| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: davinci: Fix clk use after free
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory
pointed by 'in' is not released, which will cause memory leak. Move memory
release after mlx5_cmd_exec. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix incomplete state save in rxe_requester
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed. |
| Jenkins 2.442 through 2.554 (both inclusive), LTS 2.426.3 through LTS 2.541.2 (both inclusive) performs origin validation of requests made through the CLI WebSocket endpoint by computing the expected origin for comparison using the Host or X-Forwarded-Host HTTP request headers, making it vulnerable to DNS rebinding attacks that allow bypassing origin validation. |
| Jenkins LoadNinja Plugin 2.1 and earlier stores LoadNinja API keys unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. |
| Jenkins LoadNinja Plugin 2.1 and earlier does not mask LoadNinja API keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them. |
| Mura before 10.1.14 allows beanFeed.cfc getQuery sortby SQL injection. |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.2, the Glances REST API web server ships with a default CORS configuration that sets `allow_origins=["*"]` combined with `allow_credentials=True`. When both of these options are enabled together, Starlette's `CORSMiddleware` reflects the requesting `Origin` header value in the `Access-Control-Allow-Origin` response header instead of returning the literal `*` wildcard. This effectively grants any website the ability to make credentialed cross-origin API requests to the Glances server, enabling cross-site data theft of system monitoring information, configuration secrets, and command line arguments from any user who has an active browser session with a Glances instance. Version 4.5.2 fixes the issue. |
| Buffer Overflow vulnerability in giflib v.5.2.2 allows a remote attacker to cause a denial of service via the EGifGCBToExtension overwriting an existing Graphic Control Extension block without validating its allocated size. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. Prior to version 1.68.1, the nghttp2 library stops reading the incoming data when user facing public API `nghttp2_session_terminate_session` or `nghttp2_session_terminate_session2` is called by the application. They might be called internally by the library when it detects the situation that is subject to connection error. Due to the missing internal state validation, the library keeps reading the rest of the data after one of those APIs is called. Then receiving a malformed frame that causes FRAME_SIZE_ERROR causes assertion failure. nghttp2 v1.68.1 adds missing state validation to avoid assertion failure. No known workarounds are available. |
| Vulnerability in the Oracle Identity Manager product of Oracle Fusion Middleware (component: REST WebServices) and Oracle Web Services Manager product of Oracle Fusion Middleware (component: Web Services Security). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Identity Manager and Oracle Web Services Manager. Successful attacks of this vulnerability can result in takeover of Oracle Identity Manager and Oracle Web Services Manager. Note: Oracle Web Services Manager is installed with an Oracle Fusion Middleware Infrastructure. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary Java code as root on an affected device.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root.
Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced. |
| A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain DCA user privileges on an affected system.
This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by sending a crafted HTTP request and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| A vulnerability in Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to view sensitive information on an affected system.
This vulnerability is due to insufficient file system access restrictions. An attacker could exploit this vulnerability by accessing the API of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system. |
| A vulnerability in Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker with low privileges to gain root privileges on the underlying operating system.
This vulnerability is due to an insufficient user authentication mechanism in the REST API. An attacker could exploit this vulnerability by sending a request to the REST API of the affected system. A successful exploit could allow the attacker to gain root privileges on the underlying operating system. |
| A vulnerability in the API user authentication of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain access to an affected system as a user who has the netadmin role.
The vulnerability is due to improper authentication for requests that are sent to the API. An attacker could exploit this vulnerability by sending a crafted request to the API of an affected system. A successful exploit could allow the attacker to execute commands with the privileges of the netadmin role.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| A vulnerability in the API of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to overwrite arbitrary files on the local file system. To exploit this vulnerability, the attacker must have valid read-only credentials with API access on the affected system.
This vulnerability is due to improper file handling on the API interface of an affected system. An attacker could exploit this vulnerability by uploading a malicious file on the local file system. A successful exploit could allow the attacker to overwrite arbitrary files on the affected system and gain vmanage user privileges. |
