| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Opal is OBiBa’s core database application for biobanks or epidemiological studies. Prior to version 5.1.1, the protections against cross-site request forgery (CSRF) were insufficient application-wide. The referrer header is checked, and if it is invalid, the server returns 403. However, the referrer header can be dropped from CSRF requests using `<meta name="referrer" content="never">`, effectively bypassing this protection. Version 5.1.1 contains a patch for the issue. |
| ToolHive is a utility designed to simplify the deployment and management of Model Context Protocol (MCP) servers. Due to the ordering of code used to start an MCP server container, versions of ToolHive prior to 0.0.33 inadvertently store secrets in the run config files which are used to restart stopped containers. This means that an attacker who has access to the home folder of the user who starts the MCP server can read secrets without needing access to the secrets store itself. This only applies to secrets which were used in containers whose run configs exist at a point in time - other secrets remaining inaccessible. ToolHive 0.0.33 fixes the issue. Some workarounds are available. Stop and delete any running MCP servers, or manually remove any runconfigs from `$HOME/Library/Application Support/toolhive/runconfigs/` (macOS) or `$HOME/.state/toolhive/runconfigs/` (Linux). |
| OS command injection vulnerability in the specific service exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, an arbitrary OS command may be executed by a remote attacker who can log in to the product. |
| Auth0-PHP provides the PHP SDK for Auth0 Authentication and Management APIs. Starting in version 8.0.0-BETA1 and prior to version 8.14.0, session cookies of applications using the Auth0-PHP SDK configured with CookieStore have authentication tags that can be brute forced, which may result in unauthorized access. Certain pre-conditions are required to be vulnerable to this issue: Applications using the Auth0-PHP SDK, or the Auth0/symfony, Auth0/laravel-auth0, and Auth0/wordpress SDKs that rely on the Auth0-PHP SDK; and session storage configured with CookieStore. Upgrade Auth0/Auth0-PHP to v8.14.0 to receive a patch. As an additional precautionary measure, rotating cookie encryption keys is recommended. Note that once updated, any previous session cookies will be rejected. |
| The Episerver Content Management System (CMS) by Optimizely was affected by multiple Stored Cross-Site Scripting (XSS) vulnerabilities. This allowed an authenticated attacker to execute malicious JavaScript code in the victim's browser.
ContentReference properties, which could be used in the "Edit" section of the CMS, offered an upload functionality for documents. These documents could later be used as displayed content on the page. It was possible to upload SVG files that include malicious JavaScript code that would be executed if a user visited the direct URL of the preview image. Attackers needed at least the role "WebEditor" in order to exploit this issue.
Affected products: Version 11.X: EPiServer.CMS.Core (<11.21.4) with EPiServer.CMS.UI (<11.37.5), Version 12.X: EPiServer.CMS.Core (<12.22.1) with EPiServer.CMS.UI (<11.37.3) |
| HAX open-apis provides microservice apis for HAX webcomponents repo that are shared infrastructure calls. An unauthenticated information disclosure vulnerability exists in the Penn State University deployment of the HAX content management system via the `haxPsuUsage` API endpoint, related to a flat present in open-apis versions up to and including 10.0.2. This allows any remote unauthenticated user to retrieve a full list of PSU websites hosted on HAX CMS. When chained with other authorization issues (e.g., HAX-3), this could assist in targeted attacks such as unauthorized content modification or deletion. Commit 06c2e1fbb7131a8fe66aa0600f38dcacae6b7ac7 patches the vulnerability. |
| The Episerver Content Management System (CMS) by Optimizely was affected by multiple Stored Cross-Site Scripting (XSS) vulnerabilities. This allowed an authenticated attacker to execute malicious JavaScript code in the victim's browser.
RTE properties (text fields), which could be used in the "Edit" section of the CMS,
allowed the input of arbitrary text. It was possible to input malicious JavaScript
code in these properties that would be executed if a user visits the previewed
page. Attackers needed at least the role "WebEditor" in order to exploit this issue.
