| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The HT Contact Form – Drag & Drop Form Builder for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'file_upload' parameter in all versions up to, and including, 2.8.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the 'Store Submissions' setting to be enabled, as this controls whether unsanitized field values are persisted to the database and subsequently rendered via dangerouslySetInnerHTML in the admin entry viewer. |
| The PDF Embedder plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.9.3 via the enqueue_block_assets. This makes it possible for authenticated attackers, with contributor-level access and above, to extract configuration data. License key exposure occurs when the premium add-on is also installed and has saved a key; on Lite-only installations, the exposed data is limited to non-sensitive viewer configuration values such as width, height, toolbar settings, usage tracking, and plan. |
| The Photo Gallery by 10Web – Mobile-Friendly Image Gallery plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'order_by' parameter in all versions up to, and including, 1.8.40 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is exploitable by embedding a malicious shortcode in a post or draft, allowing the injected SQL to execute when the shortcode is rendered. |
| The Equalize Digital Accessibility Checker – WCAG, ADA, EAA and Section 508 compliance plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.42.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify the ignore state, ignore reason, and ignore comment of arbitrary accessibility issues across the entire site — including mass modification of all rows sharing an 'object' identifier when largeBatch=true is supplied — corrupting accessibility audit integrity by hiding or dismissing findings outside their authorization scope. |
| The Visualizer: Tables and Charts Manager for WordPress plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.11.14. This is due to a missing capability check on the renderChartPages() and uploadData() functions, where the wp_ajax_visualizer-create-chart and wp_ajax_visualizer-edit-chart AJAX actions invoke renderChartPages() without any current_user_can() check, and wp_ajax_visualizer-upload-data invokes uploadData() which also lacks a capability check and validates its nonce without an action argument, making it trivially bypassable. This makes it possible for authenticated attackers, with Subscriber-level access and above, to create arbitrary chart posts and access or modify chart data belonging to other users, including administrators. |
| Plack::Middleware::Security::Common versions before 0.13.1 for Perl did not block header injections in request paths.
The header injection rule was ineffective at blocking header injections in the request paths unless they were double-encoded, for example,
GET /path\r\nHTTP/1.1\r\nHost: secret.example.com
Note that it is unclear whether request paths with CRLF followed by additional headers would be blocked by reverse proxies, or how they would be processed by Plack-based servers. |
| The Mennekes Amtron series (firmware versions ≤ 5.22.3) is vulnerable to an authentication bypass. An unauthenticated remote attacker can change the password of the user account via a crafted POST request to the /operator/operator endpoint. |
| The Mennekes Amtron series (firmware versions ≤ 5.22.3) is vulnerable to privilege escalation. An authenticated low-privileged user can change the passwords of the admin (operator) and manufacturer accounts via crafted POST requests. |
| A user with physical access to a smartphone can bypass authentication mechanism of Kidsview mobile application and grant himself full access to the device owner's account by interacting with application's push notification.
This issue was fixed in version 4.4.3 |
| Python Liquid is a Python engine for the Liquid template language. Prior to 2.2.0, the built-in FileSystemLoader and CachingFileSystemLoader do not guard against reading files outside their search paths when given an absolute path to resolve. This allows malicious template authors to load and render arbitrary files via the {% include %} and {% render %} tags. Targeted files would need to contain valid Liquid markup and be readable by the application process. This vulnerability is fixed in 2.2.0. |
| mapfish-print is a component of MapFish for printing templated cartographic maps. From 3.23.0 to before 3.28.28, 3.30.30, 3.31.22, 3.33.14, and 4.0.3, the attacker can execute arbitrary code in Dynamic table without being authenticated. This vulnerability is fixed in 3.28.28, 3.30.30, 3.31.22, 3.33.14, and 4.0.3. |
| SDMC NE6037 cable modem routers running firmware 7.1.6.0.25 and 7.1.6.1.9_B9 contain a hardcoded password vulnerability in the web management interface recovery endpoints (mgmt.php, npcmd.php) that allows unauthenticated attackers to gain root access by submitting the hardcoded credential to the recovery endpoint via HTTP. Attackers can leverage this hardcoded password to enable filtered SSH and Telnet services on the device, resulting in unauthenticated root-level remote access to the underlying system. |
| Due to improper enforcement of authentication rate-limiting on a debug SSH service in Archer C64 v1, the SSH service allows unlimited authentication attempts and uses the same credentials as the web interface. This enables an attacker to brute-force valid credentials via SSH.
