| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/AER: Fix NULL pointer access by aer_info
The kzalloc(GFP_KERNEL) may return NULL, so all accesses to aer_info->xxx
will result in kernel panic. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix buffer validation by including null terminator size in EA length
The smb2_set_ea function, which handles Extended Attributes (EA),
was performing buffer validation checks that incorrectly omitted the size
of the null terminating character (+1 byte) for EA Name.
This patch fixes the issue by explicitly adding '+ 1' to EaNameLength where
the null terminator is expected to be present in the buffer, ensuring
the validation accurately reflects the total required buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: fix use-after-free caused by uec->work
The delayed work uec->work is scheduled in gaokun_ucsi_probe()
but never properly canceled in gaokun_ucsi_remove(). This creates
use-after-free scenarios where the ucsi and gaokun_ucsi structure
are freed after ucsi_destroy() completes execution, while the
gaokun_ucsi_register_worker() might be either currently executing
or still pending in the work queue. The already-freed gaokun_ucsi
or ucsi structure may then be accessed.
Furthermore, the race window is 3 seconds, which is sufficiently
long to make this bug easily reproducible. The following is the
trace captured by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630
Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0
...
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x114/0x580
kasan_report+0xa4/0xf0
__asan_report_store8_noabort+0x20/0x2c
__run_timers+0x5ec/0x630
run_timer_softirq+0xe8/0x1cc
handle_softirqs+0x294/0x720
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x30/0x48
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x27c/0x364
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x40/0x60
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
arch_local_irq_enable+0x4/0x8 (P)
do_idle+0x334/0x458
cpu_startup_entry+0x60/0x70
rest_init+0x158/0x174
start_kernel+0x2f8/0x394
__primary_switched+0x8c/0x94
Allocated by task 72 on cpu 0 at 27.510341s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
kasan_save_alloc_info+0x40/0x54
__kasan_kmalloc+0xa0/0xb8
__kmalloc_node_track_caller_noprof+0x1c0/0x588
devm_kmalloc+0x7c/0x1c8
gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8
really_probe+0x17c/0x5b8
__driver_probe_device+0x158/0x2c4
driver_probe_device+0x10c/0x264
__device_attach_driver+0x168/0x2d0
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x368
device_initial_probe+0x14/0x20
bus_probe_device+0x120/0x150
device_add+0xb3c/0x10fc
__auxiliary_device_add+0x88/0x130
...
Freed by task 73 on cpu 1 at 28.910627s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
__kasan_save_free_info+0x4c/0x74
__kasan_slab_free+0x60/0x8c
kfree+0xd4/0x410
devres_release_all+0x140/0x1f0
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x344/0x460
device_release_driver+0x18/0x24
bus_remove_device+0x198/0x274
device_del+0x310/0xa84
...
The buggy address belongs to the object at ffff00000ec28c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 200 bytes inside of
freed 512-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff)
page_type: f5(slab)
raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
================================================================
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds check on Transfer Tag
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
vfat: fix missing sb_min_blocksize() return value checks
When emulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, but without format, a kernel panic
was triggered during the early boot stage while attempting to mount a
vfat filesystem.
[95553.682035] EXT4-fs (nvme0n1): unable to set blocksize
[95553.684326] EXT4-fs (nvme0n1): unable to set blocksize
[95553.686501] EXT4-fs (nvme0n1): unable to set blocksize
[95553.696448] ISOFS: unsupported/invalid hardware sector size 8192
[95553.697117] ------------[ cut here ]------------
[95553.697567] kernel BUG at fs/buffer.c:1582!
