| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenAEV is an open source platform allowing organizations to plan, schedule and conduct cyber adversary simulation campaign and tests. Starting in version 1.0.0 and prior to version 2.0.13, OpenAEV's password reset implementation contains multiple security weaknesses that together allow reliable account takeover. The primary issue is that password reset tokens do not expire. Once a token is generated, it remains valid indefinitely, even if significant time has passed or if newer tokens are issued for the same account. This allows an attacker to accumulate valid password reset tokens over time and reuse them at any point in the future to reset a victim’s password. A secondary weakness is that password reset tokens are only 8 digits long. While an 8-digit numeric token provides 100,000,000 possible combinations (which is secure enough), the ability to generate large numbers of valid tokens drastically reduces the required number of attempts to guess a valid password reset token. For example, if an attacker generates 2,000 valid tokens, the brute-force effort is reduced to approximately 50,000 attempts, which is a trivially achievable number of requests for an automated attack. (100 requests per second can mathematically find a valid password reset token in 500 seconds.) By combining these flaws, an attacker can mass-generate valid password reset tokens and then brute-force them efficiently until a match is found, allowing the attacker to reset the victim’s password to a value of their choosing. The original password is not required, and the attack can be performed entirely without authentication. This vulnerability enables full account takeover that leads to platform compromise. An unauthenticated remote attacker can reset the password of any registered user account and gain complete access without authentication. Because user email addresses are exposed to other users by design, a single guessed or observed email address is sufficient to compromise even administrator accounts with non-guessable email addresses. This design flaw results in a reliable and scalable account takeover vulnerability that affects any registered user account in the system. Note: The vulnerability does not require OpenAEV to have the email service configured. The exploit does not depend on the target email address to be a real email address. It just needs to be registered to OpenAEV. Successful exploitation allows an unauthenticated remote attacker to access sensitive data (such as the Findings section of a simulation), modify payloads executed by deployed agents to compromise all hosts where agents are installed (therefore the Scope is changed). Users should upgrade to version 2.0.13 to receive a fix. |
| xrdp is an open source RDP server. Versions through 0.10.5 have an out-of-bounds read vulnerability in the pre-authentication RDP message parsing logic. A remote, unauthenticated attacker can trigger this flaw by sending a specially crafted sequence of packets during the initial connection phase. This vulnerability results from insufficient validation of input buffer lengths before processing dynamic channel communication. Successful exploitation can lead to a denial-of-service (DoS) condition via a process crash or potential disclosure of sensitive information from the service's memory space. This issue has been fixed in version 0.10.6. |
| Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, the sdl_desc() function does not validate the length of a decoded SDL descriptor from a slice packet. A zero-length descriptor is later used to calculate the number of slice items, causing a division by zero. An unauthenticated attacker can exploit this by sending a crafted slice packet to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14. |
| mcp-neo4j-cypher is an MCP server for executing Cypher queries against Neo4j databases. In versions prior to 0.6.0, the read_only mode enforcement can be bypassed using APOC CALL procedures, potentially allowing unauthorized write operations or server-side request forgery. This issue is fixed in version 0.6.0. |
| SecureDrop Client is a desktop app for journalists to securely communicate with sources and handle submissions on the SecureDrop Workstation. In versions 0.17.4 and below, a compromised SecureDrop Server can achieve code execution on the Client's virtual machine (sd-app) by exploiting improper filename validation in gzip archive extraction, which permits absolute paths and enables overwriting critical files like the SQLite database. Exploitation requires prior compromise of the dedicated SecureDrop Server, which itself is hardened and only accessible via Tor hidden services. Despite the high attack complexity, the vulnerability is rated High severity due to its significant impact on confidentiality, integrity, and availability of decrypted source submissions. This issue is similar to CVE-2025-24888 but occurs through a different code path, and a more robust fix has been implemented in the replacement SecureDrop Inbox codebase. The issue has been fixed in version 0.17.5. |
