| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: chacha20poly1305 - validate poly1305 template argument
chachapoly_create() still accepts the compatibility poly1305 parameter
in the template name, but it assumes the second template argument is
always present and immediately passes it to strcmp().
When the argument is missing, crypto_attr_alg_name() returns an error
pointer. Check for that before comparing the name so malformed template
instantiations fail with an error instead of dereferencing the error
pointer in strcmp().
This matches the surrounding Crypto API template pattern where
crypto_attr_alg_name() results are validated before string-specific use. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page
nvmet_execute_disc_get_log_page() validates only the dword alignment
of the host-supplied Log Page Offset (lpo). The 64-bit offset is then
added to a small kzalloc'd buffer that holds the discovery log page
and the result is passed straight to nvmet_copy_to_sgl(), which
memcpy()s data_len bytes out to the host with no source-side bound
check:
u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */
size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */
...
if (offset & 0x3) { ... } /* only check */
...
alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req);
buffer = kzalloc(alloc_len, GFP_KERNEL);
...
status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len);
The Discovery controller is unauthenticated -- nvmet_host_allowed()
returns true unconditionally for the discovery subsystem -- so the call
is reachable pre-authentication by any TCP/RDMA/FC peer that can reach
the nvmet target. With a discovery log page of ~1 KiB, an attacker
requesting up to 4 KiB starting at offset == alloc_len reads the next
slab page out and gets its content returned over the fabric (an
empirical run on a default nvmet-tcp loopback target leaked 81
canonical kernel pointers in one Get Log Page response). Pointing the
offset at unmapped kernel memory faults the in-kernel memcpy and
crashes (or panics, on panic_on_oops=1) the target host instead.
The attacker-controlled source-side offset pattern
"nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique
to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every
other Get Log Page handler in admin-cmd.c either ignores lpo (and
silently starts every response at offset 0) or tracks a local
destination offset with a fixed source pointer.
Validate the host-supplied offset against the log page size, cap the
copy length to what is actually available, and zero-fill any remainder
of the host transfer buffer. The zero-fill matches the existing
short-response pattern in nvmet_execute_get_log_changed_ns()
(admin-cmd.c) and prevents leaking transport SGL contents when the
host asks for more bytes than the log page contains. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Validate SVID index in svdm_consume_modes()
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix hard lockup on disconnect
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver. |
| The Smart Manager WordPress plugin before 8.92.0 does not properly encode a post field before rendering it into an HTML attribute in its management grid, allowing users with the Contributor role or above to inject JavaScript that executes in the browser session of an administrator who views the grid. |
| The Sina Extension for Elementor WordPress plugin before 3.10.2 does not escape a value reconstructed from request input in one of its unauthenticated AJAX handlers before reflecting it into the HTML response, allowing unauthenticated attackers to execute arbitrary JavaScript in the browser of anyone who triggers a crafted request. |
| The WPBot WordPress plugin before 8.5.2 does not validate administrator-configured field identifiers before using them in a SQL query, allowing users with administrator access to perform SQL injection that executes when a visitor triggers a search. |
| The MPG WordPress plugin before 4.1.8 does not sanitise and escape a parameter before reflecting it back in the response, allowing unauthenticated attackers to perform Reflected Cross-Site Scripting against a victim who is induced to send a crafted request. |
| The Realtyna Organic IDX plugin + WPL Real Estate WordPress plugin before 5.3.0 does not validate the type of uploaded files, and its file upload functionality is gated only by an API that is enabled by default and authenticated with hardcoded credentials shipped identically across all installations. This makes it possible for unauthenticated attackers to upload arbitrary PHP files and achieve remote code execution. |
| The 微信二维码登陆 WordPress plugin through 1.3 does not properly validate WeChat webhook requests, as its signature check always passes, and it discloses the generated login code in the webhook response. This allows an unauthenticated attacker to forge a login event for any existing username, read the login code, and redeem it through an unauthenticated AJAX action to log in as that user, including an administrator, without a password. |
| Simply Schedule Appointments is vulnerable to unauthenticated Stored Cross-Site Scripting in all versions up to and including 1.6.12.2. The root cause is a sanitization-ordering defect: the rendered notification content is decoded back into live HTML after it has already passed through the Simply Schedule Appointments WordPress plugin before 1.6.12.4's wp_kses_post() filter, so a double-encoded payload survives intake and is reintroduced as an executable element at render time. |
| The Events Calendar WordPress plugin before 6.16.5.1 does not perform an authorization check on one of its Event Aggregator import REST API routes and skips an integrity check for a particular status value, allowing unauthenticated attackers to mark existing import records as failed and to store arbitrary content in a hidden comment record. |
| The Masteriyo LMS WordPress plugin before 2.3.1 does not correctly verify authorization on an unauthenticated AJAX action used to clear user sessions, allowing unauthenticated attackers to terminate the active sessions (force-logout) of any user on the site, including administrators. |
| The Custom Fields Account Registration For Woocommerce WordPress plugin before 1.4 does not prevent its custom registration fields from writing to the user capabilities meta key on sites that use a non-default database table prefix, so an unauthenticated user who registers an account can be granted the administrator role when a correspondingly named field has been configured. |
| The Document Gallery WordPress plugin before 5.1.1 does not properly sanitise and escape user input before reflecting it back in the response of an unauthenticated AJAX action, leading to a Reflected Cross-Site Scripting vulnerability which can be exploited against unauthenticated users. |
| The Clover Payment Gateway by Zaytech for WooCommerce WordPress plugin before 1.3.6 does not verify that an approved external payment record actually belongs to the WooCommerce order being completed, nor that the paid amount matches the order total, allowing unauthenticated users to mark arbitrary orders as paid by replaying a single genuinely-approved payment reference (for example one obtained from their own minimal purchase). |
| The MemberGlut WordPress plugin before 1.1.5 does not validate the role chosen during front-end registration, allowing unauthenticated users to register an account with an arbitrary role, including administrator, leading to full site compromise. |
| The MainWP Child WordPress plugin before 6.1.2 does not verify the requester's identity in its site-registration request handler when password authentication has been disabled for the targeted account, allowing an unauthenticated attacker to obtain a valid authentication session as that account, including an administrator, by naming its login in a single registration request. |
