| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| mapfish-print is a component of MapFish for printing templated cartographic maps. From 3.23.0 to before 3.28.28, 3.30.30, 3.31.22, 3.33.14, and 4.0.3, the attacker can execute arbitrary code in Dynamic table without being authenticated. This vulnerability is fixed in 3.28.28, 3.30.30, 3.31.22, 3.33.14, and 4.0.3. |
| SDMC NE6037 cable modem routers running firmware 7.1.6.0.25 and 7.1.6.1.9_B9 contain a hardcoded password vulnerability in the web management interface recovery endpoints (mgmt.php, npcmd.php) that allows unauthenticated attackers to gain root access by submitting the hardcoded credential to the recovery endpoint via HTTP. Attackers can leverage this hardcoded password to enable filtered SSH and Telnet services on the device, resulting in unauthenticated root-level remote access to the underlying system. |
| Due to improper enforcement of authentication rate-limiting on a debug SSH service in Archer C64 v1, the SSH service allows unlimited authentication attempts and uses the same credentials as the web interface. This enables an attacker to brute-force valid credentials via SSH.
Successful exploitation could allow an attacker with adjacent network access to obtain administrative credentials through unrestricted authentication attempts and subsequently gain full administrative access to the device, impacting system confidentiality, integrity, and availability. |
| GitButler is a modern Git-based version control interface for AI-powered workflows. Prior to 0.19.7, a emote code execution vulnerability exists in the Tauri-based GitButler desktop application. An attacker can inject a malicious link in a pull request body, which if clicked by the user allows for arbitrary script execution in the Tauri webview. Users that have not enabled forge integration are not at risk. This vulnerability is fixed in 0.19.7. |
| TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization.
An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization.
An attacker
within the Bluetooth range could exploit this behavior using Bluetooth sniffing
or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth
communication, manipulate transmitted setup data and potentially gain
unauthorized control of the device during initialization.
D100C is the
chime delivered with your Tapo camera, and it is delivered with the following
Tapo products:
D130, D210, D235,
D225, TD21, TDB21 and TD25 |
| CodeWhale is a DeepSeek + MiMo coding agent in terminal. From 0.3.0 to 0.8.23, the run_tests tool executes cargo test in the workspace with ApprovalRequirement::Auto, meaning it runs without any user approval prompt. cargo test compiles and executes arbitrary code: test binaries, build.rs build scripts, and proc macros. While auto-approving test execution is a deliberate design choice, it creates an inconsistency in the security boundary. However, in a malicious repository, test code can execute arbitrary shell commands, exfiltrate credentials, or establish persistence with zero approval. The attack is amplified by AGENTS.md (auto-loaded into the system prompt), which can instruct the model to run tests proactively at session start. This vulnerability is fixed in 0.8.23. |
| Speakr is a personal, self-hosted web application designed for transcribing audio recordings. Prior to 0.8.20-alpha, the is_safe_url() helper used to validate post-login redirect targets applied urljoin(request.host_url, target) before parsing, while the controller passed the raw target to redirect(). A scheme-relative input such as ////evil.com resolved to a same-host URL during validation but was emitted verbatim in the Location header, where the browser interpreted it as a network-path-relative redirect to an attacker-controlled host. This vulnerability is fixed in 0.8.20-alpha. |
| deepobj provides get, set, delete deep objects in javascript. Prior to 1.0.3, prototype pollution is possible when property paths contain __proto__/constructor/prototype. The property path must not be exposed as user input. This vulnerability is fixed in 1.0.3. |
| vllm-project/vllm version 0.14.1 contains a vulnerability where the `trust_remote_code=True` parameter is hardcoded in two model implementation files (`vllm/model_executor/models/nemotron_vl.py` and `vllm/model_executor/models/kimi_k25.py`). This bypasses the user's explicit `--trust-remote-code=False` setting, enabling remote code execution via malicious HuggingFace model repositories. This issue is an incomplete fix for CVE-2025-66448 and CVE-2026-22807, as it affects separate code paths in model implementation files. Deployments loading NemotronVL or KimiK25 models are particularly impacted. |
| Music Player Daemon (MPD) before version 0.24.11 contains a path traversal vulnerability in LocalStorage::MapFSOrThrow and LocalStorage::MapUTF8 within the local storage plugin, where the on-disk path is constructed by joining the storage root with a user-supplied URI as plain strings without canonicalization, allowing '..' segments to survive into the resolved path and be flattened by the kernel at openat() time. An unauthenticated attacker can exploit this flaw using the listfiles command to enumerate names, sizes, and modification times of arbitrary directories readable by the MPD process, and the albumart command to read image files in any attacker-chosen directory outside the configured music_directory. |