| xrdp is an open source RDP server. Versions through 0.10.5 have a heap-based buffer overflow in the EGFX (graphics dynamic virtual channel) implementation due to insufficient validation of client-controlled size parameters, allowing an out-of-bounds write via crafted PDUs. Pre-authentication exploitation can crash the process, while post-authentication exploitation may achieve remote code execution. This issue has been fixed in version 0.10.6. If users are unable to immediately update, they should run xrdp as a non-privileged user (default since 0.10.2) to limit the impact of successful exploitation. |
| wger is a free, open-source workout and fitness manager. In versions 2.5 and below, the GymConfigUpdateView declares permission_required = 'config.change_gymconfig' but inherits WgerFormMixin instead of WgerPermissionMixin, so the permission is never enforced at runtime. Since GymConfig is an ownerless singleton, any authenticated user can modify the global gym configuration, triggering save() side effects that bulk-update user profile gym assignments — a vertical privilege escalation to installation-wide configuration control. This issue is fixed in version 2.5. |
| protobufjs compiles protobuf definitions into JavaScript (JS) functions. In versions prior to 8.0.1 and 7.5.5, attackers can inject arbitrary code in the "type" fields of protobuf definitions, which will then execute during object decoding using that definition. Versions 8.0.1 and 7.5.5 patch the issue. |
| Emissary is a P2P based data-driven workflow engine. In versions 8.42.0 and below, Executrix.getCommand() is vulnerable to OS command injection because it interpolates temporary file paths into a /bin/sh -c shell command string without any escaping or input validation. The IN_FILE_ENDING and OUT_FILE_ENDING configuration keys flow directly into these paths, allowing a place author who can write or modify a .cfg file to inject arbitrary shell metacharacters that execute OS commands in the JVM process's security context. The framework already sanitizes placeName via an allowlist before embedding it in the same shell string, but applies no equivalent sanitization to file ending values. No runtime privileges beyond place configuration authorship, and no API or network access, are required to exploit this vulnerability. This is a framework-level defect with no safe mitigation available to downstream implementors, as Executrix provides neither escaping nor documented preconditions against metacharacters in file ending inputs. This issue has been fixed in version 8.43.0. |
| Magento Long Term Support (LTS) is an unofficial, community-driven project provides an alternative to the Magento Community Edition e-commerce platform with a high level of backward compatibility. Prior to version 20.17.0, the shared wishlist add-to-cart endpoint authorizes access with a public `sharing_code`, but loads the acted-on wishlist item by a separate global `wishlist_item_id` and never verifies that the item belongs to the shared wishlist referenced by that code. This lets an attacker use a valid shared wishlist code for wishlist A and a wishlist item ID belonging to victim wishlist B to import victim item B into the attacker's cart through the shared wishlist flow for wishlist A. Because the victim item's stored `buyRequest` is reused during cart import, the victim's private custom-option data is copied into the attacker's quote. If the product uses a file custom option, this can be elevated to cross-user file disclosure because the imported file metadata is preserved and the download endpoint is not ownership-bound. Version 20.17.0 patches the issue. |
| Vexa is an open-source, self-hostable meeting bot API and meeting transcription API. Prior to 0.10.0-260419-1910, the Vexa transcription-collector service exposes an internal endpoint `GET /internal/transcripts/{meeting_id}` that returns transcript data for any meeting without any authentication or authorization checks. An unauthenticated attacker can enumerate all meeting IDs, access any user's meeting transcripts without credentials, and steal confidential business conversations, passwords, and/or PII. Version 0.10.0-260419-1910 patches the issue. |
| The Auth0 Next.js SDK is a library for implementing user authentication in Next.js applications. In versions 4.12.0 through 4.17.1, simultaneous requests that trigger a nonce retry may cause the proxy cache fetcher to perform improper lookups for the token request results. Users are affected if their project uses both the vulnerable versions and the proxy handler /me/* and /my-org/* with DPoP enabled. This issue has been fixed in version 4.18.0. |
