| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Libsixel prior to v1.8.3 contains a stack buffer overflow in the function gif_process_raster at fromgif.c. |
| An issue was discovered in libsixel 1.8.2. There is a heap-based buffer overflow in the function sixel_decode_raw_impl at fromsixel.c. |
| An issue was discovered in libsixel 1.8.4. There is a heap-based buffer overflow in the function gif_init_frame at fromgif.c. |
| libsixel 1.8.6 is affected by Buffer Overflow in libsixel/src/quant.c:876. |
| An issue was discovered in libsixel 1.8.4. There is a heap-based buffer overflow in the function gif_out_code at fromgif.c. |
| A heap-based buffer overflow was discovered in image_buffer_resize in fromsixel.c in libsixel before 1.8.4. |
| Libsixel 1.8.3 contains a heap-based buffer overflow in the sixel_encode_highcolor function in tosixel.c. |
| Libsixel 1.8.2 contains a heap-based buffer overflow in the dither_func_fs function in tosixel.c. |
| The
iSherlock developed by HGiga has an OS Command Injection vulnerability, allowing unauthenticated local attackers to inject arbitrary OS commands and execute them on the server. |
| A resample query can be used to trigger out-of-memory crashes in Grafana. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test. |
| A heap buffer overflow in the av_bprint_finalize() function of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Flowsint is an open-source OSINT graph exploration tool designed for cybersecurity investigation, transparency, and verification. Flowsint allows a user to create investigations, which are used to manage sketches and analyses. Sketches have controllable graphs, which are comprised of nodes and relationships. The sketches contain information on an OSINT target (usernames, websites, etc) within these nodes and relationships. The nodes can have automated processes execute on them called 'transformers'. A remote attacker can create a sketch, then trigger the 'org_to_asn' transform on an organization node to execute arbitrary OS commands as root on the host machine via shell metacharacters and a docker container escape. Commit b52cbbb904c8013b74308d58af88bc7dbb1b055c appears to remove the code that causes this issue. |
| A heap buffer overflow vulnerability exists in the Netwide Assembler (NASM) due to a lack of bounds checking in the obj_directive() function. This vulnerability can be exploited by a user assembling a malicious .asm file, potentially leading to heap memory corruption, denial of service (crash), and arbitrary code execution. |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, endpoints.GetSessionCookie parses an attacker-supplied cookie chunk count and calls make([]string, count) with no upper bound before any token validation occurs. The function is reached on every request to an OAuth-protected proxy share, allowing an unauthenticated remote attacker to trigger gigabyte-scale heap allocations per request, leading to process-level OOM termination or repeated goroutine panics. Both publicProxy and dynamicProxy are affected. Version 2.0.1 patches the issue. |
| Podman is a tool for managing OCI containers and pods. Versions 4.8.0 through 5.8.1 contain a command injection vulnerability in the HyperV machine backend in pkg/machine/hyperv/stubber.go, where the VM image path is inserted into a PowerShell double-quoted string without sanitization, allowing $() subexpression injection. Because PowerShell evaluates subexpressions inside double-quoted strings before executing the outer command, an attacker who can control the VM image path through a crafted machine name or image directory can execute arbitrary PowerShell commands with the privileges of the Podman process. On typical Windows installations this means SYSTEM-level code execution, and only Windows is affected as the code is exclusive to the HyperV backend. This issue has been patched in version 5.8.2. |
| FreePBX api module version 17.0.8 and prior contain a command injection vulnerability in the initiateGqlAPIProcess() function where GraphQL mutation input fields are passed directly to shell_exec() without sanitization or escaping. An authenticated user with a valid bearer token can send a GraphQL moduleOperations mutation with backtick-wrapped commands in the module field to execute arbitrary commands on the underlying host as the web server user. |
