| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via
set_capacity_and_notify() without checking if it is NULL.
ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only
assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs
(ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE
handler performs no state validation, a user can trigger a NULL pointer
dereference by sending UPDATE_SIZE to a device that has been added but
not yet started, or one that has been stopped.
Fix this by checking ub->ub_disk under ub->mutex before dereferencing
it, and returning -ENODEV if the disk is not available. |
| 18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. Versions prior to 3.9.3 allow an unauthenticated HTTP client to pollute Object.prototype in the Node.js process hosting the middleware, via two unvalidated entry points that reach internal object-key writes: getResourcesHandler and missingKeyHandler. This can break authorisation checks (if (user.isAdmin) returning true for any user), cause type-confusion DoS, and depending on downstream code it can be chained into RCE. |
| In th30d4y/IP from version 1.0.1 to before version 2.0.1, a DOM-Based Cross-Site Scripting (XSS) vulnerability was identified in an IP Reputation Checker application. Unsanitized user input was directly rendered in the browser, allowing attackers to execute arbitrary JavaScript. This issue has been patched in version 2.0.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| Inefficient Algorithmic Complexity vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via quadratic fragment-name uniqueness validation.
'Elixir.Absinthe.Phase.Document.Validation.UniqueFragmentNames':run/2 iterates over all fragments and for each one calls duplicate?/2, which evaluates Enum.count(fragments, &(&1.name == name)) — a full linear scan of the fragment list. The result is O(N²) comparisons per document, where N is the number of fragment definitions supplied by the caller.
Because input.fragments is built directly from the GraphQL query body, N is fully attacker-controlled. A minimum-size fragment definition is roughly 16 bytes, so a ~1 MB document carries ~60,000 fragments and forces ~3.6 × 10⁹ comparisons inside this single validation phase. No authentication, schema knowledge, or special configuration is required.
This issue affects absinthe: from 1.2.0 before 1.10.2. |
| Allocation of Resources Without Limits or Throttling vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via atom table exhaustion when parsing attacker-controlled GraphQL SDL.
Multiple Blueprint.Draft.convert/2 implementations in Absinthe's SDL language modules call String.to_atom/1 on attacker-controlled names from parsed GraphQL SDL documents, including directive names, field names, type names, and argument names. Because atoms are never garbage-collected and the BEAM atom table has a fixed limit (default 1,048,576), each unique name permanently consumes one slot. An attacker can exhaust the atom table by submitting SDL documents containing enough unique names, causing the Erlang VM to abort with system_limit and taking down the entire node.
Any application that passes attacker-controlled GraphQL SDL through Absinthe's parser is exposed — for example, a schema-upload endpoint, a federation gateway that ingests remote SDL, or any developer tool that runs the parser over user-supplied documents.
This issue affects absinthe: from 1.5.0 before 1.10.2. |
| i18next-locize-backend is a simple i18next backend for locize.com which can be used in Node.js, in the browser and for Deno. Prior to version 9.0.2, i18next-locize-backend interpolates lng, ns, projectId, and version directly into the configured loadPath / privatePath / addPath / updatePath / getLanguagesPath URL templates with no path-component validation and no encoding. When an application exposes any of these values to user-controlled input (?lng= / ?ns= query parameters via i18next-browser-languagedetector, cookies, request headers, or a URL-derived projectId), a crafted value can change the structure of the outgoing request URL. Affected call sites in lib/index.js (pre-patch): the interpolate() helper is used at the five URL-build sites — _readAny/read (line 415 for private, 426 for public), getLanguages (lines 271 and 296), and writePage (lines 616 and 622) for the missing-key and update POST paths. The helper interpolate in lib/utils.js substitutes raw values with no encoding. This issue has been patched in version 9.0.2. |
| openvpn-auth-oauth2 is a plugin/management interface client for OpenVPN server to handle an OIDC based single sign-on (SSO) auth flows. From version 1.26.3 to before version 1.27.3, when openvpn-auth-oauth2 is deployed in the experimental plugin mode (shared library loaded by OpenVPN via the plugin directive), clients that do not support WebAuth/SSO (e.g., the openvpn CLI on Linux) are incorrectly admitted to the VPN despite being denied by the authentication logic. The default management-interface mode is not affected because it does not use the OpenVPN plugin return-code mechanism. This issue has been patched in version 1.27.3. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init()