| HomeBox is a home inventory and organization system. Versions prior to 0.25.0 contain a vulnerability where the defaultGroup ID remained permanently assigned to a user after being invited to a group, even after their access to that group was revoked. While the web interface correctly enforced the access revocation and prevented the user from viewing or modifying the group's contents, the API did not. Because the original group ID persisted as the user's defaultGroup, and this value was not properly validated when the X-Tenant header was omitted, the user could still perform full CRUD operations on the group's collections through the API, bypassing the intended access controls. This issue has been fixed in version 0.25.0. |
| The Gramps Web API is a Python REST API for the genealogical research software Gramps. Versions 1.6.0 through 3.11.0 have a path traversal vulnerability (Zip Slip) in the media archive import feature. An authenticated user with owner-level privileges can craft a malicious ZIP file with directory-traversal filenames to write arbitrary files outside the intended temporary extraction directory on the server's local filesystem. Startig in version 3.11.1, ZIP entry names are now validated against the resolved real path of the temporary directory before extraction. Any entry whose resolved path falls outside the temporary directory raises an error and aborts the import. |
| WeGIA is a web manager for charitable institutions. In versions prior to 3.6.10, a Stored Cross-Site Scripting (XSS) vulnerability allows an authenticated user to inject malicious JavaScript via the "Nome" field in the "Informações Pacientes" page. The payload is stored and executed when the patient information is viewed. Version 3.6.10 fixes the issue. |
| OpenFGA is an authorization/permission engine built for developers. In versions 0.1.4 through 1.13.1, when OpenFGA is configured to use preshared-key authentication with the built-in playground enabled, the local server includes the preshared API key in the HTML response of the /playground endpoint. The /playground endpoint is enabled by default and does not require authentication. It is intended for local development and debugging and is not designed to be exposed to production environments. Only those who run OpenFGA with `--authn-method` preshared, with the playground enabled, and with the playground endpoint accessible beyond localhost or trusted networks are vulnerable. To remediate the issue, users should upgrade to OpenFGA v1.14.0, or disable the playground by running `./openfga run --playground-enabled=false.` |
| next-intl provides internationalization for Next.js. Applications using the `next-intl` middleware prior to version 4.9.1with `localePrefix: 'as-needed'` could construct URLs where path handling and the WHATWG URL parser resolved a relative redirect target to another host (e.g. scheme-relative `//` or control characters stripped by the URL parser), so the middleware could redirect the browser off-site while the user still started from a trusted app URL. The problem has been patchedin `next-intl@4.9.1`. |
| DOMSanitizer is a DOM/SVG/MathML Sanitizer for PHP 7.3+. Prior to version 1.0.10, DOMSanitizer::sanitize() allows <style> elements in SVG content but never inspects their text content. CSS url() references and @import rules pass through unfiltered, causing the browser to issue HTTP requests to attacker-controlled hosts when the sanitized SVG is rendered. Version 1.0.10 fixes the issue. |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, the proxyUi template engine uses Go's text/template (which performs no HTML escaping) instead of html/template. The GitHub OAuth callback handlers in both publicProxy and dynamicProxy embed the attacker-controlled refreshInterval query parameter verbatim into an error message when time.ParseDuration fails, and render that error unescaped into HTML. An attacker can deliver a crafted login URL to a victim; after the victim completes the GitHub OAuth flow, the callback page executes arbitrary JavaScript in the OAuth server's origin. Version 2.0.1 patches the issue. |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, endpoints.GetSessionCookie parses an attacker-supplied cookie chunk count and calls make([]string, count) with no upper bound before any token validation occurs. The function is reached on every request to an OAuth-protected proxy share, allowing an unauthenticated remote attacker to trigger gigabyte-scale heap allocations per request, leading to process-level OOM termination or repeated goroutine panics. Both publicProxy and dynamicProxy are affected. Version 2.0.1 patches the issue. |
