| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| Fleet is open source device management software. A SQL injection vulnerability in versions prior to 4.80.1 allowed authenticated users to inject arbitrary SQL expressions via the `order_key` query parameter. Due to unsafe use of `goqu.I()` when constructing the `ORDER BY` clause, specially crafted input could escape identifier quoting and be interpreted as executable SQL. An authenticated attacker with access to the affected endpoint could inject SQL expressions into the underlying MySQL query. Although the injection occurs in an `ORDER BY` context, it is sufficient to enable blind SQL injection techniques that can disclose database information through conditional expressions that affect result ordering. Crafted expressions may also cause excessive computation or query failures, potentially leading to degraded performance or denial of service. No direct evidence of reliable data modification or stacked query execution was demonstrated. Version 4.80.1 fixes the issue. If an immediate upgrade is not possible, users should restrict access to the affected endpoint to trusted roles only and ensure that any user-supplied sort or column parameters are strictly allow-listed at the application or proxy layer. |
| LORIS (Longitudinal Online Research and Imaging System) is a self-hosted web application that provides data- and project-management for neuroimaging research. Starting in version 24.0.0 and prior to versions 26.0.5, 27.0.2, and 28.0.0, an authenticated user with the appropriate authorization can read configuration files on the server by exploiting a path traversal vulnerability. Some of these files contain hard-coded credentials. The vulnerability allows an attacker to read configuration files containing hard-coded credentials. The attacker could then authenticate to the database or other services if those credentials are reused. The attacker must be authenticated and have the required permissions. However, the vulnerability is easy to exploit and the application source code is public. This problem is fixed in LORIS v26.0.5 and v27.0.2 and above, and v28.0.0 and above. As a workaround, the electrophysiogy_browser in LORIS can be disabled by an administrator using the module manager. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to limit the blast radius. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijacking and account takeover. The issues have been fixed in n8n versions 2.10.1 and 1.123.21. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Webhook node by adding `n8n-nodes-base.webhook` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, a second-order expression injection vulnerability existed in n8n's Form nodes that could allow an unauthenticated attacker to inject and evaluate arbitrary n8n expressions by submitting crafted form data. When chained with an expression sandbox escape, this could escalate to remote code execution on the n8n host. The vulnerability requires a specific workflow configuration to be exploitable. First, a form node with a field interpolating a value provided by an unauthenticated user, e.g. a form submitted value. Second, the field value must begin with an `=` character, which caused n8n to treat it as an expression and triggered a double-evaluation of the field content. There is no practical reason for a workflow designer to prefix a field with `=` intentionally — the character is not rendered in the output, so the result would not match the designer's expectations. If added accidentally, it would be noticeable and very unlikely to persist. An unauthenticated attacker would need to either know about this specific circumstance on a target instance or discover a matching form by chance. Even when the preconditions are met, the expression injection alone is limited to data accessible within the n8n expression context. Escalation to remote code execution requires chaining with a separate sandbox escape vulnerability. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Review usage of form nodes manually for above mentioned preconditions, disable the Form node by adding `n8n-nodes-base.form` to the `NODES_EXCLUDE` environment variable, and/or disable the Form Trigger node by adding `n8n-nodes-base.formTrigger` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| Budibase is a low code platform for creating internal tools, workflows, and admin panels. Prior to version 3.30.4, an unsafe `eval()` vulnerability in Budibase's view filtering implementation allows any authenticated user (including free tier accounts) to execute arbitrary JavaScript code on the server. This vulnerability ONLY affects Budibase Cloud (SaaS) - self-hosted deployments use native CouchDB views and are not vulnerable. The vulnerability exists in `packages/server/src/db/inMemoryView.ts` where user-controlled view map functions are directly evaluated without sanitization. The primary impact comes from what lives inside the pod's environment: the `app-service` pod runs with secrets baked into its environment variables, including `INTERNAL_API_KEY`, `JWT_SECRET`, CouchDB admin credentials, AWS keys, and more. Using the extracted CouchDB credentials, we verified direct database access, enumerated all tenant databases, and confirmed that user records (email addresses) are readable. Version 3.30.4 contains a patch. |
