| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcAppleDRICreatePixmap() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcXIGetSelectedEvents() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. |
| Hardware logic with insecure de-synchronization in Intel(R) DSA and Intel(R) IAA for some Intel(R) 4th or 5th generation Xeon(R) processors may allow an authorized user to potentially enable escalation of privilege local access |
| The POSIX::2008 package before 0.24 for Perl has a potential _execve50c env buffer overflow. |
| Incorrect Access Control in ASUS RT-N12+ B1 and RT-N12 D1 routers allows local attackers to obtain root terminal access via the the UART interface. |
| A heap buffer overflow vulnerability in the loading of ExecuTorch models can potentially result in code execution or other undesirable effects. This issue affects ExecuTorch prior to commit ede82493dae6d2d43f8c424e7be4721abe5242be |
| A stack-based buffer overflow vulnerability due to a missing bounds check in the NI I/O Trace Tool may result in arbitrary code execution. Successful exploitation requires an attacker to provide a user with a specially crafted nitrace file.
The NI I/O Trace tool is installed as part of the NI System Configuration utilities included with many NI software products. Refer to the NI Security Advisory for identifying the version of NI IO Trace.exe installed. The NI I/O Trace tool was also previously released as NI Spy. |
| A stack-based buffer overflow vulnerability exists in i-Ftp version 2.20 due to improper handling of the Time attribute within Schedule.xml. By placing a specially crafted Schedule.xml file in the i-Ftp application directory, a remote attacker can trigger a buffer overflow during scheduled download parsing, potentially leading to arbitrary code execution or a crash. |
| An unauthenticated remote attacker, who beats a race condition, can exploit a flaw in the communication servers of the CODESYS Control runtime system on Linux and QNX to trigger an out-of-bounds read via crafted socket communication, potentially causing a denial of service. |
| Heap-based Buffer Overflow vulnerability in ABB Terra AC wallbox (UL40/80A), ABB Terra AC wallbox (UL32A), ABB Terra AC wallbox (MID/ CE) -Terra AC MID, ABB Terra AC wallbox (MID/ CE) -Terra AC Juno CE, ABB Terra AC wallbox (MID/ CE) -Terra AC PTB, ABB Terra AC wallbox (JP).This issue affects Terra AC wallbox (UL40/80A): through 1.8.32; Terra AC wallbox (UL32A): through 1.8.2; Terra AC wallbox (MID/ CE) -Terra AC MID: through 1.8.32; Terra AC wallbox (MID/ CE) -Terra AC Juno CE: through 1.8.32; Terra AC wallbox (MID/ CE) -Terra AC PTB: through 1.8.21; Terra AC wallbox (JP): through 1.8.2. |
| Buffer Copy without Checking Size of Input (CWE-120) in the Controller 6000 and Controller 7000 diagnostic web interface allows an authorised and authenticated operator to reboot the Controller, causing a Denial of Service. Gallagher recommend the diagnostic web page is not enabled (default is off) unless advised by Gallagher Technical support. This interface is intended only for diagnostic purposes.
This issue affects: Controller 6000 and Controller 7000 9.10 prior to vCR9.10.240816a (distributed in 9.10.1530 (MR2)), 9.00 prior to vCR9.00.240816a (distributed in 9.00.2168 (MR4)), 8.90 prior to vCR8.90.240816a (distributed in 8.90.2155 (MR5)), 8.80 prior to vCR8.80.240816b (distributed in 8.80.1938 (MR6)), all versions of 8.70 and prior. |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_amcl process. This vulnerability is triggered via sending a crafted .yaml file. |
| docPrint Pro 8.0 contains a local buffer overflow vulnerability in the 'Add URL' input field that allows attackers to execute arbitrary code by overwriting memory. Attackers can craft a malicious payload that triggers a structured exception handler (SEH) overwrite to execute shellcode and gain remote system access. |
| A vulnerability classified as critical has been found in GL.iNet GL-A1300 Slate Plus, GL-AR300M16 Shadow, GL-AR300M Shadow, GL-AR750 Creta, GL-AR750S-EXT Slate, GL-AX1800 Flint, GL-AXT1800 Slate AX, GL-B1300 Convexa-B, GL-B3000 Marble, GL-BE3600 Slate 7, GL-E750, GL-E750V2 Mudi, GL-MT300N-V2 Mango, GL-MT1300 Beryl, GL-MT2500 Brume 2, GL-MT3000 Beryl AX, GL-MT6000 Flint 2, GL-SFT1200 Opal, GL-X300B Collie, GL-X750 Spitz, GL-X3000 Spitz AX, GL-XE300 Puli and GL-XE3000 Puli AX 4.x. Affected is an unknown function of the file plugins.so of the component RPC Handler. The manipulation leads to buffer overflow. It is recommended to upgrade the affected component. |
| Zortam Mp3 Media Studio 27.60 contains a buffer overflow vulnerability in the library creation file selection process that allows remote code execution. Attackers can craft a malicious text file with shellcode to trigger a structured exception handler (SEH) overwrite and execute arbitrary commands on the target system. |
| texlive-bin commit c515e was discovered to contain heap buffer overflow via the function ttfLoadHDMX:ttfdump. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted TTF file. |
| A vulnerability was found in AcademySoftwareFoundation OpenColorIO up to 2.5.0. This issue affects the function ConvertToRegularExpression of the file src/OpenColorIO/FileRules.cpp. Performing a manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is named ebdbb75123c9d5f4643e041314e2bc988a13f20d. To fix this issue, it is recommended to deploy a patch. The fix was added to the 2.5.1 milestone. |
| RedisBloom adds a set of probabilistic data structures to Redis. Starting in version 2.0.0 and prior to version 2.4.7 and 2.6.10, specially crafted `CF.LOADCHUNK` commands may be used by authenticated users to perform heap overflow, which may lead to remote code execution. The problem is fixed in RedisBloom 2.4.7 and 2.6.10.
|
| The product implements access controls via a policy or other feature with the intention to disable or restrict accesses (reads and/or writes) to assets in a system from untrusted agents. However, implemented access controls lack required granularity, which renders the control policy too broad because it allows accesses from unauthorized agents to the security-sensitive assets. (CWE-1220)
Hitachi Vantara Pentaho Business Analytics Server versions before 10.2.0.0 and 9.3.0.9, including 8.3.x, do not correctly perform an authorization check in the user console trash content
An attacker exploits a weakness in the configuration of access controls and is able to bypass the intended protection that these measures guard against and thereby obtain unauthorized access to the system or network. |
| A buffer-overread issue was discovered in StringIO 3.0.1, as distributed in Ruby 3.0.x through 3.0.6 and 3.1.x through 3.1.4. The ungetbyte and ungetc methods on a StringIO can read past the end of a string, and a subsequent call to StringIO.gets may return the memory value. 3.0.3 is the main fixed version; however, for Ruby 3.0 users, a fixed version is stringio 3.0.1.1, and for Ruby 3.1 users, a fixed version is stringio 3.0.1.2. |
