| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double free in ice_sf_eth_activate() error path
When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to
aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev).
The device release callback ice_sf_dev_release() frees sf_dev, but
the current error path falls through to sf_dev_free and calls
kfree(sf_dev) again, causing a double free.
Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but
avoid falling through to sf_dev_free after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: free sk if last
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself". |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: validate rx pkt_type header length
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate dacloffset before building DACL pointers
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: use sk blob accessor in socket permission helpers
SELinux socket state lives in the composite LSM socket blob.
sock_has_perm() and nlmsg_sock_has_extended_perms() currently
dereference sk->sk_security directly, which assumes the SELinux socket
blob is at offset zero.
In stacked configurations that assumption does not hold. If another LSM
allocates socket blob storage before SELinux, these helpers may read the
wrong blob and feed invalid SID and class values into AVC checks.
Use selinux_sock() instead of accessing sk->sk_security directly. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Limit NVMe request size to 2 MiB
The HBA firmware reports NVMe MDTS values based on the underlying drive
capability. However, because the driver allocates a fixed 4K buffer for
the PRP list, accommodating at most 512 entries, the driver supports a
maximum I/O transfer size of 2 MiB.
Limit max_hw_sectors to the smaller of the reported MDTS and the 2 MiB
driver limit to prevent issuing oversized I/O that may lead to a kernel
oops. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Hold eventfs_mutex and SRCU when remount walks events
Commit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the
events descriptor") had eventfs_set_attrs() recurse through ei->children
on remount. The walk only holds the rcu_read_lock() taken by
tracefs_apply_options() over tracefs_inodes, which is wrong:
- list_for_each_entry over ei->children races with the list_del_rcu()
in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as
d2603279c7d6.
- eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...).
rcu_read_lock() does not extend an SRCU grace period, so ti->private
can be reclaimed under the walk.
- The writes to ei->attr race with eventfs_set_attr(), which holds
eventfs_mutex.
Reproducer:
while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done &
while :; do
echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events
echo > /sys/kernel/tracing/kprobe_events
done
Wrap the events portion of tracefs_apply_options() in
eventfs_remount_lock()/_unlock() that take eventfs_mutex and
srcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so the
nested rcu_read_lock() is fine; lockdep_assert_held() pins the contract.
Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU. |
| In the Linux kernel, the following vulnerability has been resolved:
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: validate SVM ioctl nattr against buffer size
Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.
(cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: fix unclocked access on unbind
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: Prevent OOB reads when parsing IB
Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the
bounds checks. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject new tp_meter sessions during teardown
Prevent tp_meter from starting new sender or receiver sessions after
mesh_state has left BATADV_MESH_ACTIVE. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop tp_meter sessions during mesh teardown
TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.
A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues. |
