| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: validate split-point offset in indx_insert_into_buffer
indx_insert_into_buffer() computes
used = used1 - to_copy - sp_size;
memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off));
where sp and sp_size come from hdr_find_split(). hdr_find_split()
walks entries by le16_to_cpu(e->size) without validating that each
step stays within hdr->used or that the size field is at least
sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper,
only validates header-level fields (used, total, de_off) and does
not walk per-entry sizes.
A crafted NTFS image whose leaf INDEX_HDR reports used == total but
contains one interior NTFS_DE with size = 0xFFF0 therefore passes
validation, descends to indx_insert_into_buffer() through the
ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split()
return an sp whose sp_size (0xFFF0) greatly exceeds the remaining
bytes in the buffer. The u32 subtraction underflows and the memmove
count becomes a near-4-GiB value, producing an out-of-bounds kernel
write that corrupts adjacent allocations and panics the kernel.
Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a
single 'touch' inside the mounted directory; crash site resolves to
fs/ntfs3/index.c at the memmove. Trigger requires only local mount
of an attacker-supplied filesystem image (USB, loopback, or removable
media auto-mount).
Reject the split whenever the chosen sp plus its declared size
already extends past hdr1->used. This is the minimal fix; it
preserves the existing hdr_find_split() contract and relies on the
same out: cleanup path as the pre-existing error returns.
A prior OOB read in the very same indx_insert_into_buffer() memmove
was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in
indx_insert_into_buffer") by tightening hdr_find_e(), but that fix
does not cover the split-point size field path addressed here: sp is
returned by hdr_find_split(), not hdr_find_e(), and the underflow is
driven by sp->size rather than hdr->used exceeding hdr->total. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in fallocate
ntfs_attr_fallocate() allocates holes and delayed allocations inside
initialized size by looking up the current runlist element under
ni->runlist.lock. The returned struct runlist_element is only a borrowed
pointer into ni->runlist.rl. A writer can replace and free that array
after the read lock is dropped, so later reads of rl->lcn, rl->length and
rl->vcn can touch freed memory.
The buggy scenario involves two paths, with each column showing the order
within that path:
ntfs_attr_fallocate():
1. Take ni->runlist.lock for read.
2. Get rl from ntfs_attr_find_vcn_nolock().
3. Drop ni->runlist.lock.
4. Read rl->lcn, rl->length and rl->vcn.
mmap page_mkwrite:
1. Enter ntfs_filemap_page_mkwrite().
2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster().
3. Merge allocation state with ntfs_runlists_merge().
4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_attr_fallocate+0xbb8/0xd00
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_attr_fallocate+0xbb8/0xd00
kasan_report+0xe0/0x110
? ntfs_attr_fallocate+0xbb8/0xd00
ntfs_attr_fallocate+0xbb8/0xd00
? lock_acquire+0x2b8/0x2f0
? __pfx_ntfs_attr_fallocate+0x10/0x10
? 0xffffffffc0000095
? down_write+0x10d/0x1e0
ntfs_fallocate+0x5c9/0x1d00
? __pfx_ntfs_fallocate+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? selinux_file_permission+0x3a7/0x510
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
? do_syscall_64+0x81/0x6a0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 410:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3f/0x110
ntfs_runlists_merge+0xaa3/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
ntfs_attr_fallocate+0x53f/0xd00
ntfs_fallocate+0x5c9/0x1d00
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 424:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
ntfs_rl_realloc+0x6f/0x110
ntfs_runlists_merge+0x7b1/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
__ntfs_write_iomap_begin+0x8cd/0x2280
iomap_iter+0x6de/0x11e0
iomap_page_mkwrite+0x391/0x650
ntfs_filemap_page_mkwrite+0x1ac/0x400
do_page_mkwrite+0x15c/0x280
__handle_mm_fault+0xd6d/0x1ca0
handle_mm_fault+0x19c/0x470
do_user_addr_fault+0x23b/0x9c0
exc_page_fault+0x5c/0xc0
asm_exc_page_fault+0x26/0x30
Fix this by copying the needed runlist fields while the read lock is still
held and using only those scalar snapshots after unlocking.
After the snapshot, ntfs_attr_map_cluster() can also find that the range
is already mapped and return balloc=false. Only call ntfs_dio_zero_range()
when new clusters were allocated, matching the write iomap path and
preserving the zero-newly-allocated-holes behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
In the unregister path we use __in_uprobe_trampoline check with
current->mm for the VMA lookup, which is wrong, because we are
in the tracer context, not the traced process.
