| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: Fix system crash due to lack of free space in LFS
When f2fs tries to checkpoint during foreground gc in LFS mode, system
crash occurs due to lack of free space if the amount of dirty node and
dentry pages generated by data migration exceeds free space.
The reproduction sequence is as follows.
- 20GiB capacity block device (null_blk)
- format and mount with LFS mode
- create a file and write 20,000MiB
- 4k random write on full range of the file
RIP: 0010:new_curseg+0x48a/0x510 [f2fs]
Code: 55 e7 f5 89 c0 48 0f af c3 48 8b 5d c0 48 c1 e8 20 83 c0 01 89 43 6c 48 83 c4 28 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc <0f> 0b f0 41 80 4f 48 04 45 85 f6 0f 84 ba fd ff ff e9 ef fe ff ff
RSP: 0018:ffff977bc397b218 EFLAGS: 00010246
RAX: 00000000000027b9 RBX: 0000000000000000 RCX: 00000000000027c0
RDX: 0000000000000000 RSI: 00000000000027b9 RDI: ffff8c25ab4e74f8
RBP: ffff977bc397b268 R08: 00000000000027b9 R09: ffff8c29e4a34b40
R10: 0000000000000001 R11: ffff977bc397b0d8 R12: 0000000000000000
R13: ffff8c25b4dd81a0 R14: 0000000000000000 R15: ffff8c2f667f9000
FS: 0000000000000000(0000) GS:ffff8c344ec80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00055d000 CR3: 0000000e30810003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
allocate_segment_by_default+0x9c/0x110 [f2fs]
f2fs_allocate_data_block+0x243/0xa30 [f2fs]
? __mod_lruvec_page_state+0xa0/0x150
do_write_page+0x80/0x160 [f2fs]
f2fs_do_write_node_page+0x32/0x50 [f2fs]
__write_node_page+0x339/0x730 [f2fs]
f2fs_sync_node_pages+0x5a6/0x780 [f2fs]
block_operations+0x257/0x340 [f2fs]
f2fs_write_checkpoint+0x102/0x1050 [f2fs]
f2fs_gc+0x27c/0x630 [f2fs]
? folio_mark_dirty+0x36/0x70
f2fs_balance_fs+0x16f/0x180 [f2fs]
This patch adds checking whether free sections are enough before checkpoint
during gc.
[Jaegeuk Kim: code clean-up] |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: prevent deadlock by moving j1939_sk_errqueue()
This commit addresses a deadlock situation that can occur in certain
scenarios, such as when running data TP/ETP transfer and subscribing to
the error queue while receiving a net down event. The deadlock involves
locks in the following order:
3
j1939_session_list_lock -> active_session_list_lock
j1939_session_activate
...
j1939_sk_queue_activate_next -> sk_session_queue_lock
...
j1939_xtp_rx_eoma_one
2
j1939_sk_queue_drop_all -> sk_session_queue_lock
...
j1939_sk_netdev_event_netdown -> j1939_socks_lock
j1939_netdev_notify
1
j1939_sk_errqueue -> j1939_socks_lock
__j1939_session_cancel -> active_session_list_lock
j1939_tp_rxtimer
CPU0 CPU1
---- ----
lock(&priv->active_session_list_lock);
lock(&jsk->sk_session_queue_lock);
lock(&priv->active_session_list_lock);
lock(&priv->j1939_socks_lock);
The solution implemented in this commit is to move the
j1939_sk_errqueue() call out of the active_session_list_lock context,
thus preventing the deadlock situation. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: turn quotas off if mount failed after enabling quotas
Yi found during a review of the patch "ext4: don't BUG on inconsistent
journal feature" that when ext4_mark_recovery_complete() returns an error
value, the error handling path does not turn off the enabled quotas,
which triggers the following kmemleak:
================================================================
unreferenced object 0xffff8cf68678e7c0 (size 64):
comm "mount", pid 746, jiffies 4294871231 (age 11.540s)
hex dump (first 32 bytes):
00 90 ef 82 f6 8c ff ff 00 00 00 00 41 01 00 00 ............A...
