| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Undertow, where URL-encoded request paths can be mishandled during concurrent requests on the AJP listener. This issue arises because the same buffer is used to decode the paths for multiple requests simultaneously, leading to incorrect path information being processed. As a result, the server may attempt to access the wrong path, causing errors such as "404 Not Found" or other application failures. This flaw can potentially lead to a denial of service, as legitimate resources become inaccessible due to the path mix-up. |
| A vulnerability was found in the OAuth-server. OAuth-server logs the OAuth2 client secret when the logLevel is Debug higher for OIDC/GitHub/GitLab/Google IDPs login options. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. |
| A Denial of Service (DoS) vulnerability exists in the jaraco/zipp library, affecting all versions prior to 3.19.1. The vulnerability is triggered when processing a specially crafted zip file that leads to an infinite loop. This issue also impacts the zipfile module of CPython, as features from the third-party zipp library are later merged into CPython, and the affected code is identical in both projects. The infinite loop can be initiated through the use of functions affecting the `Path` module in both zipp and zipfile, such as `joinpath`, the overloaded division operator, and `iterdir`. Although the infinite loop is not resource exhaustive, it prevents the application from responding. The vulnerability was addressed in version 3.19.1 of jaraco/zipp. |
| A vulnerability was found in Quarkus. In certain conditions related to the CI process, git credentials could be inadvertently published, which could put the git repository at risk. |
| Applications serving static resources through the functional web frameworks WebMvc.fn or WebFlux.fn are vulnerable to path traversal attacks. An attacker can craft malicious HTTP requests and obtain any file on the file system that is also accessible to the process in which the Spring application is running.
Specifically, an application is vulnerable when both of the following are true:
* the web application uses RouterFunctions to serve static resources
* resource handling is explicitly configured with a FileSystemResource location
However, malicious requests are blocked and rejected when any of the following is true:
* the Spring Security HTTP Firewall https://docs.spring.io/spring-security/reference/servlet/exploits/firewall.html is in use
* the application runs on Tomcat or Jetty |
| A flaw was found in Undertow, which incorrectly parses cookies with certain value-delimiting characters in incoming requests. This issue could allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie values or spoof arbitrary additional cookie values, leading to unauthorized data access or modification. The main threat from this flaw impacts data confidentiality and integrity. |
| path-to-regexp turns path strings into a regular expressions. In certain cases, path-to-regexp will output a regular expression that can be exploited to cause poor performance. Because JavaScript is single threaded and regex matching runs on the main thread, poor performance will block the event loop and lead to a DoS. The bad regular expression is generated any time you have two parameters within a single segment, separated by something that is not a period (.). For users of 0.1, upgrade to 0.1.10. All other users should upgrade to 8.0.0. |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| setuid() does not affect libuv's internal io_uring operations if initialized before the call to setuid().
This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid().
This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21. |
| Applications that use UriComponentsBuilder to parse an externally provided URL (e.g. through a query parameter) AND perform validation checks on the host of the parsed URL may be vulnerable to a open redirect https://cwe.mitre.org/data/definitions/601.html attack or to a SSRF attack if the URL is used after passing validation checks. |
| OpenIPMI before 2.0.36 has an out-of-bounds array access (for authentication type) in the ipmi_sim simulator, resulting in denial of service or (with very low probability) authentication bypass or code execution. |
| A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures. Specifically, when the Vert.x HTTP client establishes connections to different hosts, triggering the memory leak. The leak can be accelerated with intimate runtime knowledge, allowing an attacker to exploit this vulnerability. For instance, a server accepting arbitrary internet addresses could serve as an attack vector by connecting to these addresses, thereby accelerating the memory leak. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. In versions on the 4.x branch prior to version 4.0.5, when parsing compact JWS or JWE input, Go JOSE could use excessive memory. The code used strings.Split(token, ".") to split JWT tokens, which is vulnerable to excessive memory consumption when processing maliciously crafted tokens with a large number of `.` characters. An attacker could exploit this by sending numerous malformed tokens, leading to memory exhaustion and a Denial of Service. Version 4.0.5 fixes this issue. As a workaround, applications could pre-validate that payloads passed to Go JOSE do not contain an excessive number of `.` characters. |
| EDK2 contains a vulnerability when S3 sleep is activated where an Attacker may cause a Division-By-Zero due to a UNIT32 overflow via local access. A successful exploit of this vulnerability may lead to a loss of Availability. |
| In Node.js, the `ReadFileUtf8` internal binding leaks memory due to a corrupted pointer in `uv_fs_s.file`: a UTF-16 path buffer is allocated but subsequently overwritten when the file descriptor is set. This results in an unrecoverable memory leak on every call. Repeated use can cause unbounded memory growth, leading to a denial of service.
Impact:
* This vulnerability affects APIs relying on `ReadFileUtf8` on Node.js release lines: v20 and v22. |
| An issue was discovered in ECCurve.java and ECCurve.cs in Bouncy Castle Java (BC Java) before 1.78, BC Java LTS before 2.73.6, BC-FJA before 1.0.2.5, and BC C# .Net before 2.3.1. Importing an EC certificate with crafted F2m parameters can lead to excessive CPU consumption during the evaluation of the curve parameters. |
| The HL7 FHIR Core Artifacts repository provides the java core object handling code, with utilities (including validator), for the Fast Healthcare Interoperability Resources (FHIR) specification. Prior to version 6.3.23, XSLT transforms performed by various components are vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag could produce XML containing data from the host system. This impacts use cases where org.hl7.fhir.core is being used to within a host where external clients can submit XML. This issue has been patched in release 6.3.23. No known workarounds are available. |
