| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix non-access data TLB cache flush faults
When a page is not present, we get non-access data TLB faults from
the fdc and fic instructions in flush_user_dcache_range_asm and
flush_user_icache_range_asm. When these occur, the cache line is
not invalidated and potentially we get memory corruption. The
problem was hidden by the nullification of the flush instructions.
These faults also affect performance. With pa8800/pa8900 processors,
there will be 32 faults per 4 KB page since the cache line is 128
bytes. There will be more faults with earlier processors.
The problem is fixed by using flush_cache_pages(). It does the flush
using a tmp alias mapping.
The flush_cache_pages() call in flush_cache_range() flushed too
large a range.
V2: Remove unnecessary preempt_disable() and preempt_enable() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't BUG if someone dirty pages without asking ext4 first
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not clean up repair bio if submit fails
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: add sanity check on allocation size
ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation
size. It triggers one BUG in the __ntfs_malloc function.
Fix this by adding sanity check on ni->attr_list_size. |
| In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: sm712fb: Fix crash in smtcfb_write()
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix warning message due to adisc being flushed
Fix warning message due to adisc being flushed. Linux kernel triggered a
warning message where a different error code type is not matching up with
the expected type. Add additional translation of one error code type to
another.
WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498
qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx]
CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1
..
GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000
NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx]
LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx]
Call Trace:
[c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable)
[c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx]
[c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx]
[c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx]
[c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx]
[c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120
[c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0
[c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100
[c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40
[c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130
[c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [
c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180
[c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60
[c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20]
[c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290
[c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0
[c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330
[c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130
[c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0
[c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix premature hw access after PCI error
After a recoverable PCI error has been detected and recovered, qla driver
needs to check to see if the error condition still persist and/or wait
for the OS to give the resume signal.
Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440
qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]
Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60
[qla2xxx]
Sep 8 22:26:03 localhost kernel: Call Trace:
Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160
[qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120
[qla2xxx]
Sep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80
Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80
Sep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90
Sep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0
Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240
Sep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0
Sep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360
..
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI
disconnect.
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:
qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to
capture FW dump
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,
waited 5221 msecs
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio
enabled returning.
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX
Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5
mb[0-3]=[0xffff 0xffff 0xffff 0xffff] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix scheduling while atomic
The driver makes a call into midlayer (fc_remote_port_delete) which can put
the thread to sleep. The thread that originates the call is in interrupt
context. The combination of the two trigger a crash. Schedule the call in
non-interrupt context where it is more safe.
kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000
kernel: Call Trace:
kernel: <IRQ>
kernel: dump_stack+0x66/0x81
kernel: __schedule_bug.cold.90+0x5/0x1d
kernel: __schedule+0x7af/0x960
kernel: schedule+0x28/0x80
kernel: schedule_timeout+0x26d/0x3b0
kernel: wait_for_completion+0xb4/0x140
kernel: ? wake_up_q+0x70/0x70
kernel: __wait_rcu_gp+0x12c/0x160
kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod]
kernel: synchronize_sched+0x6c/0x80
kernel: ? call_rcu_bh+0x20/0x20
kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10
kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod]
kernel: starget_for_each_device+0x85/0xb0 [scsi_mod]
kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod]
kernel: scsi_init_io+0x388/0x3d0 [scsi_mod]
kernel: device_for_each_child+0x54/0x90
kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc]
kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx]
kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx]
kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx]
kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx]
kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx]
kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx]
kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx]
kernel: __handle_irq_event_percpu+0x40/0x180
kernel: handle_irq_event_percpu+0x30/0x80
kernel: handle_irq_event+0x36/0x60 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020
[ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1
[ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[ 12.356356] Call Trace:
[ 12.358821] dump_stack_lvl+0x34/0x44
[ 12.362514] check_preemption_disabled+0xd9/0xe0
[ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40
[ 12.384284] local_pci_probe+0x42/0x80
[ 12.390162] ? pci_match_device+0xd7/0x110
[ 12.396366] pci_device_probe+0xfd/0x1b0
[ 12.402372] really_probe+0x1e7/0x3e0
[ 12.408114] __driver_probe_device+0xfe/0x180
[ 12.414544] driver_probe_device+0x1e/0x90
[ 12.420685] __driver_attach+0xc0/0x1c0
[ 12.426536] ? __device_attach_driver+0xe0/0xe0
[ 12.433061] ? __device_attach_driver+0xe0/0xe0
[ 12.439538] bus_for_each_dev+0x78/0xc0
[ 12.445294] bus_add_driver+0x12b/0x1e0
[ 12.451021] driver_register+0x8f/0xe0
[ 12.456631] ? 0xffffffffc07bc000
[ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx]
[ 12.468776] do_one_initcall+0x44/0x200
[ 12.474401] ? load_module+0xad3/0xba0
[ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410
[ 12.486268] do_init_module+0x5c/0x280
[ 12.491730] __do_sys_init_module+0x12e/0x1b0
[ 12.497785] do_syscall_64+0x3b/0x90
[ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 12.509764] RIP: 0033:0x7f554f73ab2e |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt
This event is just specified for SCO and eSCO link types.
On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR
of an existing LE connection, LE link type and a status that triggers the
second case of the packet processing a NULL pointer dereference happens,
as conn->link is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Ignore multiple conn complete events
When one of the three connection complete events is received multiple
times for the same handle, the device is registered multiple times which
leads to memory corruptions. Therefore, consequent events for a single
connection are ignored.
The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET
is introduced to identify new connections. To make sure the events do not
contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks
are introduced.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum: Guard against invalid local ports
When processing events generated by the device's firmware, the driver
protects itself from events reported for non-existent local ports, but
not for the CPU port (local port 0), which exists, but does not have all
the fields as any local port.
This can result in a NULL pointer dereference when trying access
'struct mlxsw_sp_port' fields which are not initialized for CPU port.
Commit 63b08b1f6834 ("mlxsw: spectrum: Protect driver from buggy firmware")
already handled such issue by bailing early when processing a PUDE event
reported for the CPU port.
Generalize the approach by moving the check to a common function and
making use of it in all relevant places. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mce: Work around an erratum on fast string copy instructions
A rare kernel panic scenario can happen when the following conditions
are met due to an erratum on fast string copy instructions:
1) An uncorrected error.
2) That error must be in first cache line of a page.
3) Kernel must execute page_copy from the page immediately before that
page.
The fast string copy instructions ("REP; MOVS*") could consume an
uncorrectable memory error in the cache line _right after_ the desired
region to copy and raise an MCE.
Bit 0 of MSR_IA32_MISC_ENABLE can be cleared to disable fast string
copy and will avoid such spurious machine checks. However, that is less
preferable due to the permanent performance impact. Considering memory
poison is rare, it's desirable to keep fast string copy enabled until an
MCE is seen.
Intel has confirmed the following:
1. The CPU erratum of fast string copy only applies to Skylake,
Cascade Lake and Cooper Lake generations.
Directly return from the MCE handler:
2. Will result in complete execution of the "REP; MOVS*" with no data
loss or corruption.
3. Will not result in another MCE firing on the next poisoned cache line
due to "REP; MOVS*".
4. Will resume execution from a correct point in code.
5. Will result in the same instruction that triggered the MCE firing a
second MCE immediately for any other software recoverable data fetch
errors.
6. Is not safe without disabling the fast string copy, as the next fast
string copy of the same buffer on the same CPU would result in a PANIC
MCE.
This should mitigate the erratum completely with the only caveat that
the fast string copy is disabled on the affected hyper thread thus
performance degradation.
This is still better than the OS crashing on MCEs raised on an
irrelevant process due to "REP; MOVS*' accesses in a kernel context,
e.g., copy_page.
