| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: io: Extract user memory type in ioremap_prot()
The only caller of ioremap_prot() outside of the generic ioremap()
implementation is generic_access_phys(), which passes a 'pgprot_t' value
determined from the user mapping of the target 'pfn' being accessed by
the kernel. On arm64, the 'pgprot_t' contains all of the non-address
bits from the pte, including the permission controls, and so we end up
returning a new user mapping from ioremap_prot() which faults when
accessed from the kernel on systems with PAN:
| Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000
| ...
| Call trace:
| __memcpy_fromio+0x80/0xf8
| generic_access_phys+0x20c/0x2b8
| __access_remote_vm+0x46c/0x5b8
| access_remote_vm+0x18/0x30
| environ_read+0x238/0x3e8
| vfs_read+0xe4/0x2b0
| ksys_read+0xcc/0x178
| __arm64_sys_read+0x4c/0x68
Extract only the memory type from the user 'pgprot_t' in ioremap_prot()
and assert that we're being passed a user mapping, to protect us against
any changes in future that may require additional handling. To avoid
falsely flagging users of ioremap(), provide our own ioremap() macro
which simply wraps __ioremap_prot(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix use-after-free on error path
In the error path of sev_tsm_init_locked(), the code dereferences 't'
after it has been freed with kfree(). The pr_err() statement attempts
to access t->tio_en and t->tio_init_done after the memory has been
released.
Move the pr_err() call before kfree(t) to access the fields while the
memory is still valid.
This issue reported by Smatch static analyser |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in cpumap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed
concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __cpu_map_flush() run
atomically with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_flush_to_queue(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double __list_del_clearprev(): after bq->count is reset in
bq_flush_to_queue(), a preempting task can call bq_enqueue() ->
bq_flush_to_queue() on the same bq when bq->count reaches
CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev()
on the same bq->flush_node, the second call dereferences the
prev pointer that was already set to NULL by the first.
2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt
the packet queue while bq_flush_to_queue() is processing it.
The race between task A (__cpu_map_flush -> bq_flush_to_queue) and
task B (bq_enqueue -> bq_flush_to_queue) on the same CPU:
Task A (xdp_do_flush) Task B (cpu_map_enqueue)
---------------------- ------------------------
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush bq->q[] to ptr_ring */
bq->count = 0
spin_unlock(&q->producer_lock)
bq_enqueue(rcpu, xdpf)
<-- CFS preempts Task A --> bq->q[bq->count++] = xdpf
/* ... more enqueues until full ... */
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush to ptr_ring */
spin_unlock(&q->producer_lock)
__list_del_clearprev(flush_node)
/* sets flush_node.prev = NULL */
<-- Task A resumes -->
__list_del_clearprev(flush_node)
flush_node.prev->next = ...
/* prev is NULL -> kernel oops */
Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it
in bq_enqueue() and __cpu_map_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
To reproduce, insert an mdelay(100) between bq->count = 0 and
__list_del_clearprev() in bq_flush_to_queue(), then run reproducer
provided by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix crash when destroying a suspended hardware context
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies 4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fix memory leak in pinconf_generic_parse_dt_config()
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah()
struct irdma_create_ah_resp { // 8 bytes, no padding
__u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx)
__u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK
};
rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata().
The reserved members of the structure were not zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: handle short interrupt urb messages properly
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: validate open interval overlap
[ Upstream commit 648946966a08e4cb1a71619e3d1b12bd7642de7b ]
Open intervals do not have an end element, in particular an open
interval at the end of the set is hard to validate because of it is
lacking the end element, and interval validation relies on such end
element to perform the checks.
This patch adds a new flag field to struct nft_set_elem, this is not an
issue because this is a temporary object that is allocated in the stack
from the insert/deactivate path. This flag field is used to specify that
this is the last element in this add/delete command.
The last flag is used, in combination with the start element cookie, to
check if there is a partial overlap, eg.
Already exists: 255.255.255.0-255.255.255.254
Add interval: 255.255.255.0-255.255.255.255
~~~~~~~~~~~~~
start element overlap
Basically, the idea is to check for an existing end element in the set
if there is an overlap with an existing start element.
However, the last open interval can come in any position in the add
command, the corner case can get a bit more complicated:
Already exists: 255.255.255.0-255.255.255.254
Add intervals: 255.255.255.0-255.255.255.255,255.255.255.0-255.255.255.254
~~~~~~~~~~~~~
start element overlap
To catch this overlap, annotate that the new start element is a possible
overlap, then report the overlap if the next element is another start
element that confirms that previous element in an open interval at the
end of the set.
For deletions, do not update the start cookie when deleting an open
interval, otherwise this can trigger spurious EEXIST when adding new
elements.
Unfortunately, there is no NFT_SET_ELEM_INTERVAL_OPEN flag which would
make easier to detect open interval overlaps. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix crash during turbo disable
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: complete pending data exchange on device close
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies 4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
libie: don't unroll if fwlog isn't supported
The libie_fwlog_deinit() function can be called during driver unload
even when firmware logging was never properly initialized. This led to call
trace:
[ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI
[ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full)
[ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020
[ 148.576182] RIP: 0010:__dev_printk+0x16/0x70
[ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98
[ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202
[ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000
[ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88
[ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000
[ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70
[ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8
[ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000
[ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0
[ 148.576252] Call Trace:
[ 148.576258] <TASK>
[ 148.576269] _dev_warn+0x7c/0x96
[ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog]
[ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe]
[ 148.576342] pci_device_remove+0x42/0xb0
[ 148.576354] device_release_driver_internal+0x19c/0x200
[ 148.576365] driver_detach+0x48/0x90
[ 148.576372] bus_remove_driver+0x6d/0xf0
[ 148.576383] pci_unregister_driver+0x2e/0xb0
[ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe]
[ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0
[ 148.576446] do_syscall_64+0x7f/0x980
It can be reproduced by trying to unload ixgbe driver in recovery mode.
Fix that by checking if fwlog is supported before doing unroll. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix NULL pointer dereference of mgmt_chann
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it. |
