| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gso: fix ownership in __udp_gso_segment
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: discard packets if the transport changes
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be
written to the MGBE_WRAP_AXI_ASID0_CTRL register.
The current driver is hard coded to use MGBE0's SID for all controllers.
This causes softirq time outs and kernel panics when using controllers
other than MGBE0.
Example dmesg errors when an ethernet cable is connected to MGBE1:
[ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms
[ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter.
[ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171)
[ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features
[ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock
[ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode
[ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337
[ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8)
[ 181.921878] Sending NMI from CPU 4 to CPUs 7:
[ 181.921886] NMI backtrace for cpu 7
[ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6
[ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024
[ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 181.922847] pc : handle_softirqs+0x98/0x368
[ 181.922978] lr : __do_softirq+0x18/0x20
[ 181.923095] sp : ffff80008003bf50
[ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000
[ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0
[ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70
[ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000
[ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000
[ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d
[ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160
[ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74
[ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1
[ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000
[ 181.967591] Call trace:
[ 181.970043] handle_softirqs+0x98/0x368 (P)
[ 181.974240] __do_softirq+0x18/0x20
[ 181.977743] ____do_softirq+0x14/0x28
[ 181.981415] call_on_irq_stack+0x24/0x30
[ 181.985180] do_softirq_own_stack+0x20/0x30
[ 181.989379] __irq_exit_rcu+0x114/0x140
[ 181.993142] irq_exit_rcu+0x14/0x28
[ 181.996816] el1_interrupt+0x44/0xb8
[ 182.000316] el1h_64_irq_handler+0x14/0x20
[ 182.004343] el1h_64_irq+0x80/0x88
[ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P)
[ 182.012305] cpuidle_enter+0x3c/0x58
[ 182.015980] cpuidle_idle_call+0x128/0x1c0
[ 182.020005] do_idle+0xe0/0xf0
[ 182.023155] cpu_startup_entry+0x3c/0x48
[ 182.026917] secondary_start_kernel+0xdc/0x120
[ 182.031379] __secondary_switched+0x74/0x78
[ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/.
[ 212.985935] rcu: blocking rcu_node structures (internal RCU debug):
[ 212.992758] Sending NMI from CPU 0 to CPUs 7:
[ 212.998539] NMI backtrace for cpu 7
[ 213.004304] CPU: 7 UID: 0 PI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the maximum cell name length
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a
problem occurs if someone actually does that: kafs tries to create a
directory under /proc/net/afs/ with the name of the cell, but that fails
with a warning:
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405
because procfs limits the maximum filename length to 255.
However, the DNS limits the maximum lookup length and, by extension, the
maximum cell name, to 255 less two (length count and trailing NUL).
Fix this by limiting the maximum acceptable cellname length to 253. This
also allows us to be sure we can create the "/afs/.<cell>/" mountpoint too.
Further, split the YFS VL record cell name maximum to be the 256 allowed by
the protocol and ignore the record retrieved by YFSVL.GetCellName if it
exceeds 253. |
| A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster. |
| A flaw was found in the file-fits plugin in GIMP. When processing a FITS image file, the plugin calculates memory allocation sizes using signed 32-bit integers for width and height. If a crafted file sets both values to large values, their product exceeds 2^31 and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when cfitsio subsequently writes a full row of pixels in the buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. |
| A flaw was found in Red Hat Quay's handling of resumable container image layer uploads. The upload process stores intermediate data in the database using a format that, if tampered with, could allow an attacker to execute arbitrary code on the Quay server. |
| A flaw was found in Red Hat Quay's Proxy Cache configuration feature. When an organization administrator configures an upstream registry for proxy caching, Quay makes a network connection to the specified registry hostname without verifying that it points to a legitimate external service. An attacker with organization administrator privileges could supply a crafted hostname to force the Quay server to make requests to internal network services, cloud infrastructure endpoints, or other resources that should not be accessible from the Quay application. |
| A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. |
| A flaw was found in Foreman. This broken access control vulnerability allows an authenticated user with host-edit permissions to retarget an existing lookup value override to a different host. This is achieved by modifying the match field through nested host attributes, effectively bypassing authorisation checks. The consequence is the potential for unauthorised modification of managed host configurations across different organisational and location boundaries. |
| RAOP module accepts unbounded Content-Length values and does not check the pw_array_add() return. |
| Multiple unbounded alloca() calls in the PulseAudio protocol server. |
| A flaw was found in GIMP's PSP file format parser. A double-free condition occurs in the read_layer_block() function when processing a specially crafted PSP file. This could allow an attacker to cause memory corruption, potentially leading to denial of service or arbitrary code execution. |
| A flaw was found in HPLIP (HP Linux Imaging and Printing Software). This vulnerability, an incomplete fix for CVE-2026-8631, may allow a remote attacker to escalate privileges or achieve arbitrary code execution. This can occur through an integer overflow in the hpcups processing path when handling specially crafted print data. |
| Two off-by-one errors in the FreeIPA ipa-otpd daemon's OAuth2 device authorization handler can cause out-of-bounds memory access when processing an oversized response from a configured external OAuth2/OIDC Identity Provider. An attacker who controls or can man-in-the-middle the IdP endpoint may be able to trigger ipa-otpd to write or read one byte past the end of a fixed-size buffer. Exploitation requires FreeIPA to be configured with an external IdP, attacker control or MITM of that IdP, and a user to initiate the OAuth2 device authorization flow. The most likely impact is limited denial of service affecting the ipa-otpd daemon. |
| A vulnerability was discovered in Keycloak's administrative interface that allows certain administrators to see information about groups they shouldn't have access to. When the new Fine-Grained Admin Permissions (FGAP v2) are turned on, an administrator who is allowed to see a specific "role" can also see a list of all groups assigned to that role. The system fails to check if the administrator has permission to see those specific groups. This could allow a restricted administrator to discover "hidden" groups and see their details, such as internal names and custom settings, which might contain sensitive deployment information. |
| A flaw was found in the ClientResource component of Keycloak's admin services when Fine-Grained Admin Permissions (FGAP) v2 is enabled. This issue allows a delegated administrator, who should only have limited control over specific clients, to attach or remove hidden client scopes that they are not authorized to see or manage. As a result, an attacker could inject unauthorized data or permissions into the security tokens issued to end-users, potentially tricking other applications into granting higher levels of access than intended. |
| A flaw was found in the Fine-Grained Admin Permissions (FGAP) v2 implementation within Keycloak's administrative services. When FGAP v2 is enabled, the system fails to properly filter child groups based on the caller's specific permissions when requested through a parent group. This allows a delegated administrator to view details of child groups they are not authorized to access directly, including group names, paths, and custom attributes. |
| A flaw was found in GIMP's Paint Shop Pro (PSP) file format parser. This heap buffer overflow vulnerability allows a remote attacker to cause arbitrary code execution or a denial of service (DoS) by tricking a user into opening a specially crafted PSP image file. The vulnerability occurs because the software incorrectly calculates buffer sizes when processing low bit-depth images, leading to an overwrite of adjacent memory. |
