| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Input Validation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker, sending a specific genuine BGP packet in an already established BGP session to reset only that session causing a Denial of Service (DoS).
An attacker repeatedly sending the packet will sustain the Denial of Service (DoS).This issue affects Junos OS:
* 25.2 versions before 25.2R2
This issue doesn't not affected Junos OS versions before 25.2R1.
This issue affects Junos OS Evolved:
* 25.2-EVO versions before 25.2R2-EVO
This issue doesn't not affected Junos OS Evolved versions before 25.2R1-EVO.
eBGP and iBGP are affected.
IPv4 and IPv6 are affected. |
| A Key Exchange without Entity Authentication vulnerability in the SSH implementation of Juniper Networks Apstra allows a unauthenticated, MITM
attacker to impersonate managed devices.
Due to insufficient SSH host key validation an attacker can perform a machine-in-the-middle attack on the SSH connections from Apstra to managed devices, enabling an attacker to impersonate a managed device and capture user credentials.
This issue affects all versions of Apstra before 6.1.1. |
| A Weak Password Requirements vulnerability in the password management function of Juniper Networks CTP OS might allow an unauthenticated, network-based attacker to exploit weak passwords of local accounts and potentially take full control of the device.
The password management menu enables the administrator to set password complexity requirements, but these settings are not saved. The issue can be verified with the menu option "Show password requirements". Failure to enforce the intended requirements can lead to weak passwords being used, which significantly increases the likelihood that an attacker can guess these and subsequently attain unauthorized access.
This issue affects CTP OS versions 9.2R1 and 9.2R2. |
| A Function Call With Incorrect Argument Type vulnerability in the sensor interface of Juniper Networks Junos OS Evolved on PTX Series allows a network-based, authenticated attacker with low privileges to cause a complete Denial of Service (DoS).
If colored SRTE policy tunnels are provisioned via PCEP, and gRPC is used to monitor traffic in these tunnels, evo-aftmand crashes and doesn't restart which leads to a complete and persistent service impact. The system has to be manually restarted to recover. The issue is seen only when the Originator ASN field in PCEP contains a value larger than 65,535 (32-bit ASN). The issue is not reproducible when SRTE policy tunnels are statically configured.
This issue affects Junos OS Evolved on PTX Series:
* all versions before 22.4R3-S9-EVO,
* 23.2 versions before 23.2R2-S6-EVO,
* 23.4 versions before 23.4R2-S7-EVO,
* 24.2 versions before 24.2R2-S4-EVO,
* 24.4 versions before 24.4R2-S2-EVO,
* 25.2 versions before 25.2R1-S2-EVO, 25.2R2-EVO. |
| A Use of Default Password vulnerability in the Juniper Networks
Support Insights (JSI)
Virtual Lightweight Collector (vLWC) allows an unauthenticated, network-based attacker to take full control of the device.
vLWC software images ship with an initial password for a high privileged account. A change of this password is not enforced during the provisioning of the software, which can make full access to the system by unauthorized actors possible.This issue affects all versions of vLWC before 3.0.94. |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on MX Series allows a local, authenticated user with low privileges to execute specific commands which will lead to a complete compromise of managed devices.
Any user logged in, without requiring specific privileges, can issue 'request csds' CLI operational commands. These commands are only meant to be executed by high privileged or users designated for Juniper Device Manager (JDM) / Connected Security Distributed Services (CSDS) operations as they will impact all aspects of the devices managed via the respective MX.
This issue affects Junos OS on MX Series:
* 24.4 releases before 24.4R2-S3,
* 25.2 releases before 25.2R2.
This issue does not affect Junos OS releases before 24.4. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis control daemon (chassisd) of Juniper Networks Junos OS on SRX1500, SRX4100, SRX4200 and SRX4600 allows a local attacker with low privileges to cause a complete Denial of Service (DoS).
When a specific 'show chassis' CLI command is executed, chassisd crashes and restarts which causes a momentary impact to all traffic until all modules are online again.
This issue affects Junos OS on SRX1500, SRX4100, SRX4200 and SRX4600:
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2,
* 25.2 versions before 25.2R1-S1, 25.2R2. |
| An OS Command Injection vulnerability in the CLI processing of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker executing specific, crafted CLI commands to inject arbitrary shell commands as root, leading to a complete compromise of the system.
