| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi_cdl_enable() uses length fields returned by MODE SENSE to locate
the ATA feature mode page in a 64-byte stack buffer. A target can report
a total length shorter than its mode header and block descriptors. The
unsigned subtraction used for the MODE SELECT length can wrap, and the
separately computed buf_data can point beyond buf.
During automatic scan, enable is false, so the read-modify-write of
buf_data[4] can clear the low two bits of a target-selected
out-of-bounds stack byte. scsi_mode_select() can then copy up to 64
bytes from outside the buffer into the outgoing MODE SELECT payload,
disclosing stack contents to the target.
This is reachable while scanning a USB storage device that identifies as
an ATA device and advertises CDL support. No filesystem mount or
userspace access to the block device is required.
On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific,
one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator
sampling executed a fixed proof command inside the guest and created a
UID-0-owned marker during automatic enumeration, with KASLR and NX
enabled.
The issue was independently found during security research at Drivesec
S.r.l.
Cap the available length to the buffer size. Validate and consume the
mode header and block descriptor lengths before using the page, and
require the five bytes needed to access the CDL field. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction use-after-free in raid stripe insertion
If allocation of a RAID stripe extent fails,
btrfs_insert_one_raid_extent() aborts and ends the transaction before
returning -ENOMEM.
btrfs_finish_one_ordered(), the production caller through
btrfs_insert_raid_extent(), still owns the transaction handle. It handles
the error by aborting the transaction and then reaches the common exit
path, which ends the transaction again.
The premature end can free the handle and drop its transaction reference.
Transaction cleanup can then free the transaction before the caller's
second abort accesses the handle and transaction, resulting in
use-after-free.
Keep the abort at the failure site, but let the caller's common exit path
end the transaction once, after it has finished using both objects. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: clear txcb->last before writing each descriptor
bcmasp_xmit() only wrote txcb->last = true for the final fragment
of an SKB; non-final fragments left the field untouched. If a
descriptor slot was reused while it still held a stale true from
a previous SKB (possible when tx_spb_ring_full() underreported
fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and
call dev_consume_skb_any() prematurely, freeing the sk_buff while
its remaining fragments were still in flight.
Unconditionally clear txcb->last before the conditional set so every
descriptor slot starts from a known false state regardless of what a
prior transmission left behind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: fs210x: fix possible buffer overflow
In fs210x_effect_scene_info(), a string was copied like this:
strscpy(DST, SRC, strlen(SRC) + 1);
A buffer overflow would happen if strlen(SRC) >= sizeof(DST).
Actually, strscpy() must be used this way:
strscpy(DST, SRC, sizeof(DST));
strscpy(DST, SRC); // defaults to sizeof(DST) |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Check BAR resources before exporting a DMABUF
A DMABUF exports access to BAR resources and, although they are
requested at startup time, we need to ensure they really were reserved
before exporting. Otherwise, it's possible to access unreserved
resources through the export.
Add a check to the DMABUF-creation path. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix race between deleting interface and adding new peer
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Prevent shared tags across queues on Apple A11
On Apple A11, tags of pending commands must be unique across the admin
and IO queues, else the firmware crashes with
"duplicate tag error for tag N", with N being the tag.
Apply the existing workaround for M1 of reserving two tags for the admin
queue to A11. |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix race condition during device registration
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() allocates the msft structure and exposes it
to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If
msft_do_close() executes while hdev->msft_data is already assigned but the
mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates
on an uninitialized mutex, triggering a DEBUG_LOCKS warning:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common
kernel/locking/mutex.c:625 [inline]
WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550
kernel/locking/mutex.c:821
...
Call Trace:
<TASK>
msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693
hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522
hci_dev_do_close net/bluetooth/hci_core.c:499 [inline]
hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0x92d/0xe10 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by moving the queue_work() call in hci_register_dev() to after
idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device
structures and extensions are fully initialized before asynchronous tasks
can access them. Additionally, assign hdev->msft_data in msft_register()
only after mutex_init(&msft->filter_lock) has completed. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Fix use-after-free on field name/type of events with multiple probes
The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and
fprobe events) are created in traceprobe_define_arg_fields() by handing
the probe_arg name/type strings to trace_define_field(), which only
stores the pointers without copying. Those strings are owned by the
trace_probe and are freed when that probe is removed.
An event can have several probes attached. The field list is defined
only once, by the first probe that registers the event, but it is kept
alive by any surviving sibling probe. Deleting just that first probe by
symbol -
# primary A: fields are defined from A's args
echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events
# append B: shares A's event call
echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events
# delete only A (matched by symbol), B survives
echo '-:kprobes/ev vfs_read' >> kprobe_events
frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()),
but trace_probe_unlink() keeps the trace_probe_event because the probe
list is not empty. The event call stays registered via B while its
fields now reference freed memory. Any field lookup then reads it, e.g.
echo 'a1 == 1' > events/kprobes/ev/filter
BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0
Call Trace:
strcmp
trace_find_event_field
parse_pred
process_preds
create_filter
apply_event_filter
event_filter_write
field->name references parg->name (kstrdup'd, freed with the probe) and,
for array arguments, field->type references parg->fmt (kmalloc'd, freed
with the probe) - the scalar type otherwise points at the static
fmttype rodata, which is safe.