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| Dolibarr is an enterprise resource planning (ERP) and customer relationship management (CRM) software package. Versions 22.0.2 and earlier contains an authenticated remote code execution vulnerability in the user extrafields functionality. User-controlled input from the "computed value" field is passed to PHP's `eval()` function without adequate sanitization, allowing authenticated administrators to execute arbitrary PHP code on the server. As of time of publication, no patched versions are available. |
| Password Pusher is an open source application to communicate sensitive information over the web. Prior to versions 1.69.3 and 2.4.2, a security issue in OSS PasswordPusher allowed unauthenticated creation of file-type pushes through a generic JSON API create path under certain configurations. This could bypass the intended authentication boundary for file push creation. This issue has been patched in versions 1.69.3 and 2.4.2. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-QUIC (DoQ) server can be driven into unbounded goroutine and memory growth by a remote client that opens many QUIC streams and sends only 1 byte per stream. When the worker pool is full, CoreDNS still spawns a goroutine per accepted stream to wait for a worker token. Additionally, active workers block indefinitely in io.ReadFull() with no per-stream read deadline, allowing an attacker to pin all workers by sending a single byte so the read blocks waiting for the second byte of the DoQ length prefix. This enables an unauthenticated remote attacker to cause memory exhaustion and OOM-kill. This issue has been fixed in version 1.14.3. No known workarounds exist. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the tsig plugin can be bypassed on non-plain-DNS transports (DoT, DoH, DoH3, DoQ, and gRPC) because it trusts the transport writer's TsigStatus() instead of performing verification itself. The DoH and DoH3 writer's TsigStatus() always returns nil, the DoT server does not set TsigSecret on the dns.Server, and the DoQ and gRPC writers also unconditionally return nil. This allows an unauthenticated remote client to bypass TSIG-based authentication and access resources intended to be restricted behind a tsig require all policy. Plain DNS over TCP and UDP are not affected. This issue has been fixed in version 1.14.3. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()
[BUG]
There is a bug report that when btrfs hits ENOSPC error in a critical
path, btrfs flips RO (this part is expected, although the ENOSPC bug
still needs to be addressed).
The problem is after the RO flip, if there is a read repair pending, we
can hit the ASSERT() inside btrfs_repair_io_failure() like the following:
BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1
------------[ cut here ]------------
BTRFS: Transaction aborted (error -28)
WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844
Modules linked in: kvm_intel kvm irqbypass
[...]
---[ end trace 0000000000000000 ]---
BTRFS info (device vdc state EA): 2 enospc errors during balance
BTRFS info (device vdc state EA): balance: ended with status: -30
BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6
BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0
[...]
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
------------[ cut here ]------------
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
kernel BUG at fs/btrfs/bio.c:938!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full)
Tainted: [W]=WARN, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Workqueue: btrfs-endio simple_end_io_work
RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120
RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246
RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff
RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988
R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310
R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000
FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
------------[ cut here ]------------
[CAUSE]
The cause of -ENOSPC error during the test case btrfs/124 is still
unknown, although it's known that we still have cases where metadata can
be over-committed but can not be fulfilled correctly, thus if we hit
such ENOSPC error inside a critical path, we have no choice but abort
the current transaction.
This will mark the fs read-only.
The problem is inside the btrfs_repair_io_failure() path that we require
the fs not to be mount read-only. This is normally fine, but if we are
doing a read-repair meanwhile the fs flips RO due to a critical error,
we can enter btrfs_repair_io_failure() with super block set to
read-only, thus triggering the above crash.
[FIX]
Just replace the ASSERT() with a proper return if the fs is already
read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove()
In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it
may be NULL:
if (!jdi)
mipi_dsi_detach(dsi);
However, when jdi is NULL, the function does not return and continues by
calling jdi_panel_disable():
err = jdi_panel_disable(&jdi->base);
Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can
lead to a NULL-pointer dereference:
struct jdi_panel *jdi = to_panel_jdi(panel);
backlight_disable(jdi->backlight);
To prevent such a potential NULL-pointer dereference, return early from
jdi_panel_dsi_remove() when jdi is NULL. |
