| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in fetch_jpg() in xdrv_10_scripter.ino in Tasmota through 15.3.0.3 allows a remote attacker to cause heap buffer overflow. The Content-Length from a JPEG stream is stored in a uint16_t variable; values above 65535 wrap around, causing allocation of a smaller buffer than the data actually read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Limit bpf program signature size
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix memory leak in amdgpu_ras_init()
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: greybus: lights: avoid NULL deref
gb_lights_light_config() stores channel_count before allocating the
channels array. If kcalloc() fails, gb_lights_release() iterates the
non-zero count and dereferences light->channels, which is NULL.
Allocate channels first and only then publish channels_count so the
cleanup path can't walk a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, alloc_frozen_pages_nolock() called from NMI context can
re-enter rmqueue() and acquire the zone lock that the interrupted
context is already holding, corrupting the freelists.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
rmqueue.isra.0+0x2a9/0xa70
get_page_from_freelist+0xeb/0x450
alloc_frozen_pages_nolock_noprof+0x111/0x1e0
allocate_slab+0x42a/0x500
___slab_alloc+0xa7/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex
vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the
vdev->cdx_irqs array based on its value, but provides no serialization
against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race
such that one observes config_msi as set while another clears it and
frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free
of the cdx_irqs array.
Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in
vfio_cdx_set_msi_trigger(), which is the single chokepoint through
which all updates to config_msi, cdx_irqs, and msi_count flow, covering
both the ioctl path and the close-device cleanup path. This keeps the
test of config_msi atomic with the subsequent enable, disable, or
trigger operations.
Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part
of this change: the optimization it provided is redundant with the
!config_msi early-return inside vfio_cdx_msi_disable(), and leaving the
test in place would be an unsynchronized read of state the new lock is
meant to protect. |
| In the Linux kernel, the following vulnerability has been resolved:
rxgk: Fix potential integer overflow in length check
Fix potential integer overflow in rxgk_extract_token() when checking the
length of the ticket. Rather than rounding up the value to be tested
(which might overflow), round down the size of the available data. |
| A supply chain attack compromised the official installation packages of DAEMON Tools Lite (Windows versions 12.5.0.2421 through 12.5.0.2434), distributed from the legitimate website daemon-tools.cc between approximately April 8, 2026, and May 5, 2026. Attackers gained unauthorized access to the vendor's (AVB Disc Soft) build or distribution infrastructure and trojanized three binaries: DTHelper.exe, DiscSoftBusServiceLite.exe, and DTShellHlp.exe. These files were digitally signed with the legitimate AVB Disc Soft code-signing certificate, allowing the malicious installers to appear trustworthy and bypass signature-based detection. |
| Heap buffer overflow vulnerability in libjxl 0.12.0 via crafted PBM images to the jxl::extras::DecodeImagePNM function in file lib/extras/dec/pnm.cc. |
| A Cross-Site Request Forgery (CSRF) vulnerability was discovered in the delete.php endpoint of Jason2605 AdminPanel 4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE when accessing forward path array
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid early lgr access in smc_clc_wait_msg
A CLC decline can be received while the handshake is still in an early
stage, before the connection has been associated with a link group.
The decline handling in smc_clc_wait_msg() updates link-group level sync
state for first-contact declines, but that state only exists after link
group setup has completed. Guard the link-group update accordingly and
keep the per-socket peer diagnosis handling unchanged.
This preserves the existing sync_err handling for established link-group
contexts and avoids touching link-group state before it is available. |
| A cross-site request forgery (CSRF) vulnerability in Jenkins Multijob Plugin 662.vd2e0001f6b_b_d and earlier allows attackers to resume failed Multijob builds. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_timeout() and an out-of-bounds
memcpy_toio() that leaks kernel heap memory to the service processor.
Fix with two guards: reject writes smaller than sizeof(struct
dot_command_header) before allocation, then after copying user data
reject commands where the buffer is smaller than the total size declared
by the header (sizeof(header) + command_size + data_size). This ensures
all subsequent header and payload field accesses stay within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()
ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.
A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via
ext2_unlink(), ext2_rename() and ext2_rmdir():
WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295
vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477
do_unlinkat+0x53e/0x730 fs/namei.c:4541
__x64_sys_unlink+0xc6/0x110 fs/namei.c:4587
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rename+0x35e/0x850 fs/ext2/namei.c:374
vfs_rename+0xf2f/0x2060 fs/namei.c:5021
do_renameat2+0xbe2/0xd50 fs/namei.c:5178
__x64_sys_rename+0x7e/0xa0 fs/namei.c:5223
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311
vfs_rmdir+0x204/0x690 fs/namei.c:4348
do_rmdir+0x372/0x3e0 fs/namei.c:4407
__x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Extend the existing i_nlink == 0 check to also catch this case,
reporting the corruption via ext2_error() and returning -EFSCORRUPTED.
This rejects the inode at load time and prevents it from reaching any
of the namei.c paths.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum number of lookups
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device_node leak in mc_probe()
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/actions_addupdatedelete.inc.php |
