| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Stack-based Buffer Overflow vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a network-based attacker, authenticated with low privileges to cause a Denial-of-Service (DoS).
Subscribing to telemetry sensors at scale causes all FPC connections to drop, resulting in an FPC crash and restart.
The issue was not seen when YANG packages for the specific sensors were installed.
This issue affects Junos OS:
* all versions before 22.4R3-S7,
* 23.2 version before 23.2R2-S4,
* 23.4 versions before 23.4R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS).
On all EX4k and QFX5k platforms, a link flap in an
EVPN-VXLAN configuration Link Aggregation Group (LAG)
results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination.
This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650.
Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command.
This issue affects Junos OS
on EX4k and QFX5k Series:
* all versions before 21.4R3-S12,
* all versions of 22.2
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2. |
| ZITADEL is an open source identity management platform. Prior to 4.9.1 and 3.4.6, a user enumeration vulnerability has been discovered in Zitadel's login interfaces. An unauthenticated attacker can exploit this flaw to confirm the existence of valid user accounts by iterating through usernames and userIDs. This vulnerability is fixed in 4.9.1 and 3.4.6. |
| The Librarian `supervisord` status page can be retrieved by the `web_fetch` tool, which can be used to retrieve running processes within TheLibrarian backend. The vendor has fixed the vulnerability in all affected versions. |
| Lack of input filterung leads to a persistent XSS vulnerability in the user avatar text handling of the Easy Discuss component for Joomla. |
| User provided uploads to the Easy Discuss component for Joomla aren't properly validated. Uploads are purely checked by file extensions, no mime type checks are happening. |
| SmarterTrack 7922 contains an information disclosure vulnerability in the Chat Management search form that reveals agent identification details. Attackers can access the vulnerable /Management/Chat/frmChatSearch.aspx endpoint to retrieve agents' first and last names along with their unique identifiers. |
| An issue in nanomq v0.22.7 allows attackers to cause a Denial of Service (DoS) via a crafted request. The number of data packets received in the recv-q queue of the Nanomq process continues to increase, causing the nanomq broker to fall into a deadlock and be unable to provide normal services. |
| The Awesome Support - WordPress HelpDesk & Support Plugin for WordPress is vulnerable to authorization bypass due to missing capability checks in all versions up to, and including, 6.3.6. This is due to the 'wpas_do_mr_activate_user' function not verifying that a user has permission to modify other users' roles, combined with a nonce reuse vulnerability where public registration nonces are valid for privileged actions because all actions share the same nonce namespace. This makes it possible for unauthenticated attackers to demote administrators to low-privilege roles via the 'wpas-do=mr_activate_user' action with a user-controlled 'user_id' parameter, granted they can access the publicly available registration/submit ticket page to extract a valid nonce. |
| The RSS Aggregator – RSS Import, News Feeds, Feed to Post, and Autoblogging plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘className’ parameter in all versions up to, and including, 5.0.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| Incorrect Implementation of Authentication Algorithm vulnerability in ABB ABB Ability OPTIMAX.This issue affects ABB Ability OPTIMAX: 6.1, 6.2, from 6.3.0 before 6.3.1-251120, from 6.4.0 before 6.4.1-251120. |
| The Cost Calculator Builder plugin for WordPress is vulnerable to Unauthenticated Payment Status Bypass in all versions up to, and including, 3.6.9 only when used in combination with Cost Calculator Builder PRO. This is due to the complete_payment AJAX action being registered via wp_ajax_nopriv, making it accessible to unauthenticated users, and the complete() function only verifying a nonce without checking user capabilities or order ownership. Since nonces are exposed to all visitors via window.ccb_nonces in the page source, any unauthenticated attacker can mark any order's payment status as "completed" without actual payment. |
| The Membership Plugin – Restrict Content plugin for WordPress is vulnerable to Missing Authentication in all versions up to, and including, 3.2.16 via the 'rcp_stripe_create_setup_intent_for_saved_card' function due to missing capability check. Additionally, the plugin does not check a user-controlled key, which makes it possible for unauthenticated attackers to leak Stripe SetupIntent client_secret values for any membership. |
| An SSR XSS exists in async hydration when attacker‑controlled keys are passed to hydratable. The key is embedded inside a <script> block without HTML‑safe escaping, allowing </script> to terminate the script and inject arbitrary JavaScript. This enables remote script execution in users' browsers, with potential for session theft and account compromise.
This issue affects Svelte: from 5.46.0 before 5.46.3. |
| The Shield: Blocks Bots, Protects Users, and Prevents Security Breaches plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 21.0.9 via the MfaGoogleAuthToggle class due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Subscriber-level access and above, to disable Google Authenticator for any user. |
| The Fancy Product Designer plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 6.4.8. This is due to improper error handling in the PDF upload functionality that exposes server filesystem paths and stack traces in error messages. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. |
| The WP Recipe Maker plugin for WordPress is vulnerable to Information Exposure in versions up to, and including, 10.2.2 via the api_get_post_summary function due to insufficient restrictions on which posts can be retrieved. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from posts they may not be able to edit or read otherwise. This also affects password protected, private, or draft posts that they should not have access to. |
| In key-based pairing, there is a possible ID due to a logic error in the code. This could lead to remote (proximal/adjacent) information disclosure of user's conversations and location with no additional execution privileges needed. User interaction is not needed for exploitation. |
| HCL MyXalytics v6.7 is affected by improper management of a static JWT signing secret in the web application, where the secret lacks rotation , introducing a security risk |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource.
This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay.
This issue affects:
Junos OS:
* all versions before 21.2R3-S10,
* all versions of 22.2,
* from 21.4 before 21.4R3-S12,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S2,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R1-S1, 25.2R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S2-EVO,
* from 24.4 before 24.4R2-EVO,
* from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. |
