| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix double free related to rereg_user_mr
If IB_MR_REREG_TRANS is set during rereg_user_mr, the
umem will be released and a new one will be allocated
in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans
fails after the new umem is allocated, it releases the umem,
but does not set iwmr->region to NULL. The problem is that
this failure is propagated to the user, who will then call
ibv_dereg_mr (as they should). Then, the dereg_mr path will
see a non-NULL umem and attempt to call ib_umem_release again.
Fix this by setting iwmr->region to NULL after ib_umem_release.
Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: tighten UMEM headroom validation to account for tailroom and min frame
The current headroom validation in xdp_umem_reg() could leave us with
insufficient space dedicated to even receive minimum-sized ethernet
frame. Furthermore if multi-buffer would come to play then
skb_shared_info stored at the end of XSK frame would be corrupted.
HW typically works with 128-aligned sizes so let us provide this value
as bare minimum.
Multi-buffer setting is known later in the configuration process so
besides accounting for 128 bytes, let us also take care of tailroom space
upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: make hash table per queue
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ioam6: fix OOB and missing lock
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register ID for BPF_END value tracking
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies. |
| The Sky Addons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `sky-custom-scripts` custom post type in all versions up to, and including, 3.3.2. This is due to the custom post type being registered with `capability_type => 'post'` and `show_in_rest => true`, combined with insufficient input sanitization on the `sky_script_content` meta field and lack of output escaping when rendering scripts on the frontend. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts via the REST API that execute on every frontend page for all site visitors. |
| A security vulnerability has been detected in SourceCodester Pizzafy Ecommerce System 1.0. This issue affects some unknown processing of the file /admin/index.php. Such manipulation of the argument page leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. |
| A security vulnerability has been detected in GPAC up to 26.02.0. This affects the function sidx_box_read of the file src/isomedia/box_code_base.c. The manipulation leads to allocation of resources. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The identifier of the patch is 442e2299530138d8f874fd885c565ba98a6318ba. It is suggested to install a patch to address this issue. |
