| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to a heap buffer overflow. |
| A SQL query validation bypass in the Flint extension query handler in the OpenSearch SQL plugin allows a remote authenticated actor with async query access to execute arbitrary code on Apache Spark workers by sending a crafted SQL query to the direct query endpoint. |
| Execution with unnecessary privileges in Microsoft High Performance Computing (HPC) Pack allows an authorized attacker to elevate privileges over a network. |
| CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to properly handle decryption errors and allows encrypted volumes to be mounted as plaintext. |
| amazing-print/amazing_print at commit dc890dfafdf07088ea901df53c19c2710e5c5234 contains a Ruby code injection condition in AwesomeMethodArray#grep. A specially named method containing Ruby interpolation syntax can be interpolated into a dynamically constructed eval string when grep is called with a block, resulting in Ruby code execution in the host process. Exploitation requires an application path that allows an attacker to influence dynamic method names. |
| Unauthenticated Cross Site Scripting (XSS) in SureDash <= 1.10.1 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init()
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: region: fix use-after-free in child_regions_with_firmware()
Move of_node_put(child_region) after the error print to avoid accessing
freed memory when pr_err() references child_region.
[ Yilun: Fix the Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - reject an oversized device packet size
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: touchwin - reset the packet index on every complete packet
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - fix touch indexing for MMS134S and MMS136
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: goodix - clamp the device-reported contact count
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. |
| Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42. |
| The Meeting Room Booking System (MRBS) is a PHP-based application for booking meeting rooms. Prior to version 1.12.2, a user-supplied private/local URI can be made to be fetched without checks. Version 1.12.2 contains a fix. No known workarounds are available. |
| Issue summary: When an OpenSSL QUIC server (Listener SSL object) processes
valid QUIC Initial packets for unknown destination connection IDs, it
can allocate and queue new incoming channels without enforcing any limit.
Impact summary: A remote peer that can make many Initial packets reach the
server listener faster than the application accepts connections, can cause the
memory allocated to store the per-channel state to grow without any limits,
potentially making the QUIC listener unavailable and causing Denial of Service.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The function that handles inbound QUIC packets uses
Connection-Id from the packet header to find an existing connection
(QUIC channel). If no existing connection is found and the packet
type is INITIAL, the function treats the packet as a new connection. It
allocates a new channel object and inserts it into a queue where it
waits to be accepted by the local application with SSL_accept(3ossl).
The memory occupied by these initial channel objects may grow
without bounds if the application is not able to call SSL_accept()
frequently enough to serve these inbound connection requests.
The issue is present since OpenSSL 3.5 when the QUIC server implementation
was added.
The fix introduces a limit for pending connections. The default limit is set
to 256 pending connections (waiting to be accepted by the local application).
Applications may change the default by calling SSL_set_value_uint(3ossl).
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| ColdFusion is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue does not require user interaction. Scope is changed. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| ColdFusion is affected by a Use of a Broken or Risky Cryptographic Algorithm vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue does not require user interaction. |
