length field. The value gets trimmed to 16 bites.
Add an overflow check that drops oversized packets and avoids sending
packets with trimmed UDP length to the wire.
syzbot's stack trace (with my patch applied):
len >= 65536u
WARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957
WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957
WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957
Modules linked in:
CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline]
RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline]
RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327
Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4f
RSP: 0018:ffffc90003d67878 EFLAGS: 00010293
RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000
RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffff
RBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004
R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900
R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000
FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0
Call Trace:
<TASK>
pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
sock_write_iter+0x503/0x550 net/socket.c:1195
do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1
vfs_writev+0x33c/0x990 fs/read_write.c:1059
do_writev+0x154/0x2e0 fs/read_write.c:1105
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f636479c629
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629
RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0
</TASK>
[1]: https://lore.kernel.org/all/20260226201600.222044-1-alice.kernel@fastmail.im/ |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Disable all pin interrupts during probe
A chip being probed may have the interrupt-on-change feature enabled on
some of its pins, for example after a reboot. This can cause the chip to
generate interrupts for pins that don't have a registered nested handler,
which leads to a kernel crash such as below:
[ 7.928897] Unable to handle kernel read from unreadable memory at virtual address 00000000000000ac
[ 7.932314] Mem abort info:
[ 7.935081] ESR = 0x0000000096000004
[ 7.938808] EC = 0x25: DABT (current EL), IL = 32 bits
[ 7.944094] SET = 0, FnV = 0
[ 7.947127] EA = 0, S1PTW = 0
[ 7.950247] FSC = 0x04: level 0 translation fault
[ 7.955101] Data abort info:
[ 7.957961] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 7.963421] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 7.968447] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 7.973734] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000089b7000
[ 7.980148] [00000000000000ac] pgd=0000000000000000, p4d=0000000000000000
[ 7.986913] Internal error: Oops: 0000000096000004 [#1] SMP
[ 7.992545] Modules linked in:
[ 8.073678] CPU: 0 UID: 0 PID: 81 Comm: irq/18-4-0025 Not tainted 7.0.0-rc6-gd2b5a1f931c8-dirty #199
[ 8.073689] Hardware name: Khadas VIM3 (DT)
[ 8.073692] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 8.094639] pc : _raw_spin_lock_irq+0x40/0x80
[ 8.098970] lr : handle_nested_irq+0x2c/0x168
[ 8.098979] sp : ffff800082b2bd20
[ 8.106599] x29: ffff800082b2bd20 x28: ffff800080107920 x27: ffff800080104d88
[ 8.106611] x26: ffff000003298080 x25: 0000000000000001 x24: 000000000000ff00
[ 8.113707] x23: 0000000000000001 x22: 0000000000000000 x21: 000000000000000e
[ 8.120850] x20: 0000000000000000 x19: 00000000000000ac x18: 0000000000000000
[ 8.135046] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 8.135062] x14: ffff800081567ea8 x13: ffffffffffffffff x12: 0000000000000000
[ 8.135070] x11: 00000000000000c0 x10: 0000000000000b60 x9 : ffff800080109e0c
[ 8.135078] x8 : 1fffe0000069dbc1 x7 : 0000000000000001 x6 : ffff0000034ede00
[ 8.135086] x5 : 0000000000000000 x4 : ffff0000034ede08 x3 : 0000000000000001
[ 8.163460] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 00000000000000ac
[ 8.170560] Call trace:
[ 8.180094] _raw_spin_lock_irq+0x40/0x80 (P)
[ 8.184443] mcp23s08_irq+0x248/0x358
[ 8.184462] irq_thread_fn+0x34/0xb8
[ 8.184470] irq_thread+0x1a4/0x310
[ 8.195093] kthread+0x13c/0x150
[ 8.198309] ret_from_fork+0x10/0x20
[ 8.201850] Code: d65f03c0 d2800002 52800023 f9800011 (885ffc01)
[ 8.207931] ---[ end trace 0000000000000000 ]---
This issue has always been present, but has been latent until commit
"f9f4fda15e72" ("pinctrl: mcp23s08: init reg_defaults from HW at probe and
switch cache type"), which correctly removed reg_defaults from the regmap
and as a side effect changed the behavior of the interrupt handler so that
the real value of the MCP_GPINTEN register is now being read from the chip
instead of using a bogus 0 default value; a non-zero value for this
register can trigger the invocation of a nested handler which may not exist
(yet).
Fix this issue by disabling all pin interrupts during initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate MTU against usable frame size on bind
AF_XDP bind currently accepts zero-copy pool configurations without
verifying that the device MTU fits into the usable frame space provided
by the UMEM chunk.
