| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value
The return value of acpi_fetch_acpi_dev() could be NULL, which would
cause a NULL pointer dereference to occur in acpi_device_hid().
[ rjw: Subject and changelog edits, added empty line after if () ] |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table
which contains invalid physical addresses, with high bits set which fall
outside the range of the CPU-s supported physical address range.
Calling acpi_os_map_memory() on such an invalid phys address leads to
the below WARN_ON in ioremap triggering resulting in an oops/stacktrace.
Add code to verify the physical address before calling acpi_os_map_memory()
to fix / avoid the oops.
[ 1.226900] ioremap: invalid physical address 3001000000000000
[ 1.226949] ------------[ cut here ]------------
[ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f
[ 1.226996] Modules linked in:
[ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490
[ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f
[ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00
[ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286
[ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000
[ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff
[ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18
[ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008
[ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000
[ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000
[ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0
[ 1.227167] Call Trace:
[ 1.227176] <TASK>
[ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370
[ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227288] acpi_init_fpdt+0xa8/0x253
[ 1.227308] ? acpi_debugfs_init+0x1f/0x1f
[ 1.227339] do_one_initcall+0x5a/0x300
[ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80
[ 1.227442] kernel_init_freeable+0x28b/0x2cc
[ 1.227512] ? rest_init+0x170/0x170
[ 1.227538] kernel_init+0x16/0x140
[ 1.227552] ret_from_fork+0x1f/0x30
[ 1.227639] </TASK>
[ 1.227647] irq event stamp: 186819
[ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70
[ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70
[ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227715] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS
UBSAN complains about array-index-out-of-bounds:
[ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41
[ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]'
[ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu
[ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010
[ 1.980718] kernel: Call Trace:
[ 1.980721] kernel: <TASK>
[ 1.980723] kernel: show_stack+0x52/0x58
[ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f
[ 1.980734] kernel: dump_stack+0x10/0x12
[ 1.980736] kernel: ubsan_epilogue+0x9/0x45
[ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci]
[ 1.980748] kernel: ata_qc_issue+0x135/0x240
[ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580
[ 1.980754] kernel: ? vprintk_default+0x1d/0x20
[ 1.980759] kernel: ata_exec_internal+0x67/0xa0
[ 1.980762] kernel: sata_pmp_read+0x8d/0xc0
[ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90
[ 1.980768] kernel: sata_pmp_attach+0x8b/0x310
[ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0
[ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30
[ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci]
[ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci]
[ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci]
[ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0
[ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560
[ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40
[ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci]
[ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600
[ 1.980810] kernel: ata_scsi_error+0x9c/0xd0
[ 1.980813] kernel: scsi_error_handler+0xa1/0x180
[ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0
[ 1.980820] kernel: kthread+0x12a/0x150
[ 1.980823] kernel: ? set_kthread_struct+0x50/0x50
[ 1.980826] kernel: ret_from_fork+0x22/0x30
[ 1.980831] kernel: </TASK>
This happens because sata_pmp_init_links() initialize link->pmp up to
SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array.
I can't find the maximum Enclosure Management ports specified in AHCI
spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier
Information" can utilize 4 bits, which implies it can support up to 16
ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the
issue.
BugLink: https://bugs.launchpad.net/bugs/1970074 |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix potential out of bound read in ext4_fc_replay_scan()
For scan loop must ensure that at least EXT4_FC_TAG_BASE_LEN space. If remain
space less than EXT4_FC_TAG_BASE_LEN which will lead to out of bound read
when mounting corrupt file system image.
ADD_RANGE/HEAD/TAIL is needed to add extra check when do journal scan, as this
three tags will read data during scan, tag length couldn't less than data length
which will read. |
| In the Linux kernel, the following vulnerability has been resolved:
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<900000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace 8b484262b4b8c24c ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.
Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.
So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline
When converting files with inline data to extents, delayed allocations
made on a file system created with both the bigalloc and inline options
can result in invalid extent status cache content, incorrect reserved
cluster counts, kernel memory leaks, and potential kernel panics.
With bigalloc, the code that determines whether a block must be
delayed allocated searches the extent tree to see if that block maps
to a previously allocated cluster. If not, the block is delayed
allocated, and otherwise, it isn't. However, if the inline option is
also used, and if the file containing the block is marked as able to
store data inline, there isn't a valid extent tree associated with
the file. The current code in ext4_clu_mapped() calls
ext4_find_extent() to search the non-existent tree for a previously
allocated cluster anyway, which typically finds nothing, as desired.
However, a side effect of the search can be to cache invalid content
from the non-existent tree (garbage) in the extent status tree,
including bogus entries in the pending reservation tree.
To fix this, avoid searching the extent tree when allocating blocks
for bigalloc + inline files that are being converted from inline to
extent mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvbdev: adopts refcnt to avoid UAF
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/sti/sti_hda.c:637:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_hda_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sti/sti_dvo.c:376:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_dvo_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sti/sti_hdmi.c:1035:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_hdmi_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->mode_valid() in 'struct drm_connector_helper_funcs' expects a return
type of 'enum drm_mode_status', not 'int'. Adjust the return type of
sti_{dvo,hda,hdmi}_connector_mode_valid() to match the prototype's to
resolve the warning and CFI failure. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
This patch fixes a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware
version string by memcpy() in brcmf_fil_iovar_data_get().