Have traceprobe_define_arg_fields() duplicate the name and type strings
and anchor the copies on the trace_probe_event, which embeds the event
call and outlives every individual probe; trace_probe_event_free()
releases them.
The reproducer above triggers reliably; the field lookup and the delete
both run under event_mutex, so this is a dangling reference after
removal rather than a race.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject BPF_PSEUDO_FUNC reference to the main program
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementation, just assume that no useful
program needs main to be a sync or async callback and reject
BPF_PSEUDO_FUNC loads for the main subprogram. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: do not clear curr_active_slave prematurely when releasing all slaves
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond->curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent iteration releasing the active
slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL)
is skipped. Consequently, bond_alb_handle_active_change() is never called
to decrement the promiscuity counter, permanently leaking promiscuous
mode on the physical device after bond teardown.
When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets
bond->curr_active_slave to NULL. We only need to avoid selecting a new
active slave when all == true. Replace the if (all) branch with
if (!all && oldcurrent == slave). |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in release_in_xmit()
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CPU
still reads the bit as set, so the sleeper is never woken.
The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(),
both in uninterruptible wait_event() with no timeout. A lost wake-up
strands the shutdown worker on its single-threaded workqueue until
some other sender releases the bit again - and on a connection that
is being torn down precisely because it failed, there may never be
another sender.
The barrier used to be there: release_in_xmit() did clear_bit()
followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds:
introduce acquire/release ordering in acquire/release_in_xmit()")
folded both into clear_bit_unlock(), which strengthened the lock
hand-off but silently dropped the full barrier the wake-up check
depends on. The refill counterpart, release_refill() in
net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for
exactly this reason.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two bits the reset is actually responsible for instead.
RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they
belong to the caller, rds_conn_shutdown(), which waits for both to be
clear before calling the transport shutdown and this reset.
This also gives every bit in cp_flags a single well-defined writer
discipline, which the following patches rely on when they turn
RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the
teardown: a blanket store mid-teardown would destroy lock ownership
that an atomic clear preserves.
Oracle UEK carries the same conversion ("net/rds: Preserve essential
connection state flags"), motivated by its asynchronous shutdown
state machine, whose progress and destroy flags must survive the
reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL
because there the reset runs as the final step of a teardown that
owns both bits, making those clears its unlock. Upstream that
release belongs in rds_conn_shutdown(): once a later patch in this
series turns the two bits into locks held across the teardown, ending
ownership needs release semantics and a wake-up that a plain clear
inside the reset would not provide.
Based on Oracle UEK commit "net/rds: Preserve essential connection
state flags" by Gerd Rausch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
rds_tcp_reset_callbacks() quiesces the transmit path by setting the
path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to
be sampled clear before swapping the underlying socket and calling
rds_send_path_reset().
Sampling the bit clear is not the same as owning it: rds_send_xmit()
can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its
state recheck after taking the lock is a store-buffering pattern (the
resetter writes the state and reads the bit, the sender writes the
bit and reads the state) and acquire_in_xmit() is only an acquire
operation, so on weakly ordered architectures both sides can miss
each other's write and the transmit path then runs concurrently with
rds_send_path_reset() rewriting cp_xmit_* state - which is exactly
what the comment above rds_send_path_reset() tells its callers to
prevent.
Take the lock instead, hold it across the socket swap and
rds_send_path_reset(), and release it with a wake-up at the end. The
lock-ordering constraint documented above the wait still holds: the
lock is acquired before lock_sock(), so a sender inside tcp_sendmsg()
can never be waited on while we hold the socket lock.
Two details of the old code go away with the same change:
- t_sock is now read only after the lock is acquired. The old code
cached it before waiting; the teardown in rds_conn_shutdown()
releases that socket and clears t_sock, so a pointer cached before
the wait can be stale by the time the accept path resumes. Reading
it under RDS_IN_XMIT is what makes the exclusion complete once the
teardown owns the same lock, which the next patch arranges; until
then the teardown still only samples the bit, and the two paths
remain as exposed to each other as they are today.
- The old !osock early path called rds_send_path_reset() with no
serialization at all. It now runs under the lock like the normal
path. The conditional RDS_CONN_RESETTING transition of the
previous patch happens before the socket check either way: a path
found without a socket is either still connecting (its reconnect
worker blocked on t_conn_path_lock) and legitimately goes
RESETTING -> UP on the new socket, or it has been torn down
meanwhile and is dropped.
The in-function comment describing the old wait-based quiesce is
rewritten to describe the lock-based one, and the stale block comment
above the function (which still described a return value and an
incomplete list of t_sock writers) is refreshed to name all four
writers - the connect, accept, teardown and swap paths - and what
serializes each of them. |