| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In VPU, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In acfw_ffa.c, there is a possible secret read due to a logic error in the code. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| In Cellular Modem, there is a possible permission bypass due to a logic error in the code. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In smmu_install_nested_ste of arm-smmu-v3.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In GPU, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of arm-smmu-v3.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of arm-smmu-v3.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| Vulnerability in the Oracle BI Publisher product of Oracle Analytics (component: Administration). Supported versions that are affected are 8.2.0.0.0, 12.2.1.4.0 and 26.01.0.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle BI Publisher. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle BI Publisher, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle BI Publisher accessible data as well as unauthorized update, insert or delete access to some of Oracle BI Publisher accessible data. CVSS 3.1 Base Score 7.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:L/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: only stop PTP if it was initialized
fec_ptp_init() is only called when fep->bufdesc_ex is available.
However, fec_probe() unconditionally calls fec_ptp_stop() on the
failed_init path, and fec_drv_remove() unconditionally calls
fec_ptp_stop() during device removal.
Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths
to avoid stopping PTP when it was not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: zero referring call lists before decoding
decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so
each referring_call_list starts uninitialized. decode_rc_list() assigns
rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero
referring calls therefore leaves the pointer uninitialized, and
nfs4_callback_sequence() later passes stale slab contents to kfree().
Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is
NULL from the beginning, including valid empty referring call lists. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6
rpcb_register_inet4() and rpcb_register_inet6() store the result of
rpc_sockaddr2uaddr() into map->r_addr without checking it for NULL.
rpc_sockaddr2uaddr() returns NULL when its final kstrdup() fails, and
the unchecked NULL is then carried into the synchronous RPCBPROC_SET
encode path: rpcb_register_call() -> rpc_call_sync() ->
rpcb_enc_getaddr() -> encode_rpcb_string(), whose first statement is
strlen(string), dereferencing NULL and oopsing the kernel.
The crash reproduces under failslab on v6.12; with KASAN the NULL
dereference surfaces as a fault on the shadow of address zero:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000 [#1] PREEMPT SMP KASAN
RIP: 0010:strlen (lib/string.c:409)
Call Trace:
encode_rpcb_string (net/sunrpc/rpcb_clnt.c:890)
rpcb_enc_getaddr (net/sunrpc/rpcb_clnt.c:910)
rpcauth_wrap_req_encode (net/sunrpc/auth.c:745)
call_encode (net/sunrpc/clnt.c:1966)
__rpc_execute (net/sunrpc/sched.c:952)
rpc_run_task (net/sunrpc/clnt.c:1243)
rpc_call_sync (net/sunrpc/clnt.c:1272)
rpcb_v4_register (net/sunrpc/rpcb_clnt.c:500)
svc_generic_rpcbind_set
nfsd_rpcbind_set
svc_register
svc_setup_socket
svc_addsock
write_ports
nfsctl_transaction_write
vfs_write
The crash is reachable when an in-kernel RPC service (nfsd, lockd,
nfs-callback) registers with the local rpcbind under enough memory
pressure for the small GFP_KERNEL kstrdup() in rpc_sockaddr2uaddr() to
fail. The asynchronous getport path already handles this exact failure
mode by returning -ENOMEM; only the two register helpers omit the check.
Mirror that handling: bail out with -ENOMEM when rpc_sockaddr2uaddr()
returns NULL, before the address is fed into the encoder. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip double clone set expressions on element insert
Both the dynset and newsetelem path clone the existing set expressions
when setting set element expressions if no override expressions are
provided. This results in a double clone, once to clone the template set
expressions then another clone on the new element. Add a flag to
annotate if userspace provides a override expression (ie. expression of
the same type of the set but different configuration), otherwise borrow
the existing expression from the set. Add conditionals to release
expression iif they represent an override. Use this new override_exprs
flag to dump the dynset expression override to userspace.
This simplifies the existing logic and it also fixes a bug with the
connlimit expression which results in a module refcount imbalance
WARNING splat when resorting on the default set expressions. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: Ensure that TCP packets don't overflow gso_segs
The user can specify any gso_size in a packet crafted with an AF_PACKET
PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the
same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user
crafts a packet with gso_size < 8, there is a risk for partial GSO to
overflow the 16-bit gso_segs field when dividing the SKB length by
gso_size.
Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep
gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly
tested at tools/testing/selftests/net/tun.c:649. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: usbatm: fix invalid ci_range initialization
syzbot reported a shift-out-of-bounds in __vcc_connect():
UBSAN: shift-out-of-bounds in net/atm/common.c:382:32
shift exponent -1 is negative
CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
__vcc_connect+0x14b4/0x19c0 net/atm/common.c:382
vcc_connect+0x328/0x8f0 net/atm/common.c:498
pvc_bind+0x272/0x380 net/atm/pvc.c:52
__sys_bind+0x2e3/0x410 net/socket.c:1976
__x64_sys_bind+0x7a/0x90 net/socket.c:1979
...
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: move hardware offload step after building the chain blob
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Return zero on status read failure
st33zp24_status() ignores the result of the transport read and returns
data even when no byte was received. The I2C transport, for example,
skips i2c_master_recv() when the register-select write is short or fails,
leaving data uninitialized. The resulting stack value can be interpreted
as TPM_STS flags and let status checks complete spuriously.
The status callback cannot propagate a transport error. Return zero
unless recv() reports exactly one byte. With no status bits set, callers
retry or take their existing timeout or error path instead of acting on
an invalid status value.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98
Same for the XDP branch:
256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_codel: clamp default quantum and mtu
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Fix the condition to enable over-io-uring
The existing condition in fuse_uring_cmd() is there only to avoid
disabling io-uring for connections that already run with it, missing
was a condition to refuse any IORING_OP_URING_CMD if the
connection/channel didn't get enabled because of missing FUSE_INIT
reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in
fuse_uring_ready() doesn't work and IO could already be going on and
cause deadlock states (at a minimum one between fch->bg_lock and
queue->lock).
The change itself is trivial, but brings behavior change,
FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers
to accept any IORING_OP_URING_CMD. Libfuse does that and the only
non-libfuse implementation I found (fractal-fuse) also does it.
Qemu patches for fuse-io-uring are not merged yet, as far as I know.
Moved up is the smp_load_acquire(&fch->initialized) check, as a
fuse-server implementation might try to setup io-uring before FUSE_INIT
is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN.
Also fixed is a stale comment that explains the handling of the
FUSE_OVER_IO_URING flag in early RFC versions.
If there should be a report from any library or application we
probably need to revert this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: fix sleep in atomic context in MAC table access
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c |
