| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Shenzhen Tenda Technology Co., Ltd Tenda G0 v15.11.0.5 was discovered to contain multiple buffer overflows in the Saveqqlist function via the qqStr and markStr parameters. These vulnerabilities allow attackers to cause a Denial of Service (DoS) via a crafted HTTP request. |
| Shenzhen Tenda Technology Co., Ltd Tenda W15E v15.11.0.10 was discovered to contain a buffer overflow in the webAuthUserPwd parameter of the formModifyWebAuthUser function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request. |
| Stack-based Buffer Overflow vulnerability in Erlang OTP erts (inet_drv) allows an unauthenticated remote attacker to crash the BEAM VM by sending a crafted SCTP ERROR chunk.
The sctp_parse_error_chunk function in erts/emulator/drivers/common/inet_drv.c parses SCTP ERROR chunks and writes cause codes into a fixed-size stack-allocated ErlDrvTermData spec[] array without checking bounds. A remote attacker who has established an SCTP association to a listening port can send a single crafted SCTP ERROR chunk containing enough cause codes to overflow the stack buffer, crashing the VM. The attacker can only write 16-bit values interleaved with a fixed tag, so the overflow does not provide a controlled return address, limiting exploitation to Denial of Service.
A crafted SCTP ERROR chunk may also leak bits and pieces of Erlang VM memory into the received error packet observed by the Erlang process. Such data is already readable by the user running the Erlang VM, so the disclosure scope is limited.
This issue affects OTP from OTP 17.0 before 27.3.4.13, 28.5.0.2 and 29.0.2, corresponding to erts from 6.0 before 15.2.7.9, 16.4.0.2 and 17.0.2. |
| Observable Timing Discrepancy vulnerability in Erlang/OTP ssh (ssh_auth, ssh_options modules) allows unauthenticated remote username enumeration via timing side-channel in password authentication.
When the SSH daemon is configured with the user_passwords or password option, ssh_auth:check_password/3 performs a PBKDF2-SHA256 computation with 600,000 iterations (~300ms) for valid usernames, but returns immediately (~0ms) for invalid usernames via the ssh_options:get_password_option/2 path. This timing difference is detectable in a single authentication attempt and allows an unauthenticated attacker to distinguish valid from invalid usernames.
The user_passwords and password options are documented as intended for test purposes; the recommended alternative is pwdfun, which is not affected by this vulnerability.
This vulnerability is associated with program files lib/ssh/src/ssh_auth.erl and lib/ssh/src/ssh_options.erl.
This issue affects OTP from OTP 29.0 before 29.0.2 corresponding to ssh from 6.0 before 6.0.1. |
| The "profiling.sampling" module (Python 3.15+) and "asyncio introspection capabilities" (3.14+, "python -m asyncio ps" and "python -m asyncio pstree") features could be used to read and write addresses in a privileged process if that process connected to a malicious or "infected" Python process via the remote debugging feature. This vulnerability requires persistently and repeatedly connecting to the process to be exploited, even after the connecting process crashes with high likelihood due to ASLR. |
| `xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch. |
| tarfile.data_filter could be bypassed using crafted link entries, including symlinks with empty or directory-like names, to redirect later archive members outside the intended extraction directory. This allowed a malicious tar archive to cause tarfile.extractall() to write files outside the destination directory, subject to the permissions of the extracting process. |
| The ftpcp() function in Lib/ftplib.py was not updated when
CVE-2021-4189 was fixed. While makepasv() was patched to replace
server-supplied PASV host addresses with the actual peer address
(getpeername()[0]), ftpcp() still calls parse227() directly and passes
the raw attacker-controllable IP address and port to target.sendport(). This patch is related to CVE-2021-4189. |
| bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) |
| The $_internalApplyOplogUpdate aggregation pipeline stage can be used to execute a document diff containing a malformed binary diff to return memory out-of-bounds or crash the server. $_internalApplyOplogUpdate can be executed by any authenticated user with access to the aggregate command. |
| A command injection vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to execute arbitrary commands.
We have already fixed the vulnerability in the following versions:
QTS 5.2.9.3410 build 20260214 and later
QuTS hero h5.2.9.3410 build 20260214 and later
QuTS hero h5.3.4.3500 build 20260520 and later
QuTS hero h6.0.0.3397 build 20260206 and later |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads
The pads missed checks for connected devices which may a null dereference
when the stream is enabled.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
pc : rkcif_interface_enable_streams+0x48/0xf0
lr : rkcif_interface_enable_streams+0x44/0xf0
Call trace:
rkcif_interface_enable_streams+0x48/0xf0
v4l2_subdev_enable_streams+0x26c/0x3f0
rkcif_stream_start_streaming+0x140/0x278
vb2_start_streaming+0x74/0x188
vb2_core_streamon+0xe0/0x1d8
vb2_ioctl_streamon+0x60/0xa8
v4l_streamon+0x2c/0x40
__video_do_ioctl+0x34c/0x400
video_usercopy+0x2d0/0x800
video_ioctl2+0x20/0x60
v4l2_ioctl+0x48/0x78 |
| Fission is an open-source, Kubernetes-native serverless framework that simplifies the deployment of functions and applications on Kubernetes. Prior to version 1.24.0, Fission's Environment CRD exposes spec.runtime.podSpec and spec.builder.podSpec, which are merged into the Kubernetes pod specs for runtime and builder pods. The merge logic propagated hostNetwork, hostPID, hostIPC, container privileged, and serviceAccountName from the user-supplied podspec with no filtering, and Environment.Validate performed no security-relevant checks on these fields. This issue has been patched in version 1.24.0. |
| CleanWipe Removal Tool (macOS), prior to 16.0.0.65, may be susceptible to an Local Privilege Escalation vulnerability, which is a type of issue whereby an attacker with limited privilege access on an affected system can escalate their privileges to gain administrative control. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device name memory leak
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e) |
| Fission is an open-source, Kubernetes-native serverless framework that simplifies the deployment of functions and applications on Kubernetes. Prior to version 1.23.0, the Fission router registers an internal-style route — /fission-function/<name> and /fission-function/<ns>/<name> — for every Function object, independent of whether any HTTPTrigger exists for that function. The route was mounted on the same listener as user-defined HTTPTriggers (svc/router, port 8888), so any caller who could reach the router could invoke any function by guessing its metadata.name (and namespace), bypassing the host / path / method / method-allow-list restrictions encoded in HTTPTrigger objects. This issue has been patched in version 1.23.0. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on unbind
The state machine work is scheduled by the interrupt handler and
therefore needs to be cancelled after disabling interrupts to avoid a
potential use-after-free. |
| Fission is an open-source, Kubernetes-native serverless framework that simplifies the deployment of functions and applications on Kubernetes. Prior to version 1.24.0, Fission builder pods were created with ServiceAccountName: fission-builder and no AutomountServiceAccountToken: false, so the kubelet auto-mounted the service-account token into every container in the pod — including the user-supplied builder image. This issue has been patched in version 1.24.0. |