[95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary)
[95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0
[95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f
[95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246
[95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001
[95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000
[95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000
[95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000
[95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000
[95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0
[95553.708439] PKRU: 55555554
[95553.708734] Call Trace:
[95553.709015] <TASK>
[95553.709266] __getblk_slow+0xd2/0x230
[95553.709641] ? find_get_block_common+0x8b/0x530
[95553.710084] bdev_getblk+0x77/0xa0
[95553.710449] __bread_gfp+0x22/0x140
[95553.710810] fat_fill_super+0x23a/0xfc0
[95553.711216] ? __pfx_setup+0x10/0x10
[95553.711580] ? __pfx_vfat_fill_super+0x10/0x10
[95553.712014] vfat_fill_super+0x15/0x30
[95553.712401] get_tree_bdev_flags+0x141/0x1e0
[95553.712817] get_tree_bdev+0x10/0x20
[95553.713177] vfat_get_tree+0x15/0x20
[95553.713550] vfs_get_tree+0x2a/0x100
[95553.713910] vfs_cmd_create+0x62/0xf0
[95553.714273] __do_sys_fsconfig+0x4e7/0x660
[95553.714669] __x64_sys_fsconfig+0x20/0x40
[95553.715062] x64_sys_call+0x21ee/0x26a0
[95553.715453] do_syscall_64+0x80/0x670
[95553.715816] ? __fs_parse+0x65/0x1e0
[95553.716172] ? fat_parse_param+0x103/0x4b0
[95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0
[95553.717034] ? __do_sys_fsconfig+0x3d9/0x660
[95553.717548] ? __x64_sys_fsconfig+0x20/0x40
[95553.717957] ? x64_sys_call+0x21ee/0x26a0
[95553.718360] ? do_syscall_64+0xb8/0x670
[95553.718734] ? __x64_sys_fsconfig+0x20/0x40
[95553.719141] ? x64_sys_call+0x21ee/0x26a0
[95553.719545] ? do_syscall_64+0xb8/0x670
[95553.719922] ? x64_sys_call+0x1405/0x26a0
[95553.720317] ? do_syscall_64+0xb8/0x670
[95553.720702] ? __x64_sys_close+0x3e/0x90
[95553.721080] ? x64_sys_call+0x1b5e/0x26a0
[95553.721478] ? do_syscall_64+0xb8/0x670
[95553.721841] ? irqentry_exit+0x43/0x50
[95553.722211] ? exc_page_fault+0x90/0x1b0
[95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[95553.723166] RIP: 0033:0x72ee774f3afe
[95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48
[95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af
[95553.725892] RAX: ffffffffffffffda RBX:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add check for cstate
As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.
Patchwork: https://patchwork.freedesktop.org/patch/514163/ |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
[mani: reworded subject and description] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_eem: Fix memory leak in eem_unwrap
The existing code did not handle the failure case of usb_ep_queue in the
command path, potentially leading to memory leaks.
Improve error handling to free all allocated resources on usb_ep_queue
failure. This patch continues to use goto logic for error handling, as the
existing error handling is complex and not easily adaptable to auto-cleanup
helpers.
kmemleak results:
unreferenced object 0xffffff895a512300 (size 240):
backtrace:
slab_post_alloc_hook+0xbc/0x3a4
kmem_cache_alloc+0x1b4/0x358
skb_clone+0x90/0xd8
eem_unwrap+0x1cc/0x36c
unreferenced object 0xffffff8a157f4000 (size 256):
backtrace:
slab_post_alloc_hook+0xbc/0x3a4
__kmem_cache_alloc_node+0x1b4/0x2dc
kmalloc_trace+0x48/0x140
dwc3_gadget_ep_alloc_request+0x58/0x11c
usb_ep_alloc_request+0x40/0xe4
eem_unwrap+0x204/0x36c
unreferenced object 0xffffff8aadbaac00 (size 128):
backtrace:
slab_post_alloc_hook+0xbc/0x3a4
__kmem_cache_alloc_node+0x1b4/0x2dc
__kmalloc+0x64/0x1a8
eem_unwrap+0x218/0x36c
unreferenced object 0xffffff89ccef3500 (size 64):
backtrace:
slab_post_alloc_hook+0xbc/0x3a4
__kmem_cache_alloc_node+0x1b4/0x2dc
kmalloc_trace+0x48/0x140
eem_unwrap+0x238/0x36c |
| In the Linux kernel, the following vulnerability has been resolved:
amd/amdkfd: enhance kfd process check in switch partition
current switch partition only check if kfd_processes_table is empty.
kfd_prcesses_table entry is deleted in kfd_process_notifier_release, but
kfd_process tear down is in kfd_process_wq_release.
consider two processes:
Process A (workqueue) -> kfd_process_wq_release -> Access kfd_node member
Process B switch partition -> amdgpu_xcp_pre_partition_switch -> amdgpu_amdkfd_device_fini_sw
-> kfd_node tear down.
Process A and B may trigger a race as shown in dmesg log.
This patch is to resolve the race by adding an atomic kfd_process counter
kfd_processes_count, it increment as create kfd process, decrement as
finish kfd_process_wq_release.
