| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix icmp host relookup triggering ip_rt_bug
arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is:
WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
<IRQ>
ip_send_skb+0x14/0x40
__icmp_send+0x42d/0x6a0
ipv4_link_failure+0xe2/0x1d0
arp_error_report+0x3c/0x50
neigh_invalidate+0x8d/0x100
neigh_timer_handler+0x2e1/0x330
call_timer_fn+0x21/0x120
__run_timer_base.part.0+0x1c9/0x270
run_timer_softirq+0x4c/0x80
handle_softirqs+0xac/0x280
irq_exit_rcu+0x62/0x80
sysvec_apic_timer_interrupt+0x77/0x90
The script below reproduces this scenario:
ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \
dir out priority 0 ptype main flag localok icmp
ip l a veth1 type veth
ip a a 192.168.141.111/24 dev veth0
ip l s veth0 up
ping 192.168.141.155 -c 1
icmp_route_lookup() create input routes for locally generated packets
while xfrm relookup ICMP traffic.Then it will set input route
(dst->out = ip_rt_bug) to skb for DESTUNREACH.
For ICMP err triggered by locally generated packets, dst->dev of output
route is loopback. Generally, xfrm relookup verification is not required
on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1).
Skip icmp relookup for locally generated packets to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: support non-r10 register spill/fill to/from stack in precision tracking
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ |
| D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection. |
| A vulnerability was identified in xiandafu beetl up to 3.20.2. Affected is an unknown function of the file beetl-classic-integration/beetl-spring-classic/src/main/java/org/beetl/ext/spring/SpELFunction.java of the component SpELFunction. The manipulation leads to improper neutralization of special elements used in an expression language statement. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in AstrBotDevs AstrBot up to 4.23.5. Impacted is the function post_file of the file astrbot/dashboard/routes/chat.py of the component File Upload Handler. The manipulation of the argument filename results in path traversal. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 4.23.6 is recommended to address this issue. The patch is identified as aaec41e5054569ceaa1113593a34da7568e2d211. You should upgrade the affected component. |
| A security vulnerability has been detected in kalcaddle Kodbox up to 1.64. This issue affects the function parseVideoInfo of the file /workspace/source-code/plugins/fileThumb/lib/VideoResize.class.php of the component fileThumb Plugin. The manipulation of the argument ffmpegBin leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Open5GS up to 2.7.7. Affected by this issue is the function discover_handler in the library /lib/sbi/nghttp2-server.c of the component NRF. The manipulation results in use after free. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in Open5GS up to 2.7.7. Affected by this vulnerability is the function ogs_timer_add in the library /src/ausf/nausf-handler.c of the component AUSF. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A security vulnerability has been detected in Sanluan PublicCMS 5.202506.d. Impacted is the function TradeOrderController.pay/TradePaymentController.pay/AccountGatewayComponent.pay of the file publiccms-trade/src/main/java/com/publiccms/controller/web/trade/TradeOrderController.java of the component Trade Payment Flow. The manipulation leads to business logic errors. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Sanluan PublicCMS 5.202506.d. The affected element is the function getSignKey of the file publiccms-core/src/main/java/com/publiccms/logic/component/config/SafeConfigComponent.java. The manipulation of the argument privatefile_key results in use of hard-coded cryptographic key
. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Investintech SlimPDFReader up to 2.0.13. Affected by this vulnerability is the function sub_3B4610 of the file SlimPDFReader.exe. The manipulation results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor responded to the initial vulnerability report by the researcher with a note that the product is discontinued. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability has been found in Open5GS up to 2.7.7. Affected is the function ogs_sbi_client_add in the library /lib/sbi/client.c of the component NRF. The manipulation of the argument client_pool leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this vulnerability is the function sub_445E7C of the file /goform/formDMZ.cgi. This manipulation causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A security flaw has been discovered in Dataease 2.10.20. Impacted is the function SqlparserUtils.transFilter of the file SqlparserUtils.java of the component Data Dashboard. The manipulation results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| WP Learn Manager 1.1.2 contains a stored cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts through the fieldtitle parameter. Attackers can submit POST requests to the jslm_fieldordering page with XSS payloads in the fieldtitle field to execute arbitrary JavaScript when administrators view the field ordering interface. |
| Quick.CMS 6.7 contains a cross-site scripting vulnerability in the sliders form that allows authenticated attackers to inject malicious scripts by submitting XSS payloads through the sDescription parameter. Attackers can craft CSRF forms targeting the admin.php?p=sliders-form endpoint to execute arbitrary JavaScript in victim browsers when the form is submitted. |
| Composr CMS 10.0.34 contains a persistent cross-site scripting vulnerability that allows authenticated administrators to inject malicious scripts through the banner management interface. Attackers with admin credentials can inject XSS payloads in the Description field of the Add banner functionality, which execute for all website visitors when they access the home page. |
| A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution. |
| Alkacon OpenCms before 10.5.1 allows remote unauthenticated attackers to obtain sensitive information via a cmis-online/query XXE attack on a Chemistry servlet. |
