| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix RESPONSE authenticator parser OOB read
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
BUG: KASAN: slab-out-of-bounds in rxgk_verify_response()
Call Trace:
dump_stack_lvl() [lib/dump_stack.c:123]
print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482]
kasan_report() [mm/kasan/report.c:597]
rxgk_verify_response()
[net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Allocated by task 54:
rxgk_verify_response()
[include/linux/slab.h:954 net/rxrpc/rxgk.c:1155
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
Convert the byte count to __be32 units before constructing the parser
limit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. |
| Issue summary: Applications using AES-CFB128 encryption or decryption on
systems with AVX-512 and VAES support can trigger an out-of-bounds read
of up to 15 bytes when processing partial cipher blocks.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not written to output.
The vulnerable code path is only reached when processing partial blocks
(when a previous call left an incomplete block and the current call provides
fewer bytes than needed to complete it). Additionally, the input buffer
must be positioned at a page boundary with the following page unmapped.
CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or
ChaCha20-Poly1305 instead. For these reasons the issue was assessed as
Low severity according to our Security Policy.
Only x86-64 systems with AVX-512 and VAES instruction support are affected.
Other architectures and systems without VAES support use different code
paths that are not affected.
OpenSSL FIPS module in 3.6 version is affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access. |
| A vulnerability was determined in strukturag libheif up to 1.21.2. This affects the function vvdec_push_data2 of the file libheif/plugins/decoder_vvdec.cc of the component HEIF File Parser. Executing a manipulation of the argument size can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. This patch is called b97c8b5f198b27f375127cd597a35f2113544d03. It is advisable to implement a patch to correct this issue. |
| Incorrect boundary conditions in the DOM: Device Interfaces component. This vulnerability was fixed in Firefox 150, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. |
| Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 145 and Thunderbird 145. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, a buffer overread in `freerdp_image_copy_from_icon_data()` (libfreerdp/codec/color.c) can be triggered by crafted RDP Window Icon (TS_ICON_INFO) data. The bug is reachable over the network when a client processes icon data from an RDP server (or from a man-in-the-middle). Version 3.23.0 fixes the issue. |
| A flaw was found in libsoup’s WebSocket frame processing when handling incoming messages. If a non-default configuration is used where the maximum incoming payload size is unset, the library may read memory outside the intended bounds. This can cause unintended memory exposure or a crash. Applications using libsoup’s WebSocket support with this configuration may be impacted. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. In versions below 7.1.2-189 and 6.9.13-44, when `Magick` parses an XML file it is possible that a single zero byte is written out of the bounds. This issue has been fixed in versions 6.9.13-44 and 7.1.2-19. |
| A specially-crafted file can cause libjxl's decoder to write pixel data to uninitialized unallocated memory. Soon after that data from another uninitialized unallocated region is copied to pixel data.
This can be done by requesting color transformation of grayscale images to another grayscale color space. Buffers allocated for 1-float-per-pixel are used as if they are allocated for 3-float-per-pixel. That happens only if LCMS2 is used as CMS engine. There is another CMS engine available (selected by build flags). |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer overflow write vulnerability exists in ReadYUVImage() (coders/yuv.c) when processing malicious YUV 4:2:2 (NoInterlace) images. The pixel-pair loop writes one pixel beyond the allocated row buffer. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly.
This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). |
| A vulnerability in Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation when processing specific Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to the management interface of an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
Note: Only the out-of-band (OOB) management interface is affected. |
| A flaw was found in the System Security Services Daemon (SSSD). The pam_passkey_child_read_data() function within the PAM passkey responder fails to properly handle raw bytes received from a pipe. Because the data is treated as a NUL-terminated C string without explicit termination, it results in an out-of-bounds read when processed by functions like snprintf(). A local attacker could potentially trigger this vulnerability by initiating a crafted passkey authentication request, causing the SSSD PAM responder to crash, resulting in a local Denial of Service (DoS). |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, a malicious RDP server can trigger a heap buffer overflow in FreeRDP clients using the GDI surface pipeline (e.g., `xfreerdp`) by sending an RDPGFX ClearCodec surface command with an out-of-bounds destination rectangle. The `gdi_SurfaceCommand_ClearCodec()` handler does not call `is_within_surface()` to validate the command rectangle against the destination surface dimensions, allowing attacker-controlled `cmd->left`/`cmd->top` (and subcodec rectangle offsets) to reach image copy routines that write into `surface->data` without bounds enforcement. The OOB write corrupts an adjacent `gdiGfxSurface` struct's `codecs*` pointer with attacker-controlled pixel data, and corruption of `codecs*` is sufficient to reach an indirect function pointer call (`NSC_CONTEXT.decode` at `nsc.c:500`) on a subsequent codec command — full instruction pointer (RIP) control demonstrated in exploitability harness. Users should upgrade to version 3.23.0 to receive a patch. |
| oqs-provider is a provider for the OpenSSL 3 cryptography library that adds support for post-quantum cryptography in TLS, X.509, and S/MIME using post-quantum algorithms from liboqs. Flaws have been identified in the way oqs-provider handles lengths decoded with DECODE_UINT32 at the start of serialized hybrid (traditional + post-quantum) keys and signatures. Unchecked length values are later used for memory reads and writes; malformed input can lead to crashes or information leakage. Handling of plain/non-hybrid PQ key operation is not affected. This issue has been patched in in v0.6.1. All users are advised to upgrade. There are no workarounds for this issue. |