The patch ensures buf is null-terminated.
Found by a modified version of syzkaller.
[ 47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3
[ 47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 47.601565][ T1897] ==================================================================
[ 47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0
[ 47.603447][ T1897] Read of size 1 at addr ffffc90001f6f000 by task kworker/0:2/1897
[ 47.604336][ T1897]
[ 47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G O 5.14.0+ #131
[ 47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 47.606907][ T1897] Workqueue: usb_hub_wq hub_event
[ 47.607453][ T1897] Call Trace:
[ 47.607801][ T1897] dump_stack_lvl+0x8e/0xd1
[ 47.608295][ T1897] print_address_description.constprop.0.cold+0xf/0x334
[ 47.609009][ T1897] ? strsep+0x1b2/0x1f0
[ 47.609434][ T1897] ? strsep+0x1b2/0x1f0
[ 47.609863][ T1897] kasan_report.cold+0x83/0xdf
[ 47.610366][ T1897] ? strsep+0x1b2/0x1f0
[ 47.610882][ T1897] strsep+0x1b2/0x1f0
[ 47.611300][ T1897] ? brcmf_fil_iovar_data_get+0x3a/0xf0
[ 47.611883][ T1897] brcmf_c_preinit_dcmds+0x995/0xc40
[ 47.612434][ T1897] ? brcmf_c_set_joinpref_default+0x100/0x100
[ 47.613078][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 47.613662][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 47.614208][ T1897] ? lock_acquire+0x19d/0x4e0
[ 47.614704][ T1897] ? find_held_lock+0x2d/0x110
[ 47.615236][ T1897] ? brcmf_usb_deq+0x1a7/0x260
[ 47.615741][ T1897] ? brcmf_usb_rx_fill_all+0x5a/0xf0
[ 47.616288][ T1897] brcmf_attach+0x246/0xd40
[ 47.616758][ T1897] ? wiphy_new_nm+0x1703/0x1dd0
[ 47.617280][ T1897] ? kmemdup+0x43/0x50
[ 47.617720][ T1897] brcmf_usb_probe+0x12de/0x1690
[ 47.618244][ T1897] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[ 47.618901][ T1897] usb_probe_interface+0x2aa/0x760
[ 47.619429][ T1897] ? usb_probe_device+0x250/0x250
[ 47.619950][ T1897] really_probe+0x205/0xb70
[ 47.620435][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.621048][ T1897] __driver_probe_device+0x311/0x4b0
[ 47.621595][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.622209][ T1897] driver_probe_device+0x4e/0x150
[ 47.622739][ T1897] __device_attach_driver+0x1cc/0x2a0
[ 47.623287][ T1897] bus_for_each_drv+0x156/0x1d0
[ 47.623796][ T1897] ? bus_rescan_devices+0x30/0x30
[ 47.624309][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.624907][ T1897] ? trace_hardirqs_on+0x46/0x160
[ 47.625437][ T1897] __device_attach+0x23f/0x3a0
[ 47.625924][ T1897] ? device_bind_driver+0xd0/0xd0
[ 47.626433][ T1897] ? kobject_uevent_env+0x287/0x14b0
[ 47.627057][ T1897] bus_probe_device+0x1da/0x290
[ 47.627557][ T1897] device_add+0xb7b/0x1eb0
[ 47.628027][ T1897] ? wait_for_completion+0x290/0x290
[ 47.628593][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[ 47.629249][ T1897] usb_set_configuration+0xf59/0x16f0
[ 47.629829][ T1897] usb_generic_driver_probe+0x82/0xa0
[ 47.630385][ T1897] usb_probe_device+0xbb/0x250
[ 47.630927][ T1897] ? usb_suspend+0x590/0x590
[ 47.631397][ T1897] really_probe+0x205/0xb70
[ 47.631855][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.632469][ T1897] __driver_probe_device+0x311/0x4b0
[ 47.633002][
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: make sure skb->len != 0 when redirecting to a tunneling device
syzkaller managed to trigger another case where skb->len == 0
when we enter __dev_queue_xmit:
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295
Call Trace:
dev_queue_xmit+0x17/0x20 net/core/dev.c:4406
__bpf_tx_skb net/core/filter.c:2115 [inline]
__bpf_redirect_no_mac net/core/filter.c:2140 [inline]
__bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163
____bpf_clone_redirect net/core/filter.c:2447 [inline]
bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419
bpf_prog_48159a89cb4a9a16+0x59/0x5e
bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline]
__bpf_prog_run include/linux/filter.h:596 [inline]
bpf_prog_run include/linux/filter.h:603 [inline]
bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402
bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170
bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648
__sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005
__do_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5089 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x61/0xc6
The reproducer doesn't really reproduce outside of syzkaller
environment, so I'm taking a guess here. It looks like we
do generate correct ETH_HLEN-sized packet, but we redirect
the packet to the tunneling device. Before we do so, we
__skb_pull l2 header and arrive again at skb->len == 0.
Doesn't seem like we can do anything better than having
an explicit check after __skb_pull? |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Do not free q_vector unless new one was allocated
Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix use_count leakage when handling boot-on
I found a use_count leakage towards supply regulator of rdev with
boot-on option.