Injected errors on 1st cache line of 8 anonymous pages of process
'proc1' and observed MCE consumption from 'proc2' with no panic
(directly returned).
Without the fix, the host panicked within a few minutes on a
random 'proc2' process due to kernel access from copy_page.
[ bp: Fix comment style + touch ups, zap an unlikely(), improve the
quirk function's readability. ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: prevent potential spectre v1 gadget
It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix tag leaks on error
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.
Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix task leak in pm8001_send_abort_all()
In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()
In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
mips: ralink: fix a refcount leak in ill_acc_of_setup()
of_node_put(np) needs to be called when pdev == NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix use after free in hci_send_acl
This fixes the following trace caused by receiving
HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without
first checking if conn->type is in fact AMP_LINK and in case it is
do properly cleanup upper layers with hci_disconn_cfm:
==================================================================
BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50
Read of size 8 at addr ffff88800e404818 by task bluetoothd/142
CPU: 0 PID: 142 Comm: bluetoothd Not tainted
5.17.0-rc5-00006-gda4022eeac1a #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
kasan_report.cold+0x7f/0x11b
hci_send_acl+0xaba/0xc50
l2cap_do_send+0x23f/0x3d0
l2cap_chan_send+0xc06/0x2cc0
l2cap_sock_sendmsg+0x201/0x2b0
sock_sendmsg+0xdc/0x110
sock_write_iter+0x20f/0x370
do_iter_readv_writev+0x343/0x690
do_iter_write+0x132/0x640
vfs_writev+0x198/0x570
do_writev+0x202/0x280
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05
<48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015
RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77
R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580
RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001
</TASK>
R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0
Allocated by task 45:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
hci_chan_create+0x9a/0x2f0
l2cap_conn_add.part.0+0x1a/0xdc0
l2cap_connect_cfm+0x236/0x1000
le_conn_complete_evt+0x15a7/0x1db0
hci_le_conn_complete_evt+0x226/0x2c0
hci_le_meta_evt+0x247/0x450
hci_event_packet+0x61b/0xe90
hci_rx_work+0x4d5/0xc50
process_one_work+0x8fb/0x15a0
worker_thread+0x576/0x1240
kthread+0x29d/0x340
ret_from_fork+0x1f/0x30
Freed by task 45:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xfb/0x130
kfree+0xac/0x350
hci_conn_cleanup+0x101/0x6a0
hci_conn_del+0x27e/0x6c0
hci_disconn_phylink_complete_evt+0xe0/0x120
hci_event_packet+0x812/0xe90
hci_rx_work+0x4d5/0xc50
process_one_work+0x8fb/0x15a0
worker_thread+0x576/0x1240
kthread+0x29d/0x340
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff88800c0f0500
The buggy address is located 24 bytes inside of
which belongs to the cache kmalloc-128 of size 128
The buggy address belongs to the page:
128-byte region [ffff88800c0f0500, ffff88800c0f0580)
flags: 0x100000000000200(slab|node=0|zone=1)
page:00000000fe45cd86 refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0xc0f0
raw: 0000000000000000 0000000080100010 00000001ffffffff
0000000000000000
raw: 0100000000000200 ffffea00003a2c80 dead000000000004
ffff8880078418c0
page dumped because: kasan: bad access detected
ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
Memory state around the buggy address:
>ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: revisit gc autotuning
as of commit 4608fdfc07e1
("netfilter: conntrack: collect all entries in one cycle")
conntrack gc was changed to run every 2 minutes.
On systems where conntrack hash table is set to large value, most evictions
happen from gc worker rather than the packet path due to hash table
distribution.
This causes netlink event overflows when events are collected.
This change collects average expiry of scanned entries and
reschedules to the average remaining value, within 1 to 60 second interval.
To avoid event overflows, reschedule after each bucket and add a
limit for both run time and number of evictions per run.
If more entries have to be evicted, reschedule and restart 1 jiffy
into the future. |
