| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mesop is a Python-based UI framework that allows users to build web applications. A class pollution vulnerability in Mesop prior to version 0.14.1 allows attackers to overwrite global variables and class attributes in certain Mesop modules during runtime. This vulnerability could directly lead to a denial of service (DoS) attack against the server. Additionally, it could also result in other severe consequences given the application's implementation, such as identity confusion, where an attacker could impersonate an assistant or system role within conversations. This impersonation could potentially enable jailbreak attacks when interacting with large language models (LLMs). Just like the Javascript's prototype pollution, this vulnerability could leave a way for attackers to manipulate the intended data-flow or control-flow of the application at runtime and lead to severe consequences like remote code execution when gadgets are available. Users should upgrade to version 0.14.1 to obtain a fix for the issue. |
| Improper sanitization of the value of the 'href' and 'xlink:href' attributes in '<image>' SVG elements in AngularJS's 'ngSanitize' module allows attackers to bypass common image source restrictions. This can lead to a form of Content Spoofing https://owasp.org/www-community/attacks/Content_Spoofing and also negatively affect the application's performance and behavior by using too large or slow-to-load images.
This issue affects AngularJS versions greater than or equal to 1.3.1.
Note:
The AngularJS project is End-of-Life and will not receive any updates to address this issue. For more information see here https://docs.angularjs.org/misc/version-support-status . |
| A vulnerability has been found in ywxbear PHP-Bookstore-Website-Example and PHP Basic BookStore Website up to 0e0b9f542f7a2d90a8d7f8c83caca69294e234e4. This issue affects some unknown processing of the file /index.php of the component Quantity Handler. Such manipulation leads to improper validation of specified quantity in input. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. |
| A vulnerability, which was classified as problematic, was found in Internet Web Solutions Sublime CRM up to 20250207. Affected is an unknown function of the file /crm/inicio.php of the component HTTP POST Request Handler. The manipulation of the argument msg_to leads to cross site scripting. It is possible to launch the attack remotely. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way. |
| Cross site request forgery in Kiteworks OwnCloud allows an unauthenticated attacker to forge requests.
If a request has no Authorization header, it is created with an empty string as value by a rewrite rule. The CSRF check is done by comparing the header value to null, meaning that the existing CSRF check is bypassed in this case. An attacker can, for example, create a new administrator account if the request is executed in the browser of an authenticated victim. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: pci_endpoint_test: Fix array underflow in pci_endpoint_test_ioctl()
Commit eefb83790a0d ("misc: pci_endpoint_test: Add doorbell test case")
added NO_BAR (-1) to the pci_barno enum which, in practical terms,
changes the enum from an unsigned int to a signed int. If the user
passes a negative number in pci_endpoint_test_ioctl() then it results in
an array underflow in pci_endpoint_test_bar(). |
| A vulnerability classified as critical has been found in feng_ha_ha/megagao ssm-erp and production_ssm 1.0. This affects the function uploadPicture of the file PictureServiceImpl.java. The manipulation of the argument File leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product is distributed under two entirely different names. |
| A vulnerability, which was classified as problematic, has been found in SIAM Industria de Automação e Monitoramento SIAM 2.0. This issue affects some unknown processing of the file /qrcode.jsp. The manipulation of the argument url leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Incorrect access control in Ullu (Android version v2.9.929 and IOS version v2.8.0) allows attackers to bypass parental pin feature via unspecified vectors. |
| Laravel Rest Api is an API generator. Prior to version 2.13.0, a validation bypass vulnerability was discovered where multiple validations defined for the same attribute could be silently overridden. Due to how the framework merged validation rules across multiple contexts (such as index, store, and update actions), malicious actors could exploit this behavior by crafting requests that bypass expected validation rules, potentially injecting unexpected or dangerous parameters into the application. This could lead to unauthorized data being accepted or processed by the API, depending on the context in which the validation was bypassed. This issue has been patched in version 2.13.0. |
| Delta Electronics DIAView has an authentication bypass vulnerability. |
| Missing Authorization vulnerability in Wealcoder Animation Addons for Elementor animation-addons-for-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Animation Addons for Elementor: from n/a through <= 2.4.5. |
| A vulnerability classified as problematic was found in Pix Software Vivaz 6.0.10. This vulnerability affects unknown code. The manipulation leads to cross-site request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
The ADSP firmware on X1E has separate firmware binaries for the main
firmware and the DTB. The same applies for the "lite" firmware loaded by
the boot firmware.
When preparing to load the new ADSP firmware we shutdown the lite_pas_id
for the main firmware, but we don't shutdown the corresponding lite pas_id
for the DTB. The fact that we're leaving it "running" forever becomes
obvious if you try to reuse (or just access) the memory region used by the
"lite" firmware: The &adsp_boot_mem is accessible, but accessing the
&adsp_boot_dtb_mem results in a crash.
We don't support reusing the memory regions currently, but nevertheless we
should not keep part of the lite firmware running. Fix this by adding the
lite_dtb_pas_id and shutting it down as well.
We don't have a way to detect if the lite firmware is actually running yet,
so ignore the return status of qcom_scm_pas_shutdown() for now. This was
already the case before, the assignment to "ret" is not used anywhere. |
| immich is a high performance self-hosted photo and video management solution. Prior to 1.132.0, immich is vulnerable to account hijacking through oauth2, because the state parameter is not being checked. The oauth2 state parameter is similar to a csrf token, so when the user starts the login flow this unpredictable token is generated and somehow saved in the browser session and passed to the identity provider, which will return the state parameter when redirecting the user back to immich. Before the user is logged in that parameter needs to be verified to make sure the login was actively initiated by the user in this browser session. On it's own, this wouldn't be too bad, but when immich uses the /user-settings page as a redirect_uri, it will automatically link the accounts if the user was already logged in. This means that if someone has an immich instance with a public oauth provider (like google), an attacker can - for example - embed a hidden iframe in a webpage or even just send the victim a forged oauth login url with a code that logs the victim into the attackers oauth account and redirects back to immich and links the accounts. After this, the attacker can log into the victims account using their own oauth credentials. This vulnerability is fixed in 1.132.0. |
| A vulnerability classified as problematic has been found in Seventh D-Guard up to 20250206. This affects an unknown part of the component HTTP GET Request Handler. The manipulation leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations and a broken epilogue in the exception handlers. This will
prevent crashes and ensure correct return values of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix Use-after-free in validation
Nodes stored in the validation duplicates hashtable come from an arena
allocator that is cleared at the end of vmw_execbuf_process. All nodes
are expected to be cleared in vmw_validation_drop_ht but this node escaped
because its resource was destroyed prematurely. |
| A vulnerability has been found in Redmine 6.0.0/6.0.1/6.0.2/6.0.3 and classified as problematic. This vulnerability affects unknown code of the component Custom Query Handler. The manipulation of the argument Name leads to cross site scripting. The attack can be initiated remotely. Upgrading to version 6.0.4 is able to address this issue. It is recommended to upgrade the affected component. |
| A vulnerability was found in defog-ai introspect up to 0.1.4. It has been rated as critical. Affected by this issue is the function test_custom_tool of the file introspect/backend/integration_routes.py of the component Test Endpoint. The manipulation of the argument input_model leads to code injection. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. |
