| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: mali-c55: Fix possible ERR_PTR in enable_streams
The media_pad_remote_pad_unique() function returns either a valid
pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are
enabled, -ENOLINK if no connected pad is found). The return value
was assigned directly to isp->remote_src and dereferenced in the
next line without checking for errors, which could lead to an
ERR_PTR dereference.
Add proper error checking with IS_ERR() before dereferencing the
pointer. Also set isp->remote_src to NULL on error to maintain
consistency with other error paths in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: alvium: fix critical pointer access in alvium_ctrl_init
The current implementation of alvium_ctrl_init creates several controls in
function alvium_ctrl_init and uses the returned pointer without check. That
can cause write access over NULL-pointer for several controls. The reworked
code checks the pointers before adding flags. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: add ioremap return check and cleanup
Add a check for the return value of pci_ioremap_bar()
in cx23885_dev_setup().
If ioremap for BAR0 fails, release the already allocated
PCI memory region,
decrement the device count, and return -ENODEV.
This prevents a potential null pointer dereference and
ensures proper cleanup
on memory mapping failure. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: unwind v4l2 device registration on probe error
If the vpe_top resource is missing, vpe_probe() returns -ENODEV after
v4l2_device_register() has succeeded. Probe failures do not call the
driver's remove callback, so the v4l2 device remains registered on that
error path.
Route that failure through the existing v4l2_device_unregister() unwind
label, matching the other errors after v4l2_device_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: Fix the error code of devm_kzalloc() in vip_probe_slice()
In vip_probe_slice(), the error check for devm_kzalloc() incorrectly
uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer.
Return -ENOMEM for devm_kzalloc() failure. |
| A flaw was found in the Linux kernel's udmabuf device driver, within a fault handler. This issue occurs due to the lack of proper validation of user-supplied data, which can result in memory access past the end of an array. This may allow an attacker to escalate privileges and execute arbitrary code in the context of the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a93434
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix check in amdgpu_hmm_invalidate_gfx
For a short moment during alloc/free the userptr BO is not part of his VM,
so bo->vm_bo can be NULL.
Keep a reference to the VM root PD as parent of the userptr BO so that
we can always use that to wait for all submissions of the VM instead of
only the one involving the userptr BO.
(cherry picked from commit 631849ff5d603841e74f19f4a5e30fe1f7d7cf30) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Preserve rq tracking across local DSQ dispatch
dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while
ops.dispatch() has recorded the current rq. Moving a task to a local DSQ
may switch to the source or destination rq before synchronously invoking
ops.dequeue() through the following path:
SCX_CALL_OP(dispatch, rq)
ops.dispatch()
scx_bpf_dsq_move_to_local()
scx_flush_dispatch_buf()
finish_dispatch()
dispatch_to_local_dsq()
scx_dispatch_enqueue()
local_dsq_post_enq()
call_task_dequeue()
SCX_CALL_OP_TASK(dequeue, locked_rq, ...)
The nested callback saves the recorded rq and restores it on return. If
the rq tracking does not follow the lock switch, update_locked_rq() can
trigger the following lockdep assertion while restoring an rq which is
no longer held:
WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170
Call Trace:
scx_dispatch_enqueue+0x2b0/0x460
dispatch_to_local_dsq+0x138/0x230
scx_flush_dispatch_buf+0x1af/0x220
scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0
bpf__sched_ext_ops_dispatch+0x4b/0xa7
do_pick_task_scx+0x3b6/0x910
__pick_next_task+0x105/0x1f0
__schedule+0x3e7/0x1980
Introduce switch_rq_lock() to update the tracking state together with
each rq lock handoff. Use it in dispatch_to_local_dsq(),
move_remote_task_to_local_dsq() and the in-balance paths of
scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the
rq whose lock is actually held throughout the lock dance. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix race between registration and connection abortion
This fixes this race:
- thread a: io_uring_enter -> register sqe ->
fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref
yet
- thread b: fuse_conn_destroy() -> fuse_chan_abort() ->
fuse_uring_abort() is a no-op due to queue ref being 0
- thread a: grabs the queue_ref, queue_ref is now 1, rest of
fuse_uring_do_register() logic executes
- thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs
and calls
"wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);"
The abort/unmount thread will hang indefinitely in unkillable state as
nothing will decrement queue_refs or wake stop_waitq, and the ring,
queue, and ent are leaked.
Fix this by checking fch->connected under fch->lock after the created
ent has grabbed a ref count on the queue. This ensures that in the
scenario above, it is guaranteed that we either release the queue ref
and wake up stop_waitq (in case fuse_chan_wait_aborted() is already
waiting) in fuse_uring_do_register() when we detect !fch->connected, or
if the connection is aborted after the check, it is guaranteed that the
async teardown worker will be running in the background cleaning up ents
and decrementing the ent's ref on the queue, which will unblock the
eventual queue and ring teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix aperture mapping leak
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
(cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a) |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix irq-disabled in local_bh_enable()
The rxrpc_assess_MTU_size() function calls down into the IP layer to find
out the MTU size for a route. When accepting an incoming call, this is
called from rxrpc_new_incoming_call() which holds interrupts disabled
across the code that calls down to it. Unfortunately, the IP layer uses
local_bh_enable() which, config dependent, throws a warning if IRQs are
enabled:
WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0
...
RIP: 0010:__local_bh_enable_ip+0x43/0xd0
...
Call Trace:
<TASK>
rt_cache_route+0x7e/0xa0
rt_set_nexthop.isra.0+0x3b3/0x3f0
__mkroute_output+0x43a/0x460
ip_route_output_key_hash+0xf7/0x140
ip_route_output_flow+0x1b/0x90
rxrpc_assess_MTU_size.isra.0+0x2a0/0x590
rxrpc_new_incoming_peer+0x46/0x120
rxrpc_alloc_incoming_call+0x1b1/0x400
rxrpc_new_incoming_call+0x1da/0x5e0
rxrpc_input_packet+0x827/0x900
rxrpc_io_thread+0x403/0xb60
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
...
hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (0): copy_process+0xc61/0x2730
softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90
Fix this by moving the call to rxrpc_assess_MTU_size() out of
rxrpc_init_peer() and further up the stack where it can be done without
interrupts disabled.
It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the
locks are dropped as pmtud is going to be performed by the I/O thread - and
we're in the I/O thread at this point. |