v2: Put kfd_processes_count per kfd_dev, move decrement to kfd_process_destroy_pdds
and bug fix. (Philip Yang)
[3966658.307702] divide error: 0000 [#1] SMP NOPTI
[3966658.350818] i10nm_edac
[3966658.356318] CPU: 124 PID: 38435 Comm: kworker/124:0 Kdump: loaded Tainted
[3966658.356890] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu]
[3966658.362839] nfit
[3966658.366457] RIP: 0010:kfd_get_num_sdma_engines+0x17/0x40 [amdgpu]
[3966658.366460] Code: 00 00 e9 ac 81 02 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 48 8b 4f 08 48 8b b7 00 01 00 00 8b 81 58 26 03 00 99 <f7> be b8 01 00 00 80 b9 70 2e 00 00 00 74 0b 83 f8 02 ba 02 00 00
[3966658.380967] x86_pkg_temp_thermal
[3966658.391529] RSP: 0018:ffffc900a0edfdd8 EFLAGS: 00010246
[3966658.391531] RAX: 0000000000000008 RBX: ffff8974e593b800 RCX: ffff888645900000
[3966658.391531] RDX: 0000000000000000 RSI: ffff888129154400 RDI: ffff888129151c00
[3966658.391532] RBP: ffff8883ad79d400 R08: 0000000000000000 R09: ffff8890d2750af4
[3966658.391532] R10: 0000000000000018 R11: 0000000000000018 R12: 0000000000000000
[3966658.391533] R13: ffff8883ad79d400 R14: ffffe87ff662ba00 R15: ffff8974e593b800
[3966658.391533] FS: 0000000000000000(0000) GS:ffff88fe7f600000(0000) knlGS:0000000000000000
[3966658.391534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3966658.391534] CR2: 0000000000d71000 CR3: 000000dd0e970004 CR4: 0000000002770ee0
[3966658.391535] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[3966658.391535] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[3966658.391536] PKRU: 55555554
[3966658.391536] Call Trace:
[3966658.391674] deallocate_sdma_queue+0x38/0xa0 [amdgpu]
[3966658.391762] process_termination_cpsch+0x1ed/0x480 [amdgpu]
[3966658.399754] intel_powerclamp
[3966658.402831] kfd_process_dequeue_from_all_devices+0x5b/0xc0 [amdgpu]
[3966658.402908] kfd_process_wq_release+0x1a/0x1a0 [amdgpu]
[3966658.410516] coretemp
[3966658.434016] process_one_work+0x1ad/0x380
[3966658.434021] worker_thread+0x49/0x310
[3966658.438963] kvm_intel
[3966658.446041] ? process_one_work+0x380/0x380
[3966658.446045] kthread+0x118/0x140
[3966658.446047] ? __kthread_bind_mask+0x60/0x60
[3966658.446050] ret_from_fork+0x1f/0x30
[3966658.446053] Modules linked in: kpatch_20765354(OEK)
[3966658.455310] kvm
[3966658.464534] mptcp_diag xsk_diag raw_diag unix_diag af_packet_diag netlink_diag udp_diag act_pedit act_mirred act_vlan cls_flower kpatch_21951273(OEK) kpatch_18424469(OEK) kpatch_19749756(OEK)
[3966658.473462] idxd_mdev
[3966658.482306] kpatch_17971294(OEK) sch_ingress xt_conntrack amdgpu(OE) amdxcp(OE) amddrm_buddy(OE) amd_sched(OE) amdttm(OE) amdkcl(OE) intel_ifs iptable_mangle tcm_loop target_core_pscsi tcp_diag target_core_file inet_diag target_core_iblock target_core_user target_core_mod coldpgs kpatch_18383292(OEK) ip6table_nat ip6table_filter ip6_tables ip_set_hash_ipportip ip_set_hash_ipportnet ip_set_hash_ipport ip_set_bitmap_port xt_comment iptable_nat nf_nat iptable_filter ip_tables ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sn_core_odd(OE) i40e overlay binfmt_misc tun bonding(OE) aisqos(OE) aisqo
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: avoid having an active sc_timer before freeing sci
Because kthread_stop did not stop sc_task properly and returned -EINTR,
the sc_timer was not properly closed, ultimately causing the problem [1]
reported by syzbot when freeing sci due to the sc_timer not being closed.
Because the thread sc_task main function nilfs_segctor_thread() returns 0
when it succeeds, when the return value of kthread_stop() is not 0 in
nilfs_segctor_destroy(), we believe that it has not properly closed
sc_timer.
We use timer_shutdown_sync() to sync wait for sc_timer to shutdown, and
set the value of sc_task to NULL under the protection of lock
sc_state_lock, so as to avoid the issue caused by sc_timer not being
properly shutdowned.
[1]
ODEBUG: free active (active state 0) object: 00000000dacb411a object type: timer_list hint: nilfs_construction_timeout
Call trace:
nilfs_segctor_destroy fs/nilfs2/segment.c:2811 [inline]
nilfs_detach_log_writer+0x668/0x8cc fs/nilfs2/segment.c:2877
nilfs_put_super+0x4c/0x12c fs/nilfs2/super.c:509 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Cache streams targeting link when performing LT automation
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow
A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.
Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array. Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix potential kgd_mem UAFs
kgd_mem pointers returned by kfd_process_device_translate_handle are
only guaranteed to be valid while p->mutex is held. As soon as the mutex
is unlocked, another thread can free the BO. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix LTP test failures when timestamps are delegated
The utimes01 and utime06 tests fail when delegated timestamps are
enabled, specifically in subtests that modify the atime and mtime
fields using the 'nobody' user ID.
The problem can be reproduced as follow:
# echo "/media *(rw,no_root_squash,sync)" >> /etc/exports
# export -ra
# mount -o rw,nfsvers=4.2 127.0.0.1:/media /tmpdir
# cd /opt/ltp
# ./runltp -d /tmpdir -s utimes01
# ./runltp -d /tmpdir -s utime06
This issue occurs because nfs_setattr does not verify the inode's
UID against the caller's fsuid when delegated timestamps are
permitted for the inode.
This patch adds the UID check and if it does not match then the
request is sent to the server for permission checking. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: flower: fix filter idr initialization
The cited commit moved idr initialization too early in fl_change() which
allows concurrent users to access the filter that is still being
initialized and is in inconsistent state, which, in turn, can cause NULL
pointer dereference [0]. Since there is no obvious way to fix the ordering
without reverting the whole cited commit, alternative approach taken to
first insert NULL pointer into idr in order to allocate the handle but
still cause fl_get() to return NULL and prevent concurrent users from
seeing the filter while providing miss-to-action infrastructure with valid
handle id early in fl_change().
[ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN
[ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5
[ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower]
[ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57
[ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246
[ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900
[ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240
[ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900
[ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738
[ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000
[ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0
[ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 152.453588] Call Trace:
[ 152.454032] <TASK>
[ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0
[ 152.455109] ? sock_sendmsg+0xc5/0x190
[ 152.455689] ? ____sys_sendmsg+0x535/0x6b0
[ 152.456320] ? ___sys_sendmsg+0xeb/0x170
[ 152.456916] ? do_syscall_64+0x3d/0x90
[ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.458321] ? ___sys_sendmsg+0xeb/0x170
[ 152.458958] ? __sys_sendmsg+0xb5/0x140
[ 152.459564] ? do_syscall_64+0x3d/0x90
[ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower]
[ 152.461710] ? _raw_spin_lock+0x7a/0xd0
[ 152.462299] ? _raw_read_lock_irq+0x30/0x30
[ 152.462924] ? nla_put+0x15e/0x1c0
[ 152.463480] fl_dump+0x228/0x650 [cls_flower]
[ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower]
[ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330
[ 152.465592] ? nla_put+0x15e/0x1c0
[ 152.466160] tcf_fill_node+0x515/0x9a0
[ 152.466766] ? tc_setup_offload_action+0xf0/0xf0
[ 152.467463] ? __alloc_skb+0x13c/0x2a0
[ 152.468067] ? __build_skb_around+0x330/0x330
[ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower]
[ 152.469503] tc_del_tfilter+0x718/0x1330
[ 152.470115] ? is_bpf_text_address+0xa/0x20
[ 152.470765] ? tc_ctl_chain+0xee0/0xee0
[ 152.471335] ? __kernel_text_address+0xe/0x30
[ 152.471948] ? unwind_get_return_address+0x56/0xa0
[ 152.472639] ? __thaw_task+0x150/0x150
[ 152.473218] ? arch_stack_walk+0x98/0xf0
[ 152.473839] ? __stack_depot_save+0x35/0x4c0
[ 152.474501] ? stack_trace_save+0x91/0xc0
[ 152.475119] ? security_capable+0x51/0x90
[ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0
[ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.477042]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix softlockup in ftrace_module_enable
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Prevent access to vCPU events before init
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)
Reject the ioctls outright as no sane VMM would call these before
KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been
thrown away by the eventual reset of the vCPU's state. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Ensure XFD state on signal delivery
Sean reported [1] the following splat when running KVM tests:
WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70
Call Trace:
<TASK>
fpu__clear_user_states+0x9c/0x100
arch_do_signal_or_restart+0x142/0x210
exit_to_user_mode_loop+0x55/0x100
do_syscall_64+0x205/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Chao further identified [2] a reproducible scenario involving signal
delivery: a non-AMX task is preempted by an AMX-enabled task which
modifies the XFD MSR.
When the non-AMX task resumes and reloads XSTATE with init values,
a warning is triggered due to a mismatch between fpstate::xfd and the
CPU's current XFD state. fpu__clear_user_states() does not currently
re-synchronize the XFD state after such preemption.
Invoke xfd_update_state() which detects and corrects the mismatch if
there is a dynamic feature.
This also benefits the sigreturn path, as fpu__restore_sig() may call
fpu__clear_user_states() when the sigframe is inaccessible.
[ dhansen: minor changelog munging ] |
