| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock"
This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1.
Under rare circumstances, multiple udev threads can collect i801 device
info on boot and walk i801_acpi_io_handler somewhat concurrently. The
first will note the area is reserved by acpi to prevent further touches.
This ultimately causes the area to be deregistered. The second will
enter i801_acpi_io_handler after the area is unregistered but before a
check can be made that the area is unregistered. i2c_lock_bus relies on
the now unregistered area containing lock_ops to lock the bus. The end
result is a kernel panic on boot with the following backtrace;
[ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102)
[ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 14.971880] #PF: supervisor read access in kernel mode
[ 14.971884] #PF: error_code(0x0000) - not-present page
[ 14.971887] PGD 0 P4D 0
[ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI
[ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1
[ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023
[ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b
[ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282
[ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568
[ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000
[ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028
[ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580
[ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000
[ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000
[ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0
[ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 14.971972] Call Trace:
[ 14.971977] <TASK>
[ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972014] ? __die_body.cold+0x8/0xd
[ 14.972021] ? page_fault_oops+0x132/0x170
[ 14.972028] ? exc_page_fault+0x61/0x150
[ 14.972036] ? asm_exc_page_fault+0x22/0x30
[ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801]
[ 14.972085] acpi_ex_access_region+0x5b/0xd0
[ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0
[ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230
[ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310
[ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110
[ 14.972121] acpi_ds_exec_end_op+0x321/0x510
[ 14.972127] acpi_ps_parse_loop+0xf7/0x680
[ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0
[ 14.972143] acpi_ps_execute_method+0x137/0x270
[ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0
[ 14.972158] acpi_evaluate_object+0x134/0x2f0
[ 14.972164] acpi_evaluate_integer+0x50/0xe0
[ 14.972173] ? vsnprintf+0x24b/0x570
[ 14.972181] acpi_ac_get_state.part.0+0x23/0x70
[ 14.972189] get_ac_property+0x4e/0x60
[ 14.972195] power_supply_show_property+0x90/0x1f0
[ 14.972205] add_prop_uevent+0x29/0x90
[ 14.972213] power_supply_uevent+0x109/0x1d0
[ 14.972222] dev_uevent+0x10e/0x2f0
[ 14.972228] uevent_show+0x8e/0x100
[ 14.972236] dev_attr_show+0x19
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19). |
| In the Linux kernel, the following vulnerability has been resolved:
blktrace: fix __this_cpu_read/write in preemptible context
tracing_record_cmdline() internally uses __this_cpu_read() and
__this_cpu_write() on the per-CPU variable trace_cmdline_save, and
trace_save_cmdline() explicitly asserts preemption is disabled via
lockdep_assert_preemption_disabled(). These operations are only safe
when preemption is off, as they were designed to be called from the
scheduler context (probe_wakeup_sched_switch() / probe_wakeup()).
__blk_add_trace() was calling tracing_record_cmdline(current) early in
the blk_tracer path, before ring buffer reservation, from process
context where preemption is fully enabled. This triggers the following
using blktests/blktrace/002:
blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed]
runtime 0.367s ... 0.437s
something found in dmesg:
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
...
(See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
[ 81.362895] check_preemption_disabled+0xce/0xe0
[ 81.362902] tracing_record_cmdline+0x10/0x40
[ 81.362923] __blk_add_trace+0x307/0x5d0
[ 81.362934] ? lock_acquire+0xe0/0x300
[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30
[ 81.362959] blk_add_trace_bio+0x106/0x1e0
[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0
[ 81.362979] ? lockdep_init_map_type+0x58/0x260
[ 81.362988] submit_bio_wait+0x56/0x90
[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250
[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10
[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0
[ 81.363051] blkdev_read_iter+0xc1/0x140
[ 81.363059] vfs_read+0x20b/0x330
[ 81.363083] ksys_read+0x67/0xe0
[ 81.363090] do_syscall_64+0xbf/0xf00
[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 81.363106] RIP: 0033:0x7f281906029d
[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec
[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d
[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000
[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000
[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000
[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a
[ 81.363142] </TASK>
The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),
and blk_add_trace_rq() paths as well.
The purpose of tracin
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix PM runtime reference leak in fp9931_hwmon_read()
In fp9931_hwmon_read(), if regmap_read() failed, the function returned
the error code without calling pm_runtime_put_autosuspend(), causing
a PM reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: properly drop the usb interface reference on disconnect
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix refcount leak for tagset_refcnt
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
syzbot reported memory leak of struct cred. [0]
nfsd_nl_threads_set_doit() passes get_current_cred() to
nfsd_svc(), but put_cred() is not called after that.
The cred is finally passed down to _svc_xprt_create(),
which calls get_cred() with the cred for struct svc_xprt.
The ownership of the refcount by get_current_cred() is not
transferred to anywhere and is just leaked.
nfsd_svc() is also called from write_threads(), but it does
not bump file->f_cred there.
nfsd_nl_threads_set_doit() is called from sendmsg() and
current->cred does not go away.
Let's use current_cred() in nfsd_nl_threads_set_doit().
[0]:
BUG: memory leak
unreferenced object 0xffff888108b89480 (size 184):
comm "syz-executor", pid 5994, jiffies 4294943386
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 369454a7):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270
prepare_creds+0x22/0x600 kernel/cred.c:185
copy_creds+0x44/0x290 kernel/cred.c:286
copy_process+0x7a7/0x2870 kernel/fork.c:2086
kernel_clone+0xac/0x6e0 kernel/fork.c:2651
__do_sys_clone+0x7f/0xb0 kernel/fork.c:2792
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add allocation failure check for Entity name
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()
l3mdev_master_dev_rcu() can return NULL when the slave device is being
un-slaved from a VRF. All other callers deal with this, but we lost
the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()
with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on
device with address").
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418)
Call Trace:
ip6_pol_route (net/ipv6/route.c:2318)
fib6_rule_lookup (net/ipv6/fib6_rules.c:115)
ip6_route_output_flags (net/ipv6/route.c:2607)
vrf_process_v6_outbound (drivers/net/vrf.c:437)
I was tempted to rework the un-slaving code to clear the flag first
and insert synchronize_rcu() before we remove the upper. But looks like
the explicit fallback to loopback_dev is an established pattern.
And I guess avoiding the synchronize_rcu() is nice, too. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
