| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix memory leak in smb2_open_file()
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Protect curr_xfer check in IRQ handler
Now that all other accesses to curr_xfer are done under the lock,
protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the
spinlock. Without this protection, the following race can occur:
CPU0 (ISR thread) CPU1 (timeout path)
---------------- -------------------
if (!tqspi->curr_xfer)
// sees non-NULL
spin_lock()
tqspi->curr_xfer = NULL
spin_unlock()
handle_*_xfer()
spin_lock()
t = tqspi->curr_xfer // NULL!
... t->len ... // NULL dereference!
With this patch, all curr_xfer accesses are now properly synchronized.
Although all accesses to curr_xfer are done under the lock, in
tegra_qspi_isr_thread() it checks for NULL, releases the lock and
reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer().
There is a potential for an update in between, which could cause a NULL
pointer dereference.
To handle this, add a NULL check inside the handlers after acquiring
the lock. This ensures that if the timeout path has already cleared
curr_xfer, the handler will safely return without dereferencing the
NULL pointer. |
| A Use of Uninitialized Variable vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file. |
| The WhatsApp bridge component in Nanobot binds the WebSocket server to all network interfaces (0.0.0.0) on port 3001 by default and does not require authentication for incoming connections. An unauthenticated remote attacker with network access to the bridge can connect to the WebSocket server to hijack the WhatsApp session. This allows the attacker to send messages on behalf of the user, intercept all incoming messages and media in real-time, and capture authentication QR codes. |
| Smoothwall Express 3.1-SP4-polar-x86_64-update9 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts by submitting crafted input to the xtaccess.cgi endpoint. Attackers can inject script payloads through the EXT, DEST_PORT, or COMMENT parameters via POST requests to execute arbitrary JavaScript in victim browsers. |
| Maypole versions from 2.10 through 2.13 for Perl generates session ids insecurely. The session id is seeded with the system time (which is available from HTTP response headers), a call to the built-in rand() function, and the PID. |
| An issue in Datart v1.0.0-rc.3 allows attackers to execute arbitrary code via the url parameter in the JDBC configuration |
| A Server-Side Template Injection (SSTI) vulnerability in the Freemarker template engine of Datart v1.0.0-rc.3 allows authenticated attackers to execute arbitrary code via injecting crafted Freemarker template syntax into the SQL script field. |
| A vulnerability was determined in ZenTao up to 21.7.8. Affected by this vulnerability is the function delete of the file editor/control.php of the component Backup Handler. This manipulation of the argument fileName causes path traversal. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| An issue in the TLS certification mechanism of Guardian Gryphon v01.06.0006.22 allows attackers to execute commands as root. |
| A flaw has been found in Tosei Self-service Washing Machine 4.02. Impacted is an unknown function of the file /cgi-bin/tosei_datasend.php. Executing a manipulation of the argument adr_txt_1 can lead to command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in LigeroSmart up to 6.1.26. The affected element is an unknown function of the file /otrs/index.pl. Such manipulation of the argument SortBy leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| ArangoDB Community Edition 3.4.2-1 contains multiple cross-site scripting vulnerabilities in the Aardvark web admin interface (index.html) through search, user management, and API parameters. Attackers can inject scripts via parameters in /_db/_system/_admin/aardvark/index.html to execute JavaScript in authenticated users' browsers. |
| An issue in Visual Studio Code Extensions Markdown Preview Enhanced v0.8.18 allows attackers to execute arbitrary code via uploading a crafted .Md file. |
| The Ecwid by Lightspeed Ecommerce Shopping Cart plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 7.0.7. This is due to a missing capability check in the 'save_custom_user_profile_fields' function. This makes it possible for authenticated attackers, with minimal permissions such as a subscriber, to supply the 'ec_store_admin_access' parameter during a profile update and gain store manager access to the site. |
| A vulnerability was found in EFM iptime A6004MX 14.18.2. Affected is the function commit_vpncli_file_upload of the file /cgi/timepro.cgi. The manipulation results in unrestricted upload. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in GeekAI up to 4.2.4. The affected element is the function Download of the file api/handler/net_handler.go. This manipulation of the argument url causes server-side request forgery. Remote exploitation of the attack is possible. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The RegistrationMagic WordPress plugin before 6.0.7.2 does not have proper capability checks, allowing subscribers and above to create forms on the site. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in TR7 Cyber Defense Inc. Web Application Firewall allows Phishing.This issue affects Web Application Firewall: from 4.30 through 16022026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| OpenS100 (the reference implementation S-100 viewer) prior to commit 753cf29 contain a remote code execution vulnerability via an unrestricted Lua interpreter. The Portrayal Engine initializes Lua using luaL_openlibs() without sandboxing or capability restrictions, exposing standard libraries such as 'os' and 'io' to untrusted portrayal catalogues. An attacker can provide a malicious S-100 portrayal catalogue containing Lua scripts that execute arbitrary commands with the privileges of the OpenS100 process when a user imports the catalogue and loads a chart. |