This becomes a problem since we started to respect tailroom which is
subtracted from chunk_size (among with headroom). 2k chunk size might
not provide enough space for standard 1500 MTU, so let us catch such
settings at bind time. Furthermore, validate whether underlying HW will
be able to satisfy configured MTU wrt XSK's frame size multiplied by
supported Rx buffer chain length (that is exposed via
net_device::xdp_zc_max_segs). |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: add missing negotiate_features op to Hyper-V ops table
Commit a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by
negotiating supported features") added the .negotiate_features callback
to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot
to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL
on Hyper-V VMs.
During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(),
which unconditionally dereferences hw->mac.ops.negotiate_features().
On Hyper-V this results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...]
Workqueue: events work_for_cpu_fn
RIP: 0010:0x0
[...]
Call Trace:
ixgbevf_negotiate_api+0x66/0x160 [ixgbevf]
ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf]
ixgbevf_probe+0x20f/0x4a0 [ixgbevf]
local_pci_probe+0x50/0xa0
work_for_cpu_fn+0x1a/0x30
[...]
Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and
wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP
gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Fix errors in IRQ cleanup
IRQs are enabled through sdca_irq_populate() from component probe
using devm_request_threaded_irq(), this however means the IRQs can
persist if the sound card is torn down. Some of the IRQ handlers
store references to the card and the kcontrols which can then
fail. Some detail of the crash was explained in [1].
Generally it is not advised to use devm outside of bus probe, so
the code is updated to not use devm. The IRQ requests are not moved
to bus probe time as it makes passing the snd_soc_component into
the IRQs very awkward and would the require a second step once the
component is available, so it is simpler to just register the IRQs
at this point, even though that necessitates some manual cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: account XFRMA_IF_ID in aevent size calculation
xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then
build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is
set.
xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states
with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0)
in xfrm_get_ae(), turning a malformed netlink interaction into a kernel
panic.
Account XFRMA_IF_ID in the size calculation unconditionally and replace
the BUG_ON with normal error unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix zero size inode with non-zero size after log replay
When logging that an inode exists, as part of logging a new name or
logging new dir entries for a directory, we always set the generation of
the logged inode item to 0. This is to signal during log replay (in
overwrite_item()), that we should not set the i_size since we only logged
that an inode exists, so the i_size of the inode in the subvolume tree
must be preserved (as when we log new names or that an inode exists, we
don't log extents).
This works fine except when we have already logged an inode in full mode
or it's the first time we are logging an inode created in a past
transaction, that inode has a new i_size of 0 and then we log a new name
for the inode (due to a new hardlink or a rename), in which case we log
an i_size of 0 for the inode and a generation of 0, which causes the log
replay code to not update the inode's i_size to 0 (in overwrite_item()).
An example scenario:
mkdir /mnt/dir
xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo
sync
xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo
ln /mnt/dir/foo /mnt/dir/bar
xfs_io -c "fsync" /mnt/dir
<power fail>
After log replay the file remains with a size of 64K. This is because when
we first log the inode, when we fsync file foo, we log its current i_size
of 0, and then when we create a hard link we log again the inode in exists
mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we
add to the log tree, so during log replay overwrite_item() sees that the
generation is 0 and i_size is 0 so we skip updating the inode's i_size
from 64K to 0.
Fix this by making sure at fill_inode_item() we always log the real
generation of the inode if it was logged in the current transaction with
the i_size we logged before. Also if an inode created in a previous
transaction is logged in exists mode only, make sure we log the i_size
stored in the inode item located from the commit root, so that if we log
multiple times that the inode exists we get the correct i_size.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
mux: mmio: fix regmap leak on probe failure
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
sqe->len is __u32 but gets stored into sr->len which is int. When
userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF),
sr->len overflows to a negative value. This negative value propagates
through the bundle recv/send path:
1. io_recv(): sel.val = sr->len (ssize_t gets -1)
2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets
0xFFFFFFFFFFFFFFFF)
3. io_ring_buffers_peek(): buf->len is not clamped because max_len
is astronomically large
4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs()
5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1,
causing ret to increase instead of decrease, creating an
infinite loop that reads past the allocated iov[] array
This results in a slab-out-of-bounds read in io_bundle_nbufs() from
the kmalloc-64 slab, as nbufs increments past the allocated iovec
entries.
BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160
Read of size 8 at addr ffff888100ae05c8 by task exp/145
Call Trace:
io_bundle_nbufs+0x128/0x160
io_recv_finish+0x117/0xe20
io_recv+0x2db/0x1160
Fix this by rejecting negative sr->len values early in both
io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32,
any value > INT_MAX indicates overflow and is not a valid length. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Fix missing SPDIFI1 index handling
SPDIF1 DAIO type isn't properly handled in daio_device_index() for
hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds
array access. Follow the hw20k1 pattern and return the proper index
for this type, too. |