Certain 'set system' commands, when executed with crafted arguments, are not properly sanitized, allowing for arbitrary shell injection. These shell commands are executed as root, potentially allowing for complete control of the vulnerable system.
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S7,
* from 24.2 before 24.2R2-S2,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-S7-EVO,
* from 24.2 before 24.2R2-S2-EVO,
* from 24.4 before 24.4R2-EVO,
* from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. |
| PraisonAI is a multi-agent teams system. Prior to 4.5.128, PraisonAI treats remotely fetched template files as trusted executable code without integrity verification, origin validation, or user confirmation, enabling supply chain attacks through malicious templates. This vulnerability is fixed in 4.5.128. |
| A vulnerability was determined in D-Link DIR-605L 2.13B01. This issue affects the function formSetDDNS of the file /goform/formSetDDNS of the component POST Request Handler. Executing a manipulation of the argument curTime can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was identified in D-Link DIR-605L 2.13B01. Impacted is the function formSetLog of the file /goform/formSetLog of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| When restoring a session from cache, a pointer from the serialized session data is used in a free operation without validation. An attacker who can poison the session cache could trigger an arbitrary free. Exploitation requires the ability to inject a crafted session into the cache and for the application to call specific session restore APIs. |
| A weakness has been identified in Zod jsVideoUrlParser up to 0.5.1. The impacted element is the function getTime in the library lib/util.js. This manipulation of the argument timestamp causes inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A padding oracle exists in wolfSSL's PKCS7 CBC decryption that could allow an attacker to recover plaintext through repeated decryption queries with modified ciphertext. In previous versions of wolfSSL the interior padding bytes are not validated. |
| In TLSX_EchChangeSNI, the ctx->extensions branch set extensions unconditionally even when TLSX_Find returned NULL. This caused TLSX_UseSNI to attach the attacker-controlled publicName to the shared WOLFSSL_CTX when no inner SNI was configured. TLSX_EchRestoreSNI then failed to clean it up because its removal was gated on serverNameX != NULL. The inner ClientHello was sized before the pollution but written after it, causing TLSX_SNI_Write to memcpy 255 bytes past the allocation boundary. |
| A stack buffer overflow exists in wolfSSL's PKCS7 implementation in the wc_PKCS7_DecryptOri() function in wolfcrypt/src/pkcs7.c. When processing a CMS EnvelopedData message containing an OtherRecipientInfo (ORI) recipient, the function copies an ASN.1-parsed OID into a fixed 32-byte stack buffer (oriOID[MAX_OID_SZ]) via XMEMCPY without first validating that the parsed OID length does not exceed MAX_OID_SZ. A crafted CMS EnvelopedData message with an ORI recipient containing an OID longer than 32 bytes triggers a stack buffer overflow. Exploitation requires the library to be built with --enable-pkcs7 (disabled by default) and the application to have registered an ORI decrypt callback via wc_PKCS7_SetOriDecryptCb(). |
| Smart Slider 3 Pro version 3.5.1.35 for WordPress and Joomla contains a multi-stage remote access toolkit injected through a compromised update system that allows unauthenticated attackers to execute arbitrary code and commands. Attackers can trigger pre-authentication remote shell execution via HTTP headers, establish authenticated backdoors accepting arbitrary PHP code or OS commands, create hidden administrator accounts, exfiltrate credentials and access keys, and maintain persistence through multiple injection points including must-use plugins and core file modifications. |
| A vulnerability was detected in Tenda F451 1.0.0.7. This impacts the function formWrlsafeset of the file /goform/AdvSetWrlsafeset. Performing a manipulation of the argument mit_ssid results in stack-based buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in Tenda F451 1.0.0.7. Affected is the function fromRouteStatic of the file /goform/RouteStatic. Executing a manipulation of the argument page can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| A vulnerability was found in Tenda F451 1.0.0.7. Affected by this issue is the function formWrlExtraSet of the file /goform/WrlExtraSet. The manipulation of the argument GO results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. |