c7 00 00 00 bd 00 00 00 0a 00 00 00 48 00 00 00 ............H...
backtrace:
[<00000000c561ef24>] __kmem_cache_alloc_node+0x4d4/0x880
[<00000000d4e621d7>] kmalloc_trace+0x39/0x140
[<00000000837eee74>] v2_read_file_info+0x18a/0x3a0
[<0000000088f6c877>] dquot_load_quota_sb+0x2ed/0x770
[<00000000340a4782>] dquot_load_quota_inode+0xc6/0x1c0
[<0000000089a18bd5>] ext4_enable_quotas+0x17e/0x3a0 [ext4]
[<000000003a0268fa>] __ext4_fill_super+0x3448/0x3910 [ext4]
[<00000000b0f2a8a8>] ext4_fill_super+0x13d/0x340 [ext4]
[<000000004a9489c4>] get_tree_bdev+0x1dc/0x370
[<000000006e723bf1>] ext4_get_tree+0x1d/0x30 [ext4]
[<00000000c7cb663d>] vfs_get_tree+0x31/0x160
[<00000000320e1bed>] do_new_mount+0x1d5/0x480
[<00000000c074654c>] path_mount+0x22e/0xbe0
[<0000000003e97a8e>] do_mount+0x95/0xc0
[<000000002f3d3736>] __x64_sys_mount+0xc4/0x160
[<0000000027d2140c>] do_syscall_64+0x3f/0x90
================================================================
To solve this problem, we add a "failed_mount10" tag, and call
ext4_quota_off_umount() in this tag to release the enabled qoutas. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix target_cmd_counter leak
The target_cmd_counter struct allocated via target_alloc_cmd_counter() is
never freed, resulting in leaks across various transport types, e.g.:
unreferenced object 0xffff88801f920120 (size 96):
comm "sh", pid 102, jiffies 4294892535 (age 713.412s)
hex dump (first 32 bytes):
07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8.......
backtrace:
[<00000000e58a6252>] kmalloc_trace+0x11/0x20
[<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod]
[<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod]
[<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop]
[<000000006a80e021>] configfs_write_iter+0xb1/0x120
[<00000000e9f4d860>] vfs_write+0x2e4/0x3c0
[<000000008143433b>] ksys_write+0x80/0xb0
[<00000000a7df29b2>] do_syscall_64+0x42/0x90
[<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Free the structure alongside the corresponding iscsit_conn / se_sess
parent. |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail()
Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
<TASK>
bpf_prog_4add87e5301a4105+0x1a/0x1c
__bpf_prog_run include/linux/filter.h:600 [inline]
bpf_prog_run_xdp include/linux/filter.h:775 [inline]
bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
netif_receive_generic_xdp net/core/dev.c:4807 [inline]
do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).
Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't free qgroup space unless specified
Boris noticed in his simple quotas testing that he was getting a leak
with Sweet Tea's change to subvol create that stopped doing a
transaction commit. This was just a side effect of that change.
In the delayed inode code we have an optimization that will free extra
reservations if we think we can pack a dir item into an already modified
leaf. Previously this wouldn't be triggered in the subvolume create
case because we'd commit the transaction, it was still possible but
much harder to trigger. It could actually be triggered if we did a
mkdir && subvol create with qgroups enabled.
This occurs because in btrfs_insert_delayed_dir_index(), which gets
called when we're adding the dir item, we do the following:
btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL);
if we're able to skip reserving space.
The problem here is that trans->block_rsv points at the temporary block
rsv for the subvolume create, which has qgroup reservations in the block
rsv.
This is a problem because btrfs_block_rsv_release() will do the
following:
if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) {
qgroup_to_release = block_rsv->qgroup_rsv_reserved -
block_rsv->qgroup_rsv_size;
block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size;
}
The temporary block rsv just has ->qgroup_rsv_reserved set,
->qgroup_rsv_size == 0. The optimization in
btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then
later on when we call btrfs_subvolume_release_metadata() which has
btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release);
btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release);
qgroup_to_release is set to 0, and we do not convert the reserved
metadata space.
