| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register ID for BPF_END value tracking
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies. |
| The Sky Addons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `sky-custom-scripts` custom post type in all versions up to, and including, 3.3.2. This is due to the custom post type being registered with `capability_type => 'post'` and `show_in_rest => true`, combined with insufficient input sanitization on the `sky_script_content` meta field and lack of output escaping when rendering scripts on the frontend. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts via the REST API that execute on every frontend page for all site visitors. |
| A security vulnerability has been detected in SourceCodester Pizzafy Ecommerce System 1.0. This issue affects some unknown processing of the file /admin/index.php. Such manipulation of the argument page leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. |
| A security vulnerability has been detected in GPAC up to 26.02.0. This affects the function sidx_box_read of the file src/isomedia/box_code_base.c. The manipulation leads to allocation of resources. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The identifier of the patch is 442e2299530138d8f874fd885c565ba98a6318ba. It is suggested to install a patch to address this issue. |
| The NMR Strava activities plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `strava_nmr_connect` shortcode in all versions up to, and including, 1.0.14 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability was identified in SourceCodester SUP Online Shopping 1.0. This affects an unknown function of the file /admin/message.php. The manipulation of the argument seenid leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.14, Heimdall performs host matching in a case-sensitive manner, while HTTP hostnames are case-insensitive. This discrepancy can result in heimdall failing to match a rule for a request host that differs only in letter casing, potentially causing the request to be classified differently than intended. This issue has been patched in version 0.17.14. |
| A vulnerability was found in Tenda CX12L 16.03.53.12. This issue affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg”. The manipulation results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
| Alkacon OpenCms before 16 allows XXE when the <!DOCTYPE> refers to an external host. |
| 1C-Bitrix through 25.100.500 allows Remote Code Execution because an actor with SOURCE/WRITE permissions for the Translate Module can upload and execute code by sending a PHP file and a .htaccess file. NOTE: this is disputed by the Supplier because this is intended behavior for the high-privileged users who can upload new translated pages to the website. |
| RayVentory Scan Engine through 12.6 Update 8 allows attackers to gain privileges if they control the value of the PATH environment variable. NOTE: this is disputed because ability of an attacker to control the environment is a site-specific misconfiguration. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.14, Heimdall performs rule matching on the raw (non-normalized) request path, while downstream components may normalize dot-segments according to RFC 3986, Section 6.2.2.3. This discrepancy can result in heimdall authorizing a request for one path (e.g., /user/../admin, or URL-encoded variants such as /user/%2e%2e/admin or /user/%2e%2e%2fadmin. The latter would require the allow_encoded_slashes option to be set to on or no_decode.) while the downstream ultimately processes a different, normalized path (/admin). This issue has been patched in version 0.17.14. |
