| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| sink.c in fetchmail before 6.3.9 allows context-dependent attackers to cause a denial of service (NULL dereference and application crash) by refusing certain warning messages that are sent over SMTP. |
| The JBIG2 decoder in Xpdf 3.02pl2 and earlier, CUPS 1.3.9 and earlier, Poppler before 0.10.6, and other products allows remote attackers to cause a denial of service (crash) via a crafted PDF file that triggers a NULL pointer dereference. |
| The Linux kernel 2.6.20 and 2.6.21 does not properly handle an invalid LDT segment selector in %cs (the xcs field) during ptrace single-step operations, which allows local users to cause a denial of service (NULL dereference and OOPS) via certain code that makes ptrace PTRACE_SETREGS and PTRACE_SINGLESTEP requests, related to the TRACE_IRQS_ON function, and possibly related to the arch_ptrace function. |
| The multipart processor in ModSecurity before 2.5.9 allows remote attackers to cause a denial of service (crash) via a multipart form datapost request with a missing part header name, which triggers a NULL pointer dereference. |
| The spnego_gss_accept_sec_context function in lib/gssapi/spnego/spnego_mech.c in MIT Kerberos 5 (aka krb5) 1.5 through 1.6.3, when SPNEGO is used, allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via invalid ContextFlags data in the reqFlags field in a negTokenInit token. |
| OpenSSL 0.9.8f and 0.9.8g allows remote attackers to cause a denial of service (crash) via a TLS handshake that omits the Server Key Exchange message and uses "particular cipher suites," which triggers a NULL pointer dereference. |
| smtp.c in the c-client library in University of Washington IMAP Toolkit 2007b allows remote SMTP servers to cause a denial of service (NULL pointer dereference and application crash) by responding to the QUIT command with a close of the TCP connection instead of the expected 221 response code. |
| The nfs4_proc_lock function in fs/nfs/nfs4proc.c in the NFSv4 client in the Linux kernel before 2.6.31-rc4 allows remote NFS servers to cause a denial of service (NULL pointer dereference and panic) by sending a certain response containing incorrect file attributes, which trigger attempted use of an open file that lacks NFSv4 state. |
| The ATI Rage 128 (aka r128) driver in the Linux kernel before 2.6.31-git11 does not properly verify Concurrent Command Engine (CCE) state initialization, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly gain privileges via unspecified ioctl calls. |
| The ap_proxy_ftp_handler function in modules/proxy/proxy_ftp.c in the mod_proxy_ftp module in the Apache HTTP Server 2.0.63 and 2.2.13 allows remote FTP servers to cause a denial of service (NULL pointer dereference and child process crash) via a malformed reply to an EPSV command. |
| The d_delete function in fs/ecryptfs/inode.c in eCryptfs in the Linux kernel 2.6.31 allows local users to cause a denial of service (kernel OOPS) and possibly execute arbitrary code via unspecified vectors that cause a "negative dentry" and trigger a NULL pointer dereference, as demonstrated via a Mutt temporary directory in an eCryptfs mount. |
| The lookup_cb_cred function in fs/nfsd/nfs4callback.c in the nfsd4 subsystem in the Linux kernel before 2.6.31.2 attempts to access a credentials cache even when a client specifies the AUTH_NULL authentication flavor, which allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an NFSv4 mount request. |
| GNU Binutils thru 2.46 readelf contains a vulnerability that leads to an invalid pointer free when processing a crafted ELF binary with malformed relocation or symbol data. If dump_relocations returns early due to parsing errors, the internal all_relocations array may remain partially uninitialized. Later, process_got_section_contents() may attempt to free an invalid r_symbol pointer, triggering memory corruption checks in glibc and causing the program to terminate with SIGABRT. No evidence of further memory corruption or code execution was observed; the impact is limited to denial of service. NOTE: this is disputed by third parties because the observed behavior occurred only in pre-release code and did not affect any tagged version. |
| Null pointer dereference in Windows Remote Access Connection Manager allows an unauthorized attacker to deny service locally. |
| jq is a command-line JSON processor. In commits after 69785bf77f86e2ea1b4a20ca86775916889e91c9, the _strindices builtin in jq's src/builtin.c passes its arguments directly to jv_string_indexes() without verifying they are strings, and jv_string_indexes() in src/jv.c relies solely on assert() checks that are stripped in release builds compiled with -DNDEBUG. This allows an attacker to crash jq trivially with input like _strindices(0), and by crafting a numeric value whose IEEE-754 bit pattern maps to a chosen pointer, achieve a controlled pointer dereference and limited memory read/probe primitive. Any deployment that evaluates untrusted jq filters against a release build is vulnerable. This issue has been patched in commit fdf8ef0f0810e3d365cdd5160de43db46f57ed03. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add
The driver does not set hw->sta_data_size, which causes mac80211 to
allocate insufficient space for driver private station data in
__sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of
struct rtl8xxxu_sta_info through sta->drv_priv, this results in a
slab-out-of-bounds write.
KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter:
BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346
Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12
Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during
probe, similar to how hw->vif_data_size is configured. This ensures
mac80211 allocates sufficient space for the driver's per-station
private data.
Tested on StarFive VisionFive 2 v1.2A board. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Avoid creating sub-groups asynchronously
The asynchronous creation of sub-groups by a delayed work could lead to a
NULL pointer dereference when the driver directory is removed before the
work completes.
The crash can be easily reproduced with the following commands:
# cd /sys/kernel/config/pci_ep/functions/pci_epf_test
# for i in {1..20}; do mkdir test && rmdir test; done
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
Call Trace:
configfs_register_group+0x3d/0x190
pci_epf_cfs_work+0x41/0x110
process_one_work+0x18f/0x350
worker_thread+0x25a/0x3a0
Fix this issue by using configfs_add_default_group() API which does not
have the deadlock problem as configfs_register_group() and does not require
the delayed work handler.
[mani: slightly reworded the description and added stable list] |
| The JavaScript engine did not handle closed generators correctly and it was possible to resume them leading to a nullptr deref. This vulnerability was fixed in Firefox 141, Firefox ESR 115.26, Firefox ESR 128.13, Firefox ESR 140.1, Thunderbird 141, Thunderbird 128.13, and Thunderbird 140.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference error in generate_encryptionkey
If client send two session setups with krb5 authenticate to ksmbd,
null pointer dereference error in generate_encryptionkey could happen.
sess->Preauth_HashValue is set to NULL if session is valid.
So this patch skip generate encryption key if session is valid. |
