| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent race between disconnect() and rtx
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Bound SW TPA IDs to prevent crashes
FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range
0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for
57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a
software ID which is used to index rxr->rx_tpa, and to generate a mapping
between FW IDs and the wrapped software ID.
On a 57608 with firmware version 233, the firmware advertises 32
concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC
is set to 32.
If the software ID from bnxt_alloc_agg_idx is above 31, this results in
an invalid address being loaded on this line:
tpa_info = &rxr->rx_tpa[agg_id];
because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes
to tpa_info later in the code are out of bounds.
This bug results in a crash at boot:
Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI
RIP: 0010:bnxt_rx_pkt+0xc0/0x1560
RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516
RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0
RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048
R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516
R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680
FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? __netif_receive_skb_list_core+0x1ca/0x250
__bnxt_poll_work+0x152/0x280
bnxt_poll_p5+0x1cd/0x480
__napi_poll+0x30/0x180
net_rx_action+0x20b/0x3b0
? note_gp_changes+0x53/0xe0
? tick_setup_sched_timer+0x180/0x180
? __napi_schedule+0x9a/0xb0
? bnxt_msix+0x24/0x30
handle_softirqs+0xdd/0x2c0
__irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0
common_interrupt+0x85/0x90
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
This stack trace is from a crash triggered when an out of bounds rx_tpa
is dereferenced. The invalid write mentioned above is silent in this
particular crash.
Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next
power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID
with that size, so the wrapped ID can never index past the end of the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: validate CLC firmware records
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying. |
| The AIL Framework (ail-project/ail-framework) contains a stored cross-site scripting (XSS) vulnerability in two Jinja2 templates that render popovers for matched, tracked, or tagged content: var/www/templates/chats_explorer/block_message.html and var/www/templates/objects/item/show_item.html. In both templates, dynamic values associated with this content, including icon color, icon style, icon glyph, subtype, identifier, name, description, and matched value, are interpolated directly into the data-content HTML attribute of Bootstrap popover elements without appropriate output encoding. Because the popovers are configured with data-html="true", the content is interpreted as HTML in the victim's browser. An authenticated attacker who can influence matched, tracked, or tagged content may inject arbitrary HTML or JavaScript into these values. When a victim displays the affected popover, the injected markup may execute in the victim's session, potentially enabling data exfiltration or actions with the victim's privileges. The vulnerability is classified as stored XSS because the malicious payload can persist in the affected match, tracking, or tag-related data and be delivered to users who view the affected content. |
| Use after free in Windows Management Instrumentation allows an authorized attacker to elevate privileges over a network. |
| In openLogicalChannel of multiple files, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In checkUiccListenConfigNeeded of RoutingManager.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In AppendCommentLine of AnnotationProcessor.cpp, there is a possible supply chain risk due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| When Neethi fetches a remote policy reference, it only limits the time per read, not the whole transfer, so a server that trickles bytes slowly can keep the fetch alive indefinitely and tie up the calling thread (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| The OpenStation — Desktop Windows, Dock & Virtual Desktops for WP Admin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.1.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to read the title, status, date, permalink, and a 300-character content excerpt of any private, draft, pending, or future post, as well as the content and AI-moderation verdicts of unapproved and spam comments. Any authenticated user with the 'read' capability can self-enable the required AI feature by visiting the /openstation/ portal and toggling their own ai.enabled setting via the POST /desktop-mode/v1/os-settings endpoint, removing any practical barrier to exploitation. |
| The CSS & JavaScript Toolbox plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's cjtoolbox shortcode in all versions up to, and including, 12.0.6 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The HT Contact Form – Drag & Drop Form Builder for WordPress plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via 'form_data' Rich Text Field via Draft Save/Resume in all versions up to, and including, 2.10.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires tricking a user into clicking an attacker-supplied draft resume URL, which the attacker constructs using the draft_key and access_token returned directly in the save response. |
| The Gutenverse – WordPress Blocks, Page Builder & Site Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Post Comment Block 'suffixMain' Attribute in all versions up to, and including, 4.0.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress core wp_kses_post sanitization does not mitigate this vulnerability because the payload is stored inside a Gutenberg block delimiter comment rather than as a raw HTML tag, and is only rendered as exploitable HTML at the PHP render stage. |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'jfb_xss' (URL Query Variable) Parameter via Calculated Field in all versions up to, and including, 3.6.5.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires the targeted page to host a form configured with both a URL Query Variable preset field and a Calculated Field that references it, which are standard plugin features. |
| The Customer Reviews for WooCommerce plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.120.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to permanently delete arbitrary attachments from the Media Library — including administrator-owned product images, logos, and documents — by injecting their IDs into a review that is later trashed and purged. Exploitation requires a public review-form link (a 13-hex formId distributed to customers via e-mail), which exposes the nonce needed to reach the handler without any WordPress account or session. |
| The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'output_format' parameter in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the Pro Export/Genius feature to be enabled on the site, as the vulnerable fpd_pr_export AJAX action is only registered when that feature is active. |
