| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm mpath: Add missing dm_put_device when failing to get scsi dh name
When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in
scsi_dh_attached_handler_name()") added code to fail parsing the path if
scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up
the reference to the path device that had just been taken. Fix this, and
steamline the error paths of parse_path() a little. |
| An off-by-one error (CWE-193) in the ConsumeUnit16Array and ConsumeUnit64Array functions in Velocidex Velociraptor before version 0.76.5 on Windows and Linux allows a local attacker to cause a Denial of Service (DoS) via a process crash by providing a specially crafted .evtx file to the parse_evtx VQL plugin. |
| Starman versions before 0.4018 for Perl allows HTTP Request Smuggling via Improper Header Precedence.
Starman incorrectly prioritizes "Content-Length" over "Transfer-Encoding: chunked" when both headers are present in an HTTP request. Per RFC 7230 3.3.3, Transfer-Encoding must take precedence.
An attacker could exploit this to smuggle malicious HTTP requests via a front-end reverse proxy. |
| A missing permission check in Jenkins Script Security Plugin 1399.ve6a_66547f6e1 and earlier allows attackers with Overall/Read permission to enumerate pending and approved Script Security classpaths. |
| Jenkins Credentials Binding Plugin 719.v80e905ef14eb_ and earlier does not sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node. |
| A vulnerability in the web interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and execute script files on an affected device to obtain root access to the underlying operating system.
This vulnerability is due to an improper system process that is created at boot time. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute a variety of scripts and commands that allow root access to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sysfs: fix chip removal with GPIOs exported over sysfs
Currently if we export a GPIO over sysfs and unbind the parent GPIO
controller, the exported attribute will remain under /sys/class/gpio
because once we remove the parent device, we can no longer associate the
descriptor with it in gpiod_unexport() and never drop the final
reference.
Rework the teardown code: provide an unlocked variant of
gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken
before unregistering the parent device itself. This is done to prevent
any new exports happening before we unregister the device completely. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore: ram_core: fix incorrect success return when vmap() fails
In persistent_ram_vmap(), vmap() may return NULL on failure.
If offset is non-zero, adding offset_in_page(start) causes the function
to return a non-NULL pointer even though the mapping failed.
persistent_ram_buffer_map() therefore incorrectly returns success.
Subsequent access to prz->buffer may dereference an invalid address
and cause crashes.
Add proper NULL checking for vmap() failures. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: xscale: Check for PTP support properly
In ixp4xx_get_ts_info() ixp46x_ptp_find() is called
unconditionally despite this feature only existing on
ixp46x, leading to the following splat from tcpdump:
root@OpenWrt:~# tcpdump -vv -X -i eth0
(...)
Unable to handle kernel NULL pointer dereference at virtual address
00000238 when read
(...)
Call trace:
ptp_clock_index from ixp46x_ptp_find+0x1c/0x38
ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64
ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108
__ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648
__dev_ethtool from dev_ethtool+0x160/0x234
dev_ethtool from dev_ioctl+0x2cc/0x460
dev_ioctl from sock_ioctl+0x1ec/0x524
sock_ioctl from sys_ioctl+0x51c/0xa94
sys_ioctl from ret_fast_syscall+0x0/0x44
(...)
Segmentation fault
Check for ixp46x in ixp46x_ptp_find() before trying to set up
PTP to avoid this.
To avoid altering the returned error code from ixp4xx_hwtstamp_set()
which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP
from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter
the error code. The helper function ixp46x_ptp_find() helper
returns -ENODEV. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Fix error handling on steps after finding a match
Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.
Fix these specific issues:
- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().
- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfs4_file refcount leak in nfsd_get_dir_deleg()
Claude pointed out that there is a nfs4_file refcount leak in
nfsd_get_dir_deleg(). Ensure that the reference to "fp" is released
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
net: consume xmit errors of GSO frames
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link). |
| Jenkins Matrix Authorization Strategy Plugin 2.0-beta-1 through 3.2.9 (both inclusive) invokes parameterless constructors of classes specified in configuration when deserializing inheritance strategies, without restricting the classes that can be instantiated, allowing attackers with Item/Configure permission to instantiate arbitrary types, which may lead to information disclosure or other impacts depending on the classes available on the classpath. |
| A missing permission check in Jenkins GitHub Branch Source Plugin 1967.vdea_d580c1a_b_a_ and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL with attacker-specified GitHub App credentials. |
| An authorization bypass (CWE-639) in the GetUserRoles gRPC API endpoint in Velocidex Velociraptor below version 0.76.5 allows any authenticated low-privilege user to retrieve the complete ACL policy (roles and permissions) for any user across all organizations by supplying targeted Name and Org parameters via a network request. |
| Text::CSV_XS versions before 1.62 for Perl have a use-after-free when registered callbacks extend the Perl argument stack, which may enable type confusion or memory corruption.
The Parse, print, getline, and getline_all methods invoke registered callbacks (for example after_parse, before_print, or on_error) and cache the Perl argument stack pointer across the call. If a callback extends the argument stack enough to trigger a reallocation, the return value is written through the stale pointer into the freed buffer, and the caller reads the original $self argument as the return value instead.
Calling code that expects parsed data from getline_all receives the Text::CSV_XS object in its place, leading to logic errors or crashes. Text::CSV_XS objects used without any registered callbacks are not affected. |
| Redis is an in-memory data structure store. In versions of redis-server up to 8.6.3, the RESTORE command does not properly validate serialized values. An authenticated attacker with permission to execute RESTORE can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This is patched in version 8.6.3. |
| Uncontrolled Search Path Element vulnerability in WatchGuard Agent on Windows allows Using Malicious Files.This issue affects WatchGuard Agent before 1.25.03.0000. |
| Use of Hard-coded Cryptographic Key vulnerability in WatchGuard Agent on Windows allows Inclusion of Code in Existing Process.This issue affects WatchGuard Agent: before 1.25.03.0000. |
| Incorrect permission assignment for a resource in the patch management component of the WatchGuard Agent on Windows allows an authenticated local user to elevate their privileges to NT AUTHORITY\\SYSTEM. |