| The Dart and Flutter SDKs provide software development kits for the Dart programming language. In versions of the Dart SDK prior to 3.11.0 and the Flutter SDK prior to version 3.41.0, when the pub client (`dart pub` and `flutter pub`) extracts a package in the pub cache, a malicious package archive can have files extracted outside the destination directory in the `PUB_CACHE`. A fix has been landed in commit 26c6985c742593d081f8b58450f463a584a4203a. By normalizing the file path before writing file, the attacker can no longer traverse up via a symlink. This patch is released in Dart 3.11.0 and Flutter 3.41.0.vAll packages on pub.dev have been vetted for this vulnerability. New packages are no longer allowed to contain symlinks. The pub client itself doesn't upload symlinks, but duplicates the linked entry, and has been doing this for years. Those whose dependencies are all from pub.dev, third-party repositories trusted to not contain malicious code, or git dependencies are not affected by this vulnerability. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, `discourse-policy` plugin allows any authenticated user to interact with policies on posts they do not have permission to view. The `PolicyController` loads posts by ID without verifying the current user's access, enabling policy group members to accept/unaccept policies on posts in private categories or PMs they cannot see and any authenticated user to enumerate which post IDs have policies attached via differentiated error responses (information disclosure). The issue is patched in versions 2025.12.2, 2026.1.1, and 2026.2.0 by adding a `guardian.can_see?(@post)` check in the `set_post` before_action, ensuring post visibility is verified before any policy action is processed. As a workaround, disabling the discourse-policy plugin (`policy_enabled = false`) eliminates the vulnerability. There is no other workaround without upgrading. |
| Discourse is an open source discussion platform. Versions prior to 2025.12.2, 2026.1.1, and 2026.2.0 have an IDOR (Insecure Direct Object Reference) in `ReviewableNotesController`. When `enable_category_group_moderation` is enabled, a user belonging to a category moderation group can create or delete their own notes on **any** reviewable in the system, including reviewables in categories they do not moderate. The controller used an unscoped `Reviewable.find` and the `ensure_can_see` guard only checked whether the user could access the review queue in general, not whether they could access the specific reviewable. Only instances with `enable_category_group_moderation` enabled are affected. Staff users (admins/moderators) are not impacted as they already have access to all reviewables. The issue is patched in versions 2025.12.2, 2026.1.1, and 2026.2.0 by scoping the reviewable lookup through `Reviewable.viewable_by(current_user)`. As a workaround, disable the `enable_category_group_moderation` site setting. This removes the attack surface as only staff users will have access to the review queue. |
| Charging station authentication identifiers are publicly accessible via web-based mapping platforms. |
| WebSocket endpoints lack proper authentication mechanisms, enabling
attackers to perform unauthorized station impersonation and manipulate
data sent to the backend. An unauthenticated attacker can connect to the
OCPP WebSocket endpoint using a known or discovered charging station
identifier, then issue or receive OCPP commands as a legitimate charger.
Given that no authentication is required, this can lead to privilege
escalation, unauthorized control of charging infrastructure, and
corruption of charging network data reported to the backend. |
| The WebSocket Application Programming Interface lacks restrictions on
the number of authentication requests. This absence of rate limiting may
allow an attacker to conduct denial-of-service attacks by suppressing
or misrouting legitimate charger telemetry, or conduct brute-force
attacks to gain unauthorized access. |
| The WebSocket backend uses charging station identifiers to uniquely
associate sessions but allows multiple endpoints to connect using the
same session identifier. This implementation results in predictable
session identifiers and enables session hijacking or shadowing, where
the most recent connection displaces the legitimate charging station and
receives backend commands intended for that station. This vulnerability
may allow unauthorized users to authenticate as other users or enable a
malicious actor to cause a denial-of-service condition by overwhelming
the backend with valid session requests. |
| A vulnerability in Google Cloud Vertex AI Workbench from 7/21/2025 to 01/30/2026 allows an attacker to exfiltrate valid Google Cloud access tokens of other users via abuse of a built-in startup script.
All instances after January 30th, 2026 have been patched to protect from this vulnerability. No user action is required for this. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in hexpm hexpm/hexpm ('Elixir.Hexpm.Store.Local' module) allows Relative Path Traversal. This vulnerability is associated with program files lib/hexpm/store/local.ex and program routines 'Elixir.Hexpm.Store.Local':get/3, 'Elixir.Hexpm.Store.Local':put/4, 'Elixir.Hexpm.Store.Local':delete/2, 'Elixir.Hexpm.Store.Local':delete_many/2.
This issue does NOT affect hex.pm the service. Only self-hosted deployments using the Local Storage backend are affected.
This issue affects hexpm: from 931ee0ed46fa89218e0400a4f6e6d15f96406050 before 5d2ccd2f14f45a63225a73fb5b1c937baf36fdc0. |
| WebSocket endpoints lack proper authentication mechanisms, enabling
attackers to perform unauthorized station impersonation and manipulate
data sent to the backend. An unauthenticated attacker can connect to the
OCPP WebSocket endpoint using a known or discovered charging station
identifier, then issue or receive OCPP commands as a legitimate charger.
Given that no authentication is required, this can lead to privilege
escalation, unauthorized control of charging infrastructure, and
corruption of charging network data reported to the backend. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, SQL injection in PM tag filtering (`list_private_messages_tag`) allows bypassing tag filter conditions, potentially disclosing unauthorized private message metadata. Versions 2025.12.2, 2026.1.1, and 2026.2.0 patch the issue. No known workarounds are available. |
