| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/queue: Call fini on exec queue creation fail
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
(cherry picked from commit 393e5fea6f7d7054abc2c3d97a4cfe8306cd6079) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/efi: defer freeing of boot services memory
efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE
and EFI_BOOT_SERVICES_DATA using memblock_free_late().
There are two issue with that: memblock_free_late() should be used for
memory allocated with memblock_alloc() while the memory reserved with
memblock_reserve() should be freed with free_reserved_area().
More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
efi_free_boot_services() is called before deferred initialization of the
memory map is complete.
Benjamin Herrenschmidt reports that this causes a leak of ~140MB of
RAM on EC2 t3a.nano instances which only have 512MB or RAM.
If the freed memory resides in the areas that memory map for them is
still uninitialized, they won't be actually freed because
memblock_free_late() calls memblock_free_pages() and the latter skips
uninitialized pages.
Using free_reserved_area() at this point is also problematic because
__free_page() accesses the buddy of the freed page and that again might
end up in uninitialized part of the memory map.
Delaying the entire efi_free_boot_services() could be problematic
because in addition to freeing boot services memory it updates
efi.memmap without any synchronization and that's undesirable late in
boot when there is concurrency.
More robust approach is to only defer freeing of the EFI boot services
memory.
Split efi_free_boot_services() in two. First efi_unmap_boot_services()
collects ranges that should be freed into an array then
efi_free_boot_services() later frees them after deferred init is complete. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash in ethtool offline loopback test
Since the conversion of ice to page pool, the ethtool loopback test
crashes:
BUG: kernel NULL pointer dereference, address: 000000000000000c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1100f1067 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 23 UID: 0 PID: 5904 Comm: ethtool Kdump: loaded Not tainted 6.19.0-0.rc7.260128g1f97d9dcf5364.49.eln154.x86_64 #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:ice_alloc_rx_bufs+0x1cd/0x310 [ice]
Code: 83 6c 24 30 01 66 41 89 47 08 0f 84 c0 00 00 00 41 0f b7 dc 48 8b 44 24 18 48 c1 e3 04 41 bb 00 10 00 00 48 8d 2c 18 8b 04 24 <89> 45 0c 41 8b 4d 00 49 d3 e3 44 3b 5c 24 24 0f 83 ac fe ff ff 44
RSP: 0018:ff7894738aa1f768 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000700 RDI: 0000000000000000
RBP: 0000000000000000 R08: ff16dcae79880200 R09: 0000000000000019
R10: 0000000000000001 R11: 0000000000001000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff16dcae6c670000
FS: 00007fcf428850c0(0000) GS:ff16dcb149710000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000000c CR3: 0000000121227005 CR4: 0000000000773ef0
PKRU: 55555554
Call Trace:
<TASK>
ice_vsi_cfg_rxq+0xca/0x460 [ice]
ice_vsi_cfg_rxqs+0x54/0x70 [ice]
ice_loopback_test+0xa9/0x520 [ice]
ice_self_test+0x1b9/0x280 [ice]
ethtool_self_test+0xe5/0x200
__dev_ethtool+0x1106/0x1a90
dev_ethtool+0xbe/0x1a0
dev_ioctl+0x258/0x4c0
sock_do_ioctl+0xe3/0x130
__x64_sys_ioctl+0xb9/0x100
do_syscall_64+0x7c/0x700
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
It crashes because we have not initialized libeth for the rx ring.
Fix it by treating ICE_VSI_LB VSIs slightly more like normal PF VSIs and
letting them have a q_vector. It's just a dummy, because the loopback
test does not use interrupts, but it contains a napi struct that can be
passed to libeth_rx_fq_create() called from ice_vsi_cfg_rxq() ->
ice_rxq_pp_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata: cancel pending work after clearing deferred_qc
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.) |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcp251x: fix deadlock in error path of mcp251x_open
The mcp251x_open() function call free_irq() in its error path with the
mpc_lock mutex held. But if an interrupt already occurred the
interrupt handler will be waiting for the mpc_lock and free_irq() will
deadlock waiting for the handler to finish.
This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can:
mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but
for the error path.
To solve this issue move the call to free_irq() after the lock is
released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ
handler will exit right away once it acquired the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix error handling in slot reset
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
(cherry picked from commit bb71362182e59caa227e4192da5a612b09349696) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix locking for bcm_op runtime updates
Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: register phy led_triggers during probe to avoid AB-BA deadlock
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting
Running stress-ng --schedpolicy 0 on an RT kernel on a big machine
might lead to the following WARNINGs (edited).
sched: DL de-boosted task PID 22725: REPLENISH flag missing
WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8
... (running_bw underflow)
Call trace:
dequeue_task_dl+0x15c/0x1f8 (P)
dequeue_task+0x80/0x168
deactivate_task+0x24/0x50
push_dl_task+0x264/0x2e0
dl_task_timer+0x1b0/0x228
__hrtimer_run_queues+0x188/0x378
hrtimer_interrupt+0xfc/0x260
...
The problem is that when a SCHED_DEADLINE task (lock holder) is
changed to a lower priority class via sched_setscheduler(), it may
fail to properly inherit the parameters of potential DEADLINE donors
if it didn't already inherit them in the past (shorter deadline than
donor's at that time). This might lead to bandwidth accounting
corruption, as enqueue_task_dl() won't recognize the lock holder as
boosted.
The scenario occurs when:
1. A DEADLINE task (donor) blocks on a PI mutex held by another
DEADLINE task (holder), but the holder doesn't inherit parameters
(e.g., it already has a shorter deadline)
2. sched_setscheduler() changes the holder from DEADLINE to a lower
class while still holding the mutex
3. The holder should now inherit DEADLINE parameters from the donor
and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen
Fix the issue by introducing __setscheduler_dl_pi(), which detects when
a DEADLINE (proper or boosted) task gets setscheduled to a lower
priority class. In case, the function makes the task inherit DEADLINE
parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to
ensure proper bandwidth accounting during the next enqueue operation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: thp: deny THP for files on anonymous inodes
file_thp_enabled() incorrectly allows THP for files on anonymous inodes
(e.g. guest_memfd and secretmem). These files are created via
alloc_file_pseudo(), which does not call get_write_access() and leaves
inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being
true, they appear as read-only regular files when
CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP
collapse.
Anonymous inodes can never pass the inode_is_open_for_write() check
since their i_writecount is never incremented through the normal VFS
open path. The right thing to do is to exclude them from THP eligibility
altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real
filesystem files (e.g. shared libraries), not for pseudo-filesystem
inodes.
For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create
large folios in the page cache via the collapse path, but the
guest_memfd fault handler does not support large folios. This triggers
WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping().
For secretmem, collapse_file() tries to copy page contents through the
direct map, but secretmem pages are removed from the direct map. This
can result in a kernel crash:
BUG: unable to handle page fault for address: ffff88810284d000
RIP: 0010:memcpy_orig+0x16/0x130
Call Trace:
collapse_file
hpage_collapse_scan_file
madvise_collapse
Secretmem is not affected by the crash on upstream as the memory failure
recovery handles the failed copy gracefully, but it still triggers
confusing false memory failure reports:
Memory failure: 0x106d96f: recovery action for clean unevictable
LRU page: Recovered
Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all
anonymous inode files. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fcloop: Check remoteport port_state before calling done callback
In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when
remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the
nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to
fail and the nvme-fc transport layer itself will directly call
nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free
the lsrsp resources.
Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state.
If online, then lsrsp->done callback will free the lsrsp. Else, return
-ENODEV to signal the nvme-fc transport to handle freeing lsrsp. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix WARN_ON in tracing_buffers_mmap_close
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback. |
