| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential zero beacon interval in beacon tracking
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: pretend special inodes as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix double destroy_workqueue on service rescan PCI path
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"
This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: macsmc: Initialize mutex
Initialize struct apple_smc's mutex in apple_smc_probe(). Using the
mutex uninitialized surprisingly resulted only in occasional NULL
pointer dereferences in apple_smc_read() calls from the probe()
functions of sub devices. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ccs: Avoid possible division by zero
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00). |
| Redis is an in-memory data structure store. In all versions of redis-server with Lua scripting, an authenticated attacker can exploit the master-replica synchronization mechanism to trigger a use-after-free on replicas where replica-read-only is disabled or can be disabled, which may lead to remote code execution. A workaround is to prevent users from executing Lua scripts or avoid using replicas where replica-read-only is disabled. This is patched in version 8.6.3. |
| NanoClaw contains a host/container filesystem boundary vulnerability in outbound attachment handling and outbox cleanup that allows a compromised or prompt-injected container to read files outside the intended outbox directory by supplying crafted messages_out.id and content.files values or creating symlinked outbox files. Attackers can exploit this vulnerability to trigger host-side reads of arbitrary files and in some cases achieve recursive deletion of paths outside the intended cleanup target. |
| Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, the Origin header validation uses Python's re.match() to check incoming origins against the allow_origin_pat configuration value. Because re.match() only anchors at the start of the string and does not require a full match, a pattern intended to match only a trusted domain (e.g., trusted.example.com) will also match any origin that begins with that domain followed by additional characters (e.g., trusted.example.com.evil.com). An attacker who controls such a domain can bypass the CORS origin restriction and make cross-origin requests to the Jupyter Server API from an untrusted site. This issue has been fixed in version 2.18.0. |
| A server-side request forgery (ssrf) vulnerability [CWE-918] vulnerability in Fortinet FortiSOAR PaaS 7.6.4, FortiSOAR PaaS 7.6.0 through 7.6.2, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.4, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to discover services running on local ports via crafted requests. |
| A cleartext transmission of sensitive information vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.1, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to view cleartext password in response for Secure Message Exchange and Radius queries, if configured |
| An improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.3, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated remote attacker to perform a stored cross site scripting (XSS) attack via crafted HTTP Requests. |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ensure that won't go past CPER allocated record
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm: clear cloned request bio pointer when last clone bio completes
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios. |