Add mm_struct pointer argument to __in_uprobe_trampoline and
changing related callers to pass proper mm_struct pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
Free the UAR index returned by the hardware. |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. |
| Dell ObjectScale, versions prior to 4.3.0.1, contain(s) a Path Traversal vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering. |
| websocket-driver is a WebSocket protocol handler with pluggable I/O. Prior to 0.8.2, WebSocket::Driver.server() passes a malformed Host header to URI.parse in lib/websocket/http/request.rb without catching URI::InvalidURIError, allowing a remote client to crash a TCP-backed WebSocket server when the application does not catch the error from parse(). This issue is fixed in version 0.8.2. |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns.
When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress.
The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| The WNC-M14A2A LTE-M modem driver mishandles unsolicited %NOTIFYEV: events in on_cmd_socknotifyev() (drivers/modem/vendor_standalone/wncm14a2a.c). The response line is linearized into a fixed 40-byte stack buffer via net_buf_linearize(), which caps the copy at 39 bytes and returns out_len <= 39. The two quote-delimiter scanning loops, however, were bounded by len — the full CR/LF-delimited frame length returned by net_buf_findcrlf() — rather than by out_len.
When a %NOTIFYEV: line longer than 39 bytes contains no " within the linearized region, the loop indices p1/p2 walk past value[39] and read adjacent stack memory until a stray quote byte is found or the index reaches len. The over-read string is then passed to strncmp()/atoi()/LOG_*, and if a quote byte is found out of bounds the subsequent value[p2] = '\0' performs a single-NUL out-of-bounds stack write at an attacker-influenced offset.
The %NOTIFYEV: payload carries network-derived content (LTIME network time, SIB1 base-station system information, CSPS/RRCSTATE), so a rogue cellular base station, a malicious or compromised modem module, or RF manipulation that induces an over-long notify line reaches the defect without any application interaction; the handler runs automatically on the unsolicited event in the modem RX thread.
The impact is out-of-bounds stack disclosure (into logs and parsing) and stack corruption that can crash the modem RX thread (denial of service). The write offset is only weakly controlled, so memory-safe code execution is not demonstrated. The fix bounds both scanning loops by out_len, keeping all accesses within the linearized buffer. |
| TLS hostname verification issue in Apache Ranger Client Code in versions <= 2.8.0.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| Improper Privilege Management in Zoom Rooms for Windows before version 7.1.0 may allow an authenticated user to conduct an escalation of privilege via local access. |
| IBM Db2 12.1.5 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow a local attacker to cause a denial of service due to a memory leak. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 Reverse Proxy in certain configurations may provide weaker than expected cryptographic validation of user supplied data. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix error handling in pdsc_devcmd_wait
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery. |
| Path Traversal and Unrestricted File Upload exists in the Ninja Forms plugin before 3.0.23 for WordPress (when the Uploads add-on is activated). This allows an attacker to traverse the file system to access files and execute code via the includes/fields/upload.php (aka upload/submit page) name and tmp_name parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-mapping: move dma_map_resource() sanity check into debug code
dma_map_resource() uses pfn_valid() to ensure the range is not RAM.
However, pfn_valid() only checks for availability of the memory map for
a PFN but it does not ensure that the PFN is actually backed by RAM. On
ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that
share a section with RAM will falsely trigger the WARN_ON_ONCE and cause
dma_map_resource() to return DMA_MAPPING_ERROR.
This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because
the SPI FIFO register (0xfe204004) falls in the same sparsemem section
as the end of RAM (0xf8000000-0xfbffffff), both in section 31
(0xf8000000-0xffffffff).
Move the sanity check from dma_map_resource() into debug_dma_map_phys()
and replace the unreliable pfn_valid() with pfn_valid() &&
!PageReserved(), which correctly identifies actual usable RAM without
false positives for MMIO regions that happen to have struct pages.
Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check
applies equally to both APIs. Any non-reserved page represents kernel
memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost
certainly wrong and risks breaking coherency on non-coherent platforms.
ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have
PageReserved set, so they will not trigger a false positive.
The check no longer blocks the mapping and uses err_printk() to
integrate with dma-debug filtering. |
| Scriban before 6.6.0 contains an infinite recursion vulnerability in object rendering when the ObjectRecursionLimit property defaults to unlimited. Attackers can supply circular reference objects to the template context, exhausting stack space and triggering an uncatchable StackOverflowException that terminates the hosting process. |