Affected products: Version 11.X: EPiServer.CMS.Core (<11.21.4) with EPiServer.CMS.UI (<11.37.5), Version 12.X: EPiServer.CMS.Core (<12.22.1) with EPiServer.CMS.UI (<11.37.3) |
| An unauthenticated remote attacker can gain limited information of the PLC network but the user management of the PLCs prevents the actual access to the PLCs. |
| The WatchGuard Mobile VPN with SSL Client on Windows does not properly configure directory permissions when installed in a non-default directory. This could allow an authenticated local attacker to escalate to SYSTEM privileges on a vulnerable system.
This issue affects Mobile VPN with SSL Client: from 11.0 through 12.11. |
| MSI Center before 2.0.52.0 has Missing PE Signature Validation. |
| The WatchGuard Terminal Services Agent on Windows does not properly configure directory permissions when installed in a non-default directory. This could allow an authenticated local attacker to escalate to SYSTEM privileges on a vulnerable system.
This issue affects Terminal Services Agent: from 12.0 through 12.10. |
| In the Linux kernel, the following vulnerability has been resolved:
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| An XSS issue was discovered in the Bootstrap Lite theme before 1.x-1.4.5 for Backdrop CMS. It doesn't sufficiently sanitize certain class names. |
| From the VSPC management agent machine, under condition that the management agent is authorized on the server, it is possible to perform Remote Code Execution (RCE) on the VSPC server machine. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the helper function is valid in get_helper_proto
kernel test robot reported verifier bug [1] where the helper func
pointer could be NULL due to disabled config option.
As Alexei suggested we could check on that in get_helper_proto
directly. Marking tail_call helper func with BPF_PTR_POISON,
because it is unused by design.
[1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com |
| An issue was discovered in Stormshield Network Security (SNS) 4.3.x before 4.3.35. If multicast streams are enabled on different interfaces, it may be possible to interrupt multicast traffic on some of these interfaces. That could result in a denial of the multicast routing service on the firewall. |
| Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability that is present starting in version 1.4.4-lts.1 and prior to version 2.0.1 allows an attacker to trigger a Denial of Service (DoS) by sending an upload file request with an empty string field name. This request causes an unhandled exception, leading to a crash of the process. Users should upgrade to `2.0.1` to receive a patch. No known workarounds are available. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: check for stable address space before operating on the VMA
It is possible to hit a zero entry while traversing the vmas in unuse_mm()
called from swapoff path and accessing it causes the OOPS:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000446--> Loading the memory from offset 0x40 on the
XA_ZERO_ENTRY as address.
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
The issue is manifested from the below race between the fork() on a
process and swapoff:
fork(dup_mmap()) swapoff(unuse_mm)
--------------- -----------------
1) Identical mtree is built using
__mt_dup().
2) copy_pte_range()-->
copy_nonpresent_pte():
The dst mm is added into the
mmlist to be visible to the
swapoff operation.
3) Fatal signal is sent to the parent
process(which is the current during the
fork) thus skip the duplication of the
vmas and mark the vma range with
XA_ZERO_ENTRY as a marker for this process
that helps during exit_mmap().
4) swapoff is tried on the
'mm' added to the 'mmlist' as
part of the 2.
5) unuse_mm(), that iterates
through the vma's of this 'mm'
will hit the non-NULL zero entry
and operating on this zero entry
as a vma is resulting into the
oops.
The proper fix would be around not exposing this partially-valid tree to
others when droping the mmap lock, which is being solved with [1]. A
simpler solution would be checking for MMF_UNSTABLE, as it is set if
mm_struct is not fully initialized in dup_mmap().
Thanks to Liam/Lorenzo/David for all the suggestions in fixing this
issue. |
| A vulnerability classified as critical was found in Casdoor up to 1.811.0. This vulnerability affects the function HandleScim of the file controllers/scim.go of the component SCIM User Creation Endpoint. The manipulation leads to authorization bypass. The attack can be initiated remotely. Upgrading to version 1.812.0 is able to address this issue. The name of the patch is 3d12ac8dc2282369296c3386815c00a06c6a92fe. It is recommended to upgrade the affected component. |
| Quick Agent V3 and Quick Agent V2 contain an issue with improper limitation of a pathname to a restricted directory ('Path Traversal'). If exploited, an arbitrary file in the affected product may be obtained by a remote attacker who can log in to the product. |