┌───────────────────┐ ┌───────────────────┐
│ regulator_dev A │ │ regulator_dev B │
│ (boot-on) │ │ (boot-on) │
│ use_count=0 │◀──supply──│ use_count=1 │
│ │ │ │
└───────────────────┘ └───────────────────┘
In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).
Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.
However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix use-after-free on source server when doing inter-server copy
Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.
When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.
However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.
This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Allow waiting for commands to complete on removed device
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read. |
| In the Linux kernel, the following vulnerability has been resolved:
md-raid10: fix KASAN warning
There's a KASAN warning in raid10_remove_disk when running the lvm
test lvconvert-raid-reshape.sh. We fix this warning by verifying that the
value "number" is valid.
BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10]
Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682
CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x45/0x57a
? __lock_text_start+0x18/0x18
? raid10_remove_disk+0x61/0x2a0 [raid10]
kasan_report+0xa8/0xe0
? raid10_remove_disk+0x61/0x2a0 [raid10]
raid10_remove_disk+0x61/0x2a0 [raid10]
Buffer I/O error on dev dm-76, logical block 15344, async page read
? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0
remove_and_add_spares+0x367/0x8a0 [md_mod]
? super_written+0x1c0/0x1c0 [md_mod]
? mutex_trylock+0xac/0x120
? _raw_spin_lock+0x72/0xc0
? _raw_spin_lock_bh+0xc0/0xc0
md_check_recovery+0x848/0x960 [md_mod]
raid10d+0xcf/0x3360 [raid10]
? sched_clock_cpu+0x185/0x1a0
? rb_erase+0x4d4/0x620
? var_wake_function+0xe0/0xe0
? psi_group_change+0x411/0x500
? preempt_count_sub+0xf/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? raid10_sync_request+0x36c0/0x36c0 [raid10]
? preempt_count_sub+0xf/0xc0
? _raw_spin_unlock_irqrestore+0x19/0x40
? del_timer_sync+0xa9/0x100
? try_to_del_timer_sync+0xc0/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? _raw_spin_unlock_irq+0x11/0x24
? __list_del_entry_valid+0x68/0xa0
? finish_wait+0xa3/0x100
md_thread+0x161/0x260 [md_mod]
? unregister_md_personality+0xa0/0xa0 [md_mod]
? _raw_spin_lock_irqsave+0x78/0xc0
? prepare_to_wait_event+0x2c0/0x2c0
? unregister_md_personality+0xa0/0xa0 [md_mod]
kthread+0x148/0x180
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 124495:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x80/0xa0
setup_conf+0x140/0x5c0 [raid10]
raid10_run+0x4cd/0x740 [raid10]
md_run+0x6f9/0x1300 [md_mod]
raid_ctr+0x2531/0x4ac0 [dm_raid]
dm_table_add_target+0x2b0/0x620 [dm_mod]
table_load+0x1c8/0x400 [dm_mod]
ctl_ioctl+0x29e/0x560 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
__do_compat_sys_ioctl+0xfa/0x160
do_syscall_64+0x90/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x9e/0xc0
kvfree_call_rcu+0x84/0x480
timerfd_release+0x82/0x140
L __fput+0xfa/0x400
task_work_run+0x80/0xc0
exit_to_user_mode_prepare+0x155/0x160
syscall_exit_to_user_mode+0x12/0x40
do_syscall_64+0x42/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x9e/0xc0
kvfree_call_rcu+0x84/0x480
timerfd_release+0x82/0x140
__fput+0xfa/0x400
task_work_run+0x80/0xc0
exit_to_user_mode_prepare+0x155/0x160
syscall_exit_to_user_mode+0x12/0x40
do_syscall_64+0x42/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The buggy address belongs to the object at ffff889108f3d200
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
256-byte region [ffff889108f3d200, ffff889108f3d300)
The buggy address belongs to the physical page:
page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c
head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=2)
raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff889108f3d280: 00 00
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.084034] Hardware name: Loongson Loongson-3A4000-7A1000-1w-V0.1-CRB/Loongson-LS3A4000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<98000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<9800000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<980000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<9800000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<9800000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<98000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<98000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<98000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<98000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<9800000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<9800000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace 8b484262b4b8c24c ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Add more validity checks for inode counts
Add checks verifying number of inodes stored in the superblock matches
the number computed from number of inodes per group. Also verify we have
at least one block worth of inodes per group. This prevents crashes on
corrupted filesystems. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
In pdata_quirks_init_clocks(), the loop contains
of_find_node_by_name() but without corresponding of_node_put(). |
