| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix icmp host relookup triggering ip_rt_bug
arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is:
WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
<IRQ>
ip_send_skb+0x14/0x40
__icmp_send+0x42d/0x6a0
ipv4_link_failure+0xe2/0x1d0
arp_error_report+0x3c/0x50
neigh_invalidate+0x8d/0x100
neigh_timer_handler+0x2e1/0x330
call_timer_fn+0x21/0x120
__run_timer_base.part.0+0x1c9/0x270
run_timer_softirq+0x4c/0x80
handle_softirqs+0xac/0x280
irq_exit_rcu+0x62/0x80
sysvec_apic_timer_interrupt+0x77/0x90
The script below reproduces this scenario:
ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \
dir out priority 0 ptype main flag localok icmp
ip l a veth1 type veth
ip a a 192.168.141.111/24 dev veth0
ip l s veth0 up
ping 192.168.141.155 -c 1
icmp_route_lookup() create input routes for locally generated packets
while xfrm relookup ICMP traffic.Then it will set input route
(dst->out = ip_rt_bug) to skb for DESTUNREACH.
For ICMP err triggered by locally generated packets, dst->dev of output
route is loopback. Generally, xfrm relookup verification is not required
on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1).
Skip icmp relookup for locally generated packets to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: support non-r10 register spill/fill to/from stack in precision tracking
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ |
| D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection. |
| A security flaw has been discovered in Open5GS up to 2.7.7. Affected by this issue is the function discover_handler in the library /lib/sbi/nghttp2-server.c of the component NRF. The manipulation results in use after free. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this vulnerability is the function sub_445E7C of the file /goform/formDMZ.cgi. This manipulation causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution. |
| Alkacon OpenCms before 10.5.1 allows remote unauthenticated attackers to obtain sensitive information via a cmis-online/query XXE attack on a Chemistry servlet. |
| A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution. |
| An issue was discovered in Control Web Panel (CWP) before 0.9.8.1209. User input passed via the "key" GET parameter to /admin/index.php (when the "api" parameter is set) is not properly sanitized before being used to execute OS commands. This can be exploited by unauthenticated attackers to inject and execute arbitrary OS commands with the privileges of root on the web server. Softaculous or SitePad must be present. |
| Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in absinthe-graphql absinthe_plug allows reflected cross-site scripting via the GraphiQL interface.
'Elixir.Absinthe.Plug.GraphiQL':js_escape/1 in lib/absinthe/plug/graphiql.ex escapes single quotes and newlines in the query GET parameter before embedding it in an inline JavaScript string, but does not escape backslashes. An attacker can bypass the escaping by prefixing a quote with a backslash (e.g. \'), breaking out of the string context and executing arbitrary JavaScript in the victim's browser.
This issue affects absinthe_plug: from 1.2.0 before 1.5.10. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.1 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with Guest permissions to view issues in projects they were not authorized to access. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.11 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user to inject HTML and JavaScript into email notifications sent to other users due to improper input sanitization. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.5 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted payloads on certain API endpoints. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.5 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted JSON payloads due to insufficient input validation. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 11.9 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by uploading a specially crafted file due to improper validation. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.0 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with a read_api scoped OAuth application to create issues and add comments to issues in private projects due to improper authorization. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.10 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with developer-role permissions to delete protected container registry tags due to improper authorization checks. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 16.10 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that when instance-level approval rule editing prevention was enabled, could have allowed an authenticated user with Maintainer permissions to modify or delete project approval rules due to missing authorization checks. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.6 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with developer-role permissions to bypass PyPI package protection rules and upload restricted packages due to improper authorization checks. |
