| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The CONFIG_USERSPACE syscall verifier z_vrfy_k_poll() in kernel/poll.c allocates a kernel-side copy of the user-supplied k_poll_event[] via z_thread_malloc() and then validates each event's object handle. Before this fix, validation used K_OOPS(K_SYSCALL_OBJ(...)) inline inside the loop, which kills the calling thread without freeing events_copy.
A user thread can pass num_events >= 1 with a forged object handle to leak the allocation; because newly spawned user threads inherit the parent's resource_pool (kernel/thread.c), an attacker spawns sacrificial threads to repeat the leak until the shared kernel heap is exhausted. Once depleted, legitimate kernel allocations from that pool (k_queue alloc nodes, k_msgq buffers, future k_poll calls, etc.) fail, causing a system-level denial of service.
The fix replaces each inline K_OOPS with a conditional goto oops_free so the buffer is freed before the thread is killed. Affects Zephyr releases from v1.12.0 (when k_poll was first exposed to user mode) through v4.4.1. |
| The QUIC transport parameters extension handler in s2n-tls incorrectly uses s2n_alloc instead of s2n_realloc to store the peer's transport parameters. When a TLS 1.3 connection goes through a HelloRetryRequest, the handler is called twice on the same connection. On the second call, s2n_alloc zeroes the existing pointer before allocating new memory, causing the first allocation to be leaked.
This can occur during normal QUIC traffic when a client offers a key share group the server does not prefer. An unauthenticated user can amplify the issue by deliberately forcing HelloRetryRequests, causing up to approximately 64 KB of unreachable memory per handshake. Over time, this can lead to increased memory consumption on long-running server processes. The unreachable memory is only reclaimed when the process is restarted.
Only server-side QUIC-enabled deployments are affected. Non-QUIC TLS connections are not affected.
We recommend you upgrade s2n-tls to version v1.7.6 |
| Netty is a network application framework for development of protocol servers and clients. Prior to 4.2.16.Final, Netty's `Http3FrameCodec` buffers incoming data for HTTP/3 reserved frame types up to the wire-specified payload length without limits; `decodeFrame` trusts `payLoadLength`, allowing an attacker to open multiple QUIC streams and send reserved frames with very large payload lengths to cause memory exhaustion and denial of service. This issue is fixed in version 4.2.16.Final. |
| Loop with unreachable exit condition ('infinite loop') in Azure Active Directory allows an unauthorized attacker to deny service over a network. |
| Uncontrolled Resource Consumption (CWE-400) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). A low-privileged authenticated user can send a specially crafted request to a Kibana machine learning feature, causing the server to exhaust available memory and become unavailable to all users. |
| Uncontrolled Resource Consumption (CWE-400) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated attacker with low-privilege access can trigger a denial of service condition in Kibana by sending a specially crafted, oversized request payload. Processing this user-supplied input requires resource-intensive memory allocation that can exhaust the available heap memory in the Kibana process, causing it to crash and become unavailable to all users. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to denial of service via Exponential Data Expansion (CAPEC-197). An authenticated user may submit a specially crafted query to the ES|QL engine that causes exponential CPU consumption during query evaluation. Because the resource exhaustion persists beyond query completion, repeated requests can fully exhaust the available query worker resources, rendering ES|QL queries unavailable until the node is restarted. |
| A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the FreeScout helpdesk application does not enforce rate limiting on the file upload endpoint. Any user can flood the server with upload requests, leading to database overload and potential denial of service for all users. Version 1.8.224 contains a fix. |
| A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. |
| Uncontrolled Resource Consumption vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 9.0.0 through 9.1.13, from 10.0.0 through 10.1.2.
Users are recommended to upgrade to version 9.1.14 or 10.1.3, which fixes the issue. |
| Parsec is a cloud-based application for simple and cryptographically secure file sharing. The application does not sanitize the workspace name, creating a vulnerability if that workspace name is a UNC path. When creating mountpoint in the windows filesystem to mount the workspace of an organization, the application does not sanitize the workspace name. The cause issue if the workspace name evaluate to a UNC path since it's allowed for the name to containt `\` char. If the UNC path is invalid (or the targeted resource is not available) the application become unresponsive otherwise the system will interact with the mounted UNC path allowing the attacker to retrieve to [`NTLM`] hash. |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix posix_acl leak on SETACL decode failure
nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each
call nfs_stream_decode_acl() twice, first for NFS_ACL and then for
NFS_DFACL. Each successful call transfers ownership of a freshly
allocated posix_acl into argp->acl_access or argp->acl_default. If
the first call succeeds but the second fails, the decoder returns
false and argp->acl_access is left dangling.
ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and
ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle.
Both only call fh_put() and have no knowledge of the ACL fields on
argp. The posix_acl_release() pairs sat at the out: labels inside
nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process()
skips pc_func when pc_decode returns false, so that cleanup is
unreachable on decode failure:
svc_process_common()
pc_decode() /* decode_setaclargs: false */
/* pc_func skipped */
pc_release() /* fh_put only -- ACLs leaked */
The orphaned posix_acl is leaked for the lifetime of the server.
Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(),
which release both argp->acl_access and argp->acl_default in addition
to fh_put(), and wiring them as pc_release for their respective SETACL
procedures. pc_release runs on every path svc_process() takes after
decode, including decode failure, so the posix_acl_release() pairs are
removed from the proc functions' out: labels to keep ownership in one
place. This matches the existing release_getacl() pattern used by
the sibling GETACL procedures. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix posix_acl leak and ignored error in nfsd4_create_file
nfsd4_create_file() has two bugs in its ACL handling:
The return value of nfsd4_acl_to_attr() is silently discarded. When
the NFSv4-to-POSIX ACL conversion fails (e.g., -EINVAL for
unsupported ACE types), the file is created without any ACL and the
client receives NFS4_OK. This violates RFC 7530/8881 which require
the server to reject unsupported attributes on CREATE.
When start_creating() fails after ACL attributes have been populated
in attrs (either via nfsd4_acl_to_attr or via ownership transfer from
open->op_dpacl/op_pacl), the function jumps to out_write which skips
nfsd_attrs_free(). The posix_acl allocations are leaked. A client
can trigger this repeatedly with OPEN(CREATE), ACL attributes, and an
invalid filename (e.g., longer than NAME_MAX).
Fix both by capturing the nfsd4_acl_to_attr() return value and by
changing the early error paths to jump to out instead of out_write.
Initialize child to ERR_PTR(-EINVAL) so that end_creating() is safe
to call even if start_creating() was never reached. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race
When find_or_alloc_open_stateowner() encounters an unconfirmed owner, it
calls release_openowner() and sets oo = NULL. Control then falls through
past the `if (oo)` guard -- which would have freed any pre-allocated
`new` -- and unconditionally executes `new = alloc_stateowner(...)`. If
`new` was already allocated on a prior iteration, the pointer is
silently overwritten and the previous allocation (slab object + owner
name buffer) is leaked.
This requires a race: two NFSv4.0 OPEN threads with the same owner
string, where a concurrent thread inserts a new unconfirmed owner into
the hash between retry iterations. The window is narrow but repeatable
under adversarial conditions.
Fix by adding `goto retry` after `oo = NULL` so the already-allocated
`new` is reused on the next iteration rather than overwritten. |
| Uncontrolled resource consumption vulnerability in SE-elektronic GmbH E-DDC3.3 affecting versions 03.07.03 and higher. An attacker could interrupt the availability of the administration panel by sending multiple ICMP packets. |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via deeply nested bencoded input.
bdecode recurses once per nested list or dictionary level with no depth cap, and each recursive call receives the remaining buffer by value while the list and dictionary branches capture the whole remainder, so every live recursion frame keeps its own copy of the shrinking buffer (O(N^2) bytes for an N-deep input). The decoder runs on every untrusted bencode source: .torrent files, BEP09 metadata fetched from peers, DHT messages, and tracker responses.
A bencoded input of roughly 150,000 nested lists (about 150 KB on the wire) drives multi-gigabyte peak memory, so one short message from any peer, or one crafted .torrent file or magnet link, terminates the client. |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix.
The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit.
Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe and sets up chained
handlers using irq_set_chained_handler_and_data(). However, on driver
removal, the generic chips are not freed and the chained handlers are
not removed.
The generic chips remain on the global gc_list and may later be accessed by
generic interrupt chip suspend, resume, or shutdown callbacks after the
driver has been removed, potentially resulting in a use-after-free and
kernel crash.
The chained handlers that were installed in probe for peripheral and
syswake interrupts are also left dangling, which can lead to spurious
interrupts accessing freed memory.
Fix these issues by:
- Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the
core code automatically removes generic chips when irq_domain_remove()
is called
- Clearing all chained handlers with NULL in pdc_intc_remove() |
