| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there. |
| changedetection.io's /settings save handler builds an update dict from form.data['application'] and blind-merges it into the stored application settings via .update(). Because WTForms represents an unchecked checkbox as False rather than 'unchanged', and only the 'password' field is special-cased against this problem, a POST to /settings that omits the api_access_token_enabled field (e.g. a minimal scripted request) silently disables API key enforcement for the entire REST API, exposing the full watch list, history, and configuration to unauthenticated requests. |
| A flaw was found in GStreamer's RealMedia demuxer in the gst-plugins-ugly package. When processing a RealMedia file containing a specially crafted FILEINFO metadata section, the demuxer parses variable-name and variable-value pairs using re_skip_pascal_string() without validating that offsets remain within the mapped buffer. Additionally, the element count controlling the parsing loop is read from attacker-controlled data without validation, which can cause an infinite loop. A crafted RealMedia file can cause the application to crash, hang, or potentially read limited adjacent memory contents. |
| A vulnerability was found in the GStreamer RealMedia demuxer (gst-plugins-ugly). When processing a RealMedia (.rm) file, the demuxer parses MDPR (media properties) chunks to configure audio streams. For audio stream header versions 4 and 5, the parser reads fields such as codec type, packet size, sample rate, channel count, and extra codec data length from fixed offsets within the chunk without first checking that the chunk contains enough data. If a malicious file provides an MDPR chunk that is too small to contain a complete audio stream header, the parser reads beyond the end of the buffer. This can cause the application to crash. In some cases, bytes read past the buffer boundary may be incorporated into stream metadata, which could result in limited information disclosure. |
| Cross-Site request forgery (CSRF) vulnerability in Melapress WP Activity Log and Melapress WP Activity Log Premium allows Cross Site Request Forgery.
This issue affects WP Activity Log: through 5.6.4; WP Activity Log Premium: through 5.6.4. |
| Leantime through 3.6.2 exposes the JSON-RPC methods leantime.rpc.TwoFA.TwoFA.getSetupData, saveSecret, verifyAndEnable, and disable2FA, which act on a caller-supplied userId parameter with no ownership check, session pinning, or permission-attribute gate (unlike other RPC-exposed methods in the same dispatcher). Any authenticated user can invoke getSetupData with an arbitrary userId to read that user's live TOTP secret, or disable2FA to strip another account's two-factor authentication entirely, fully defeating account-level 2FA protection. This is related to CVE-2026-15509, which covers a similar missing-authorization pattern in the JSON-RPC editUser/addUser role-assignment path in the same application; the TwoFA service methods addressed here are a distinct, independently fixable set of RPC endpoints. |
| An authenticated attacker could exceed the session flow control incoming window potentially leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate compound request size before reading StructureSize2
When ksmbd validates a compound (chained) SMB2 request,
ksmbd_smb2_check_message() reads pdu->StructureSize2 without first
checking that the compound element is large enough to contain it.
StructureSize2 is a 2-byte field at offset 64
(__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element.
The compound-walking logic only guarantees that a full 64-byte SMB2
header is present for the trailing element: when NextCommand is 0, len is
reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A
remote client can craft a compound request whose last element has exactly
64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte
past the receive buffer, producing a slab-out-of-bounds read.
BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14
The buggy address is located 172 bytes inside of allocated 173-byte region
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
handle_ksmbd_work (fs/smb/server/server.c:119)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Reject any compound element that is too small to hold StructureSize2
before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject free space cache with more entries than pages
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue. |
| The Custom Fields WordPress plugin before 1.5.1 does not validate a user-supplied file path before deletion, allowing unauthenticated users to delete arbitrary files on the server (such as wp-config.php), which can lead to a full site takeover. |
| The DHL Shipping Germany for WooCommerce WordPress plugin before 4.0.1 does not perform any authorization check (no capability, nonce, login, or ownership check) on one of its shipping-label download endpoints, so an unauthenticated attacker can enumerate sequential ids and download every stored shipping label, each containing the customer's full name, complete postal address, and order reference. |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue. |
| In OpenStack Swift through 2.38.0, the proxy server Accept header parser contains a regular expression vulnerable to catastrophic backtracking (ReDoS). The "qdtext" pattern (?:[^"]|\\.)* allows an unauthenticated remote attacker to send a crafted Accept header that causes exponential CPU consumption in the proxy worker. A payload of 32 backslash-character pairs exceeds 30 seconds of CPU time. No authentication is required. Repeated requests can exhaust all proxy worker threads, resulting in a complete denial of service. |
| A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue. |
| In OpenStack Swift through 2.38.0, S3API middleware does not enforce that semantic x-amz-* headers are covered by the SigV4 signature on presigned URL requests. An attacker who obtains a presigned PUT URL can inject an unsigned X-Amz-Copy-Source header, causing Swift to perform a server-side copy from an arbitrary source object using the signer's authorization context. The attacker can read any object the signer has access to, provided the target project_id, container name, and object name are known. This affects all deployments using the default s3_acl=false configuration. |