Successful exploitation could allow an attacker with adjacent network access to obtain administrative credentials through unrestricted authentication attempts and subsequently gain full administrative access to the device, impacting system confidentiality, integrity, and availability. |
| GitButler is a modern Git-based version control interface for AI-powered workflows. Prior to 0.19.7, a emote code execution vulnerability exists in the Tauri-based GitButler desktop application. An attacker can inject a malicious link in a pull request body, which if clicked by the user allows for arbitrary script execution in the Tauri webview. Users that have not enabled forge integration are not at risk. This vulnerability is fixed in 0.19.7. |
| TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization.
An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization.
An attacker
within the Bluetooth range could exploit this behavior using Bluetooth sniffing
or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth
communication, manipulate transmitted setup data and potentially gain
unauthorized control of the device during initialization.
D100C is the
chime delivered with your Tapo camera, and it is delivered with the following
Tapo products:
D130, D210, D235,
D225, TD21, TDB21 and TD25 |
| CodeWhale is a DeepSeek + MiMo coding agent in terminal. From 0.3.0 to 0.8.23, the run_tests tool executes cargo test in the workspace with ApprovalRequirement::Auto, meaning it runs without any user approval prompt. cargo test compiles and executes arbitrary code: test binaries, build.rs build scripts, and proc macros. While auto-approving test execution is a deliberate design choice, it creates an inconsistency in the security boundary. However, in a malicious repository, test code can execute arbitrary shell commands, exfiltrate credentials, or establish persistence with zero approval. The attack is amplified by AGENTS.md (auto-loaded into the system prompt), which can instruct the model to run tests proactively at session start. This vulnerability is fixed in 0.8.23. |
| Speakr is a personal, self-hosted web application designed for transcribing audio recordings. Prior to 0.8.20-alpha, the is_safe_url() helper used to validate post-login redirect targets applied urljoin(request.host_url, target) before parsing, while the controller passed the raw target to redirect(). A scheme-relative input such as ////evil.com resolved to a same-host URL during validation but was emitted verbatim in the Location header, where the browser interpreted it as a network-path-relative redirect to an attacker-controlled host. This vulnerability is fixed in 0.8.20-alpha. |
| deepobj provides get, set, delete deep objects in javascript. Prior to 1.0.3, prototype pollution is possible when property paths contain __proto__/constructor/prototype. The property path must not be exposed as user input. This vulnerability is fixed in 1.0.3. |
| vllm-project/vllm version 0.14.1 contains a vulnerability where the `trust_remote_code=True` parameter is hardcoded in two model implementation files (`vllm/model_executor/models/nemotron_vl.py` and `vllm/model_executor/models/kimi_k25.py`). This bypasses the user's explicit `--trust-remote-code=False` setting, enabling remote code execution via malicious HuggingFace model repositories. This issue is an incomplete fix for CVE-2025-66448 and CVE-2026-22807, as it affects separate code paths in model implementation files. Deployments loading NemotronVL or KimiK25 models are particularly impacted. |
| Music Player Daemon (MPD) before version 0.24.11 contains a path traversal vulnerability in LocalStorage::MapFSOrThrow and LocalStorage::MapUTF8 within the local storage plugin, where the on-disk path is constructed by joining the storage root with a user-supplied URI as plain strings without canonicalization, allowing '..' segments to survive into the resolved path and be flattened by the kernel at openat() time. An unauthenticated attacker can exploit this flaw using the listfiles command to enumerate names, sizes, and modification times of arbitrary directories readable by the MPD process, and the albumart command to read image files in any attacker-chosen directory outside the configured music_directory. |
