| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c569 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix oops due to invalid pointer for kfree() in parse_longname()
This fixes a kernel oops when reading ceph snapshot directories (.snap),
for example by simply running `ls /mnt/my_ceph/.snap`.
The variable str is guarded by __free(kfree), but advanced by one for
skipping the initial '_' in snapshot names. Thus, kfree() is called
with an invalid pointer. This patch removes the need for advancing the
pointer so kfree() is called with correct memory pointer.
Steps to reproduce:
1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)
2. Add cephfs mount to fstab
$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab
3. Reboot the system
$ systemctl reboot
4. Check if it's really mounted
$ mount | grep stuff
5. List snapshots (expected 63 snapshots on my system)
$ ls /mnt/test/stuff/.snap
Now ls hangs forever and the kernel log shows the oops. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.35 and 8.6.50, when a `Parse.Cloud.afterLiveQueryEvent` trigger is registered for a class, the LiveQuery server leaks protected fields and `authData` to all subscribers of that class. Fields configured as protected via Class-Level Permissions (`protectedFields`) are included in LiveQuery event payloads for all event types (create, update, delete, enter, leave). Any user with sufficient CLP permissions to subscribe to the affected class can receive protected field data of other users, including sensitive personal information and OAuth tokens from third-party authentication providers. The vulnerability was caused by a reference detachment bug. When an `afterEvent` trigger is registered, the LiveQuery server converts the event object to a `Parse.Object` for the trigger, then creates a new JSON copy via `toJSONwithObjects()`. The sensitive data filter was applied to the `Parse.Object` reference, but the unfiltered JSON copy was sent to clients. The fix in versions 9.6.0-alpha.35 and 8.6.50 ensures that the JSON copy is assigned back to the response object before filtering, so the filter operates on the actual data sent to clients. As a workaround, remove all `Parse.Cloud.afterLiveQueryEvent` trigger registrations. Without an `afterEvent` trigger, the reference detachment does not occur and protected fields are correctly filtered. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0xd8
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x5
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221 |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zero
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference. |
| Inout EasyRooms Ultimate Edition v1.0 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the guests parameter. Attackers can send POST requests to the search/rentals endpoint with malicious SQL payloads to bypass authentication, extract sensitive data, or modify database contents. |
| Inout EasyRooms Ultimate Edition v1.0 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the location parameter. Attackers can send POST requests to the search/searchdetailed endpoint with malicious SQL payloads in the location field to extract sensitive data or modify database contents. |
| Inout EasyRooms Ultimate Edition v1.0 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the numguest parameter. Attackers can send POST requests to the search/searchdetailed endpoint with malicious SQL payloads to bypass authentication, extract sensitive data, or modify database contents. |
| Inout EasyRooms Ultimate Edition v1.0 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the property1 parameter. Attackers can send POST requests to the search/searchdetailed endpoint with malicious SQL payloads to extract sensitive data or modify database contents. |
| Affected devices do not properly sanitize contents of trace files.
This could allow an attacker to inject code through social engineering an authorized user, who has the function right "Read diagnostics", to import a specially crafted trace file.
The malicious trace file is insufficiently sanitized and malicious code could be executed in the clients browser session and trigger PLC operations via the webserver that the legitimate user is authorized to perform. |
| A vulnerability has been identified in keylime where an attacker can exploit this flaw by registering a new agent using a different Trusted Platform Module (TPM) device but claiming an existing agent's unique identifier (UUID). This action overwrites the legitimate agent's identity, enabling the attacker to impersonate the compromised agent and potentially bypass security controls. |
| ApostropheCMS is an open-source content management framework. Prior to version 4.28.0, the bearer token authentication middleware in `@apostrophecms/express/index.js` (lines 386-389) contains an incorrect MongoDB query that allows incomplete login tokens — where the password was verified but TOTP/MFA requirements were NOT — to be used as fully authenticated bearer tokens. This completely bypasses multi-factor authentication for any ApostropheCMS deployment using `@apostrophecms/login-totp` or any custom `afterPasswordVerified` login requirement. Version 4.28.0 fixes the issue. |
| Kan is an open-source project management tool. In versions 0.5.4 and below, the /api/download/attatchment endpoint has no authentication and no URL validation. The Attachment Download endpoint accepts a user-supplied URL query parameter and passes it directly to fetch() server-side, and returns the full response body. An unauthenticated attacker can use this to make HTTP requests from the server to internal services, cloud metadata endpoints, or private network resources. This issue has been fixed in version 0.5.5. To workaround this issue, block or restrict access to /api/download/attatchment at the reverse proxy level (nginx, Cloudflare, etc.). |
| OpenClaw versions prior to 2026.2.22 in macOS node-host system.run contain an allowlist bypass vulnerability that allows remote attackers to execute non-allowlisted commands by exploiting improper parsing of command substitution tokens. Attackers can craft shell payloads with command substitution syntax within double-quoted text to bypass security restrictions and execute arbitrary commands on the system. |
| OpenClaw versions prior to 2026.2.19 construct RegExp objects directly from unescaped Feishu mention metadata in the stripBotMention function, allowing regex injection and denial of service. Attackers can craft nested-quantifier patterns or metacharacters in mention metadata to trigger catastrophic backtracking, block message processing, or remove unintended content before model processing. |
| IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 stores potentially sensitive information in configuration files that could be read by a local user. |
| OpenClaw versions prior to 2026.2.21 fail to filter dangerous process-control environment variables from config env.vars, allowing startup-time code execution. Attackers can inject variables like NODE_OPTIONS or LD_* through configuration to execute arbitrary code in the OpenClaw gateway service runtime context. |
| OpenClaw versions prior to 2026.2.23 contain an exec approval bypass vulnerability in allowlist mode where allow-always grants could be circumvented through unrecognized multiplexer shell wrappers like busybox and toybox sh -c commands. Attackers can exploit this by invoking arbitrary payloads under the same multiplexer wrapper to satisfy stored allowlist rules, bypassing intended execution restrictions. |