| A firmware update mechanism in the affected charging controller fails to validate the authenticity of firmware packages delivered through the device's management interface. Because cryptographic signatures are not verified, an attacker with the ability to interfere with or impersonate the management channel could cause the device to install an unauthorized firmware package. This condition could allow execution of unauthorized code with high privileges on the device. |
| Parsing arbitrary HTML can consume excessive CPU time, possibly leading to denial of service. |
| A stack-based buffer overflow vulnerability in the charging controller’s signal-processing logic allows an attacker with physical access to the charging interface to supply message fields that exceed expected bounds. Because the input is not sufficiently validated, memory corruption may occur, which can lead to execution of unauthorized code with elevated privileges. |
| A configuration weakness in the device’s remote management service allows an authenticated session to be established over a communication channel intended solely for vehicle-charger signaling. The service is accessible on interfaces exposed through the charging connector, and it accepts a default administrative credential. A malicious device physically connected to the charging interface could leverage this misconfiguration to obtain full administrative access. |
| Music Player Daemon (MPD) before version 0.24.11 contains a server-side request forgery vulnerability in CurlInputPlugin where CURLOPT_FOLLOWLOCATION is set without CURLOPT_REDIR_PROTOCOLS_STR, allowing unauthenticated attackers to bypass the http/https scheme restriction by causing a malicious HTTP server to redirect to non-HTTP protocols such as gopher, ftp, sftp, ldap, dict, rtmp, or rtsp. Attackers can trigger this vulnerability via MPD commands that initiate URL fetches, including add, readcomments, albumart, readpicture, or load, to interact with internal or restricted network services on systems running libcurl versions prior to 7.85.0. |
| Music Player Daemon (MPD) before version 0.24.11 contains a CRLF injection vulnerability in the xspf_char_data function within the XSPF playlist plugin that allows attackers to embed literal CR/LF bytes in URI fields by supplying a malicious XSPF playlist with XML numeric character references. Attackers can inject forged key-value lines through the location field into MPD protocol responses including playlistinfo, currentsong, and listplaylist outputs, as well as the state file writer, by exploiting Expat's decoding of numeric character references prior to the character data callback. |
| Insecure default settings of Portainer CE grant regular (non-admin) users privileges that allow host filesystem access and host-level code execution. An authenticated non-administrative user with endpoint access can exploit these settings to read host files or obtain root equivalent
access on the host. |
| Billy is an interface filesystem abstraction for Go. Prior to 5.9.0, multiple path traversal issues exist across different components of go-billy. Insufficient path sanitization and boundary enforcement may allow crafted paths (e.g., using ..) to escape intended base directories. While go-billy was not originally designed to provide a strong security boundary, some of these issues were inconsistent across some of the built-in implementations. This results in scenarios where applications relying on go-billy for some level of isolation may inadvertently expose access to unintended filesystem locations. This vulnerability is fixed in 5.9.0. |
| The Post Snippets plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 4.0.19. This is due to insufficient output escaping of imported snippet content when rendering JavaScript variables in the post editor. Specifically, the `jqueryUiDialog()` method in `WPEditor.php` embeds snippet content directly into JavaScript string literals without escaping double quotes (the quote-escaping code on line 214 is commented out). When snippets are imported via the Import/Export feature, the content bypasses WordPress's `wp_magic_quotes()` (which would otherwise add protective backslashes), allowing double quotes in snippet content to break out of the JavaScript string context. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts via a malicious import file that execute whenever any administrator accesses a post editor page. Please note that this does not affect single-site installations as administrators already have the `unfiltered_html` capability. |
| The Poll Maker – Versus Polls, Anonymous Polls, Image Polls plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to and including 6.3.7. This is due to insufficient access controls on the 'ays_poll_get_user_information' AJAX action, which serializes and returns the complete WP_User object — including the user_pass (bcrypt password hash), user_email, user_login, user_registered, roles, and all capabilities — without any nonce verification or capability check beyond is_user_logged_in(). This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve sensitive account data including their own password hash, which WordPress does not expose through any of its standard interfaces and which can be leveraged for offline password-cracking attacks. |
