| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. A remote, unauthenticated attacker can exploit this vulnerability by sending a specially crafted ClientHello message with an invalid Pre-Shared Key (PSK) binder value during the TLS handshake. This can lead to a NULL pointer dereference, causing the server to crash and resulting in a remote Denial of Service (DoS) condition. |
| A flaw was found in GNUPlot. A segmentation fault via IO_str_init_static_internal may jeopardize the environment. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
sqe->len is __u32 but gets stored into sr->len which is int. When
userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF),
sr->len overflows to a negative value. This negative value propagates
through the bundle recv/send path:
1. io_recv(): sel.val = sr->len (ssize_t gets -1)
2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets
0xFFFFFFFFFFFFFFFF)
3. io_ring_buffers_peek(): buf->len is not clamped because max_len
is astronomically large
4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs()
5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1,
causing ret to increase instead of decrease, creating an
infinite loop that reads past the allocated iov[] array
This results in a slab-out-of-bounds read in io_bundle_nbufs() from
the kmalloc-64 slab, as nbufs increments past the allocated iovec
entries.
BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160
Read of size 8 at addr ffff888100ae05c8 by task exp/145
Call Trace:
io_bundle_nbufs+0x128/0x160
io_recv_finish+0x117/0xe20
io_recv+0x2db/0x1160
Fix this by rejecting negative sr->len values early in both
io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32,
any value > INT_MAX indicates overflow and is not a valid length. |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: add seqcount to protect the platform_label{,s} pair
The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have
an inconsistent view of platform_labels vs platform_label in case of a
concurrent resize (resize_platform_label_table, under
platform_mutex). This can lead to OOB accesses.
This patch adds a seqcount, so that we get a consistent snapshot.
Note that mpls_label_ok is also susceptible to this, so the check
against RTA_DST in rtm_to_route_config, done outside platform_mutex,
is not sufficient. This value gets passed to mpls_label_ok once more
in both mpls_route_add and mpls_route_del, so there is no issue, but
that additional check must not be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ignore explicit helper on new expectations
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment
smb2_get_ea() applies 4-byte alignment padding via memset() after
writing each EA entry. The bounds check on buf_free_len is performed
before the value memcpy, but the alignment memset fires unconditionally
afterward with no check on remaining space.
When the EA value exactly fills the remaining buffer (buf_free_len == 0
after value subtraction), the alignment memset writes 1-3 NUL bytes
past the buf_free_len boundary. In compound requests where the response
buffer is shared across commands, the first command (e.g., READ) can
consume most of the buffer, leaving a tight remainder for the QUERY_INFO
EA response. The alignment memset then overwrites past the physical
kvmalloc allocation into adjacent kernel heap memory.
Add a bounds check before the alignment memset to ensure buf_free_len
can accommodate the padding bytes.
This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix
potencial OOB in get_file_all_info() for compound requests") and
commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound
requests"), both of which added bounds checks before unconditional
writes in QUERY_INFO response handlers. |
| A security flaw has been discovered in Edimax BR-6208AC 1.02. The impacted element is the function setWAN of the file /goform/setWAN of the component L2TP Mode. The manipulation of the argument L2TPUserName results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
NETIF_F_IPV6_CSUM only advertises support for checksum offload of
packets without IPv6 extension headers. Packets with extension
headers must fall back onto software checksumming. Since TSO
depends on checksum offload, those must revert to GSO.
The below commit introduces that fallback. It always checks
network header length. For tunneled packets, the inner header length
must be checked instead. Extend the check accordingly.
A special case is tunneled packets without inner IP protocol. Such as
RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by
transport header either, so also must revert to the software GSO path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: file: Use kzalloc_flex for aio_cmd
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Mitigate potential OOB by removing bogus memset()
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
[bentiss: changed the return value] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix DMA corruption on long hmac keys
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The rounding was performed, but never actually used for the allocation.
Fix this by replacing kmemdup with kmalloc for a larger buffer,
followed by memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: fix missing data copy and wrong recycle in ZC RX dispatch
emac_dispatch_skb_zc() allocates a new skb via napi_alloc_skb() but
never copies the packet data from the XDP buffer into it. The skb is
passed up the stack containing uninitialized heap memory instead of
the actual received packet, leaking kernel heap contents to userspace.
Copy the received packet data from the XDP buffer into the skb using
skb_copy_to_linear_data().
Additionally, remove the skb_mark_for_recycle() call since the skb is
backed by the NAPI page frag allocator, not page_pool. Marking a
non-page_pool skb for recycle causes the free path to return pages to
a page_pool that does not own them, corrupting page_pool state.
The non-ZC path (emac_rx_packet) does not have these issues because it
uses napi_build_skb() to wrap the existing page_pool page directly,
requiring no copy, and correctly marks for recycle since the page comes
from page_pool_dev_alloc_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
When decrypting data that is not in-place (src != dst), there is
no need to save the high-order sequence bits in dst as it could
simply be re-copied from the source.
However, the data to be hashed need to be rearranged accordingly.
Thanks, |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix regsafe() for pointers to packet
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix soft lockup in mptcp_recvmsg()
syzbot reported a soft lockup in mptcp_recvmsg() [0].
When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not
removed from the sk_receive_queue. This causes sk_wait_data() to always
find available data and never perform actual waiting, leading to a soft
lockup.
Fix this by adding a 'last' parameter to track the last peeked skb.
This allows sk_wait_data() to make informed waiting decisions and prevent
infinite loops when MSG_PEEK is used.
[0]:
watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963]
Modules linked in:
CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:sk_wait_data+0x15/0x190
Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b
RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800
RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101
R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18
R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000
FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0
Call Trace:
<TASK>
mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329
inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891
sock_recvmsg+0x94/0xc0 net/socket.c:1100
__sys_recvfrom+0xb2/0x130 net/socket.c:2256
__x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267
do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131
RIP: 0033:0x7f6e386a4a1d
Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41
RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d
RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004
RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0
R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000
</TASK> |