The problem here is that the block rsv code has been unconditionally
messing with ->qgroup_rsv_reserved, because the main place this is used
is delalloc, and any time we call btrfs_block_rsv_release() we do it
with qgroup_to_release set, and thus do the proper accounting.
The subvolume code is the only other code that uses the qgroup
reservation stuff, but it's intermingled with the above optimization,
and thus was getting its reservation freed out from underneath it and
thus leaking the reserved space.
The solution is to simply not mess with the qgroup reservations if we
don't have qgroup_to_release set. This works with the existing code as
anything that messes with the delalloc reservations always have
qgroup_to_release set. This fixes the leak that Boris was observing. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Handle error code returned by ima_filter_rule_match()
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Fix timeout handling
When the CPU that the QSPI interrupt handler runs on (typically CPU 0)
is excessively busy, it can lead to rare cases of the IRQ thread not
running before the transfer timeout is reached.
While handling the timeouts, any pending transfers are cleaned up and
the message that they correspond to is marked as failed, which leaves
the curr_xfer field pointing at stale memory.
To avoid this, clear curr_xfer to NULL upon timeout and check for this
condition when the IRQ thread is finally run.
While at it, also make sure to clear interrupts on failure so that new
interrupts can be run.
A better, more involved, fix would move the interrupt clearing into a
hard IRQ handler. Ideally we would also want to signal that the IRQ
thread no longer needs to be run after the timeout is hit to avoid the
extra check for a valid transfer. |
| A security flaw has been discovered in D-Link DWR-M920 up to 1.1.50. Impacted is the function sub_42261C of the file /boafrm/formFilter. The manipulation of the argument ip6addr results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. |
| A security vulnerability has been detected in PbootCMS up to 3.2.12. The affected element is the function get_user_ip of the file core/function/handle.php of the component Header Handler. The manipulation of the argument X-Forwarded-For leads to use of less trusted source. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A weakness has been identified in D-Link DWR-M920 up to 1.1.50. The affected element is the function sub_4155B4 of the file /boafrm/formLtefotaUpgradeFibocom. This manipulation of the argument fota_url causes command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. |
| The Frontend Post Submission Manager Lite β Frontend Posting WordPress Plugin plugin for WordPress is vulnerable to unauthorized loss of data due to an incorrect authorization check on the 'media_delete_action' function in all versions up to, and including, 1.2.6. This makes it possible for unauthenticated attackers to delete arbitrary attachments. |
| A vulnerability was identified in itsourcecode Online Frozen Foods Ordering System 1.0. This vulnerability affects unknown code of the file /customer_details.php. Such manipulation leads to sql injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| A security vulnerability has been detected in itsourcecode Student Management System 1.0. The affected element is an unknown function of the file /form137.php. The manipulation of the argument ID leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in itsourcecode Student Management System 1.0. The impacted element is an unknown function of the file /list_report.php. The manipulation of the argument sy results in sql injection. The attack may be launched remotely. The exploit is now public and may be used. |
| A vulnerability has been found in JD Cloud BE6500 4.4.1.r4308. This issue affects the function sub_4780 of the file /jdcapi. Such manipulation of the argument ddns_name leads to command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in TOZED ZLT M30s up to 1.47. Impacted is an unknown function of the file /reqproc/proc_post of the component Web Management Interface. Performing manipulation of the argument goformId results in information disclosure. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in TOZED ZLT M30s up to 1.47. The affected element is an unknown function of the component UART Interface. Executing manipulation can lead to on-chip debug and test interface with improper access control. The physical device can be targeted for the attack. Attacks of this nature are highly complex. The exploitability is described as difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Tenda WH450 1.0.0.18. This affects an unknown part of the file /goform/SafeMacFilter. The manipulation of the argument page results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited. |
| A vulnerability was determined in UTT θΏε 512W up to 1.7.7-171114. This issue affects the function strcpy of the file /goform/formPictureUrl. This manipulation of the argument importpictureurl causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. |
